component
M24C02-RMN6P
Public Made by Adomby adom
STMicroelectronics EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24C02-RMN6P
STMicroelectronics · EEPROM · SOIC-8
M24C02-RMN6P from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable address bit 0; must be tied to VCC or VSS to set the least-significant bit of the 7-bit I²C device select code (b1); left floating is read as low (0). |
| 2 | E1 | input | Chip Enable address bit 1; must be tied to VCC or VSS to set bit b2 of the 7-bit I²C device select code; left floating is read as low (0). |
| 3 | E2 | input | Chip Enable address bit 2; must be tied to VCC or VSS to set bit b3 of the 7-bit I²C device select code; left floating is read as low (0). |
| 4 | VSS | power_in | Ground reference for VCC supply voltage; decouple VCC to VSS with 10 nF-100 nF capacitor placed close to the package pins. |
| 5 | SDA | bidirectional | Serial Data I/O; open-drain output that may be wire-OR'd with other open-drain signals; requires a pull-up resistor to VCC; input capacitance max 8 pF, output current max 5 mA (IOL), VOL max 0.2 V at IOL = 0.7 mA (VCC = 1.8 V). |
| 6 | SCL | input | Serial Clock input; strobes data on SDA(in) and drives data out on SDA(out); supports up to 400 kHz (Fast-mode) and 100 kHz (Standard-mode); input capacitance max 6 pF. |
| 7 | WC | input | Write Control input; driven high disables write operations to the entire memory array (data bytes are not acknowledged); driven low or left floating enables write operations; input impedance 15-70 kΩ when VIN < 0.3 VCC. |
| 8 | VCC | power_in | Supply voltage; M24C02-R variant operates from 1.8 V to 5.5 V; standby current max 1 µA at VCC = 1.8 V, max 3 µA at VCC = 5.5 V; read current max 0.8 mA at VCC = 1.8 V, fc = 400 kHz. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C02-RMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m24c02-rmn6p-etched.step/m24c02-rmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c02-rmn6p.step/m24c02-rmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
943c0b9f52652f9b, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(text+vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).