main
Ray
Publish 0.1.0
fa4f699
M24C02-FMN6P
STMicroelectronics · EEPROM · SOIC-8
M24C02-FMN6P from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input that sets bit b1 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating. |
| 2 | E1 | input | Chip Enable input that sets bit b2 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating. |
| 3 | E2 | input | Chip Enable input that sets bit b3 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating. |
| 4 | VSS | power_in | Ground; the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O; an open-drain output that requires a pull-up resistor to VCC and may be wire-OR'ed with other open-drain or open-collector signals on the bus. |
| 6 | SCL | input | Serial clock input that strobes data in on SDA and clocks data out on SDA, with a maximum operating clock frequency of 400 kHz. |
| 7 | WC | input | Write Control input; driving it high disables writes to the entire memory array (device select and address bytes are still acknowledged, data bytes are not), while driving it low or leaving it floating enables writes. |
| 8 | VCC | power_in | Supply voltage: for the M24C02-F it operates from 1.7 V to 5.5 V over the full temperature range (1.6 V to 1.7 V only over the reduced 0 °C to 85 °C range), and a decoupling capacitor of about 10 nF to 100 nF should be placed close to the VCC/VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C02-FMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m24c02-fmn6p-etched.step/m24c02-fmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c02-fmn6p.step/m24c02-fmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
943c0b9f52652f9b, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# M24C02-FMN6P
**STMicroelectronics** · EEPROM · SOIC-8
M24C02-FMN6P from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input that sets bit b1 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating. |
| 2 | E1 | input | Chip Enable input that sets bit b2 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating. |
| 3 | E2 | input | Chip Enable input that sets bit b3 of the 7-bit device select code; it must be tied to VCC or VSS, and it reads as low if left floating. |
| 4 | VSS | power_in | Ground; the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O; an open-drain output that requires a pull-up resistor to VCC and may be wire-OR'ed with other open-drain or open-collector signals on the bus. |
| 6 | SCL | input | Serial clock input that strobes data in on SDA and clocks data out on SDA, with a maximum operating clock frequency of 400 kHz. |
| 7 | WC | input | Write Control input; driving it high disables writes to the entire memory array (device select and address bytes are still acknowledged, data bytes are not), while driving it low or leaving it floating enables writes. |
| 8 | VCC | power_in | Supply voltage: for the M24C02-F it operates from 1.7 V to 5.5 V over the full temperature range (1.6 V to 1.7 V only over the reduced 0 °C to 85 °C range), and a decoupling capacitor of about 10 nF to 100 nF should be placed close to the VCC/VSS pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `M24C02-FMN6P`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `m24c02-fmn6p-etched.step` / `m24c02-fmn6p-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `m24c02-fmn6p.step` / `m24c02-fmn6p.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589013449107628033) (42 pp, sha256 `943c0b9f52652f9b`, retrieved 2026-10-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/m24c02-fmn6p-datasheet.pdf)