component
M24C02-DRMN3TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SO-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24C02-DRMN3TP
STMicroelectronics · EEPROM · SO-8
M24C02-DRMN3TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable bit 0; input used to set the three least significant bits (b1) of the 7-bit device select code; must be tied to VCC or VSS; reads low when left floating. |
| 2 | E1 | input | Chip Enable bit 1; input used to set the three least significant bits (b2) of the 7-bit device select code; must be tied to VCC or VSS; reads low when left floating. |
| 3 | E2 | input | Chip Enable bit 2; input used to set the three least significant bits (b3) of the 7-bit device select code; must be tied to VCC or VSS; reads low when left floating. |
| 4 | VSS | power_in | Ground; reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial Data; input/output for I2C bus communication with open-drain output; pull-up resistor to VCC required. |
| 6 | SCL | input | Serial Clock; input used to strobe data on SDA and output data on SDA. |
| 7 | WC | input | Write Control; input to protect memory from inadvertent writes; write operations disabled when driven high; enabled when driven low or left floating. |
| 8 | VCC | power_in | Supply voltage; operating range 1.7 V to 5.5 V per Table 6 operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C02-DRMN3TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m24c02-drmn3tp-etched.step/m24c02-drmn3tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c02-drmn3tp.step/m24c02-drmn3tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (40 pp, sha256
4c3191d92b989b9e, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).