component
M24512-DFDW6TP
Public Made by Adomby adom
STMicroelectronics EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM24512-DFDW6TP
STMicroelectronics · EEPROM · TSSOP-8
M24512-DFDW6TP from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip enable input that sets bit b1 of the 7-bit device select code and must be tied to VCC or VSS; when left floating it is read as low (0). |
| 2 | E1 | input | Chip enable input that sets bit b2 of the 7-bit device select code and must be tied to VCC or VSS; when left floating it is read as low (0). |
| 3 | E2 | input | Chip enable input that sets bit b3 of the 7-bit device select code and must be tied to VCC or VSS; when left floating it is read as low (0). |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial data I/O; an open-drain output that may be wire-OR'ed on the bus and requires a pull-up resistor to VCC. |
| 6 | SCL | input | Serial clock input that strobes data on SDA(in) and outputs data on SDA(out). |
| 7 | WC | input | Write control; driving it high disables writes to the entire memory array (device select and address bytes are acknowledged, data bytes are not), while driving it low or leaving it floating enables writes. |
| 8 | VCC | power_in | Supply voltage; for the M24512-DF (order code suffix DF) it is 1.7 V to 5.5 V over -40 °C to 85 °C at up to 1 MHz. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M24512-DFDW6TP - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
m24512-dfdw6tp-etched.step/m24512-dfdw6tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24512-dfdw6tp.step/m24512-dfdw6tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (47 pp, sha256
d69a49224f5d9590, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).