3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM24256-DRMN8TP
STMicroelectronics · EEPROM · SO-8
M24256-DRMN8TP from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | E0 | input | Chip Enable input that sets the least significant bit of the 7-bit device select code and must be tied to VCC or VSS, reading as low (0) when left floating. |
| 2 | E1 | input | Chip Enable input that sets the middle bit of the 7-bit device select code and must be tied to VCC or VSS, reading as low (0) when left floating. |
| 3 | E2 | input | Chip Enable input that sets the most significant of the three chip-enable bits of the device select code and must be tied to VCC or VSS, reading as low (0) when left floating. |
| 4 | VSS | power_in | Ground, the reference for the VCC supply voltage. |
| 5 | SDA | bidirectional | Serial Data input/output with an open-drain output that may be wire-OR'ed on the bus and requires a pull-up resistor to VCC. |
| 6 | SCL | input | Serial Clock input used to strobe data on SDA(in) and to output data on SDA(out). |
| 7 | WC | input | Write Control input that disables write operations to the entire memory array when driven high and enables them when driven low or left floating. |
| 8 | VCC | power_in | Supply voltage pin with operating range 1.7 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST | 26 |
CAD (KiCad official)
- Symbol:
M24256-DRMN8TP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m24256-drmn8tp-etched.step/m24256-drmn8tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m24256-drmn8tp.step/m24256-drmn8tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (42 pp, sha256
3645922ca393ca1e, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).