component
M24C01-RMN6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24C01-RMN6TP
STMicroelectronics · EEPROM · SO-8
M24C01-RMN6TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input signal for bit 0 of 7-bit device select code; must be tied to VCC or VSS. |
| 2 | E1 | input | Chip Enable input signal for bit 1 of 7-bit device select code; must be tied to VCC or VSS. |
| 3 | E2 | input | Chip Enable input signal for bit 2 of 7-bit device select code; must be tied to VCC or VSS. |
| 4 | VSS | power_in | Ground reference voltage for VCC supply; low-impedance connection recommended. |
| 5 | SDA | bidirectional | Serial Data line; open-drain output for I2C bus with external pull-up resistor to VCC required for data transfer. |
| 6 | SCL | input | Serial Clock input used to strobe data available on SDA input for I2C bus synchronization. |
| 7 | WC | input | Write Control input; high state disables all write operations to entire memory array; low or floating enables writes. |
| 8 | VCC | power_in | Supply voltage; must be stable within 1.8 to 5.5 V range; recommend 10-100 nF bypass capacitor to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24C01-RMN6TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m24c01-rmn6tp-etched.step/m24c01-rmn6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24c01-rmn6tp.step/m24c01-rmn6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
943c0b9f52652f9b, retrieved 2026-10-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).