main
Ray Publish 0.1.0 29a7282

M24128-BFMN6TP

STMicroelectronics · EEPROM · SOIC-8

M24128-BFMN6TP from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 E0 input Chip enable input that sets device select code bit b1; it must be tied to VCC or VSS and is read as low when left floating.
2 E1 input Chip enable input that sets device select code bit b2; it must be tied to VCC or VSS and is read as low when left floating.
3 E2 input Chip enable input that sets device select code bit b3; it must be tied to VCC or VSS and is read as low when left floating.
4 VSS power_in Ground, the reference for the VCC supply voltage.
5 SDA bidirectional Serial data I/O, an open-drain output that requires a pull-up resistor to VCC.
6 SCL input Serial clock input used to strobe data on SDA in and to output data on SDA.
7 WC input Write control; when driven high, write operations to the entire memory array are disabled, and when driven low or left floating they are enabled.
8 VCC power_in Supply voltage; the M24128-BF operates from 1.7 V to 5.5 V over -40 °C to +85 °C.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 1.7 5.5 V Table 8, voltage range F 19
Ambient operating temperature READ TA -40 85 °C READ 19
Ambient operating temperature WRITE TA 0 85 °C WRITE 19
Operating clock frequency fC 400 kHz VCC ≥ 1.6 V 19
Operating clock frequency fC 1000 kHz VCC ≥ 1.7 V 19
Ambient operating temperature TA -40 130 °C 18
Storage temperature TSTG -65 150 °C 18
DC output current IOL 5 mA SDA = 0 18
Input or output range VIO -0.5 6.5 V 18
Supply voltage VCC -0.5 6.5 V 18
Electrostatic pulse (Human Body model) VESD 4000 V Human Body model, AEC-Q100-002 18
Input capacitance (SDA) CIN 8 pF Characterized only 20
Input capacitance (other pins) CIN 6 pF Characterized only 20
Input impedance (E2, E1, E0, WC) low ZL 50 kΩ VIN < 0.3 VCC 20
Input impedance (E2, E1, E0, WC) high ZH 500 kΩ VIN > 0.7 VCC 20
Write cycle endurance Ncycle 4e+06 cycles TA ≤ 25 °C, VCC(min) < VCC < VCC(max) 20
Write cycle endurance Ncycle 1.2e+06 cycles TA = 85 °C, VCC(min) < VCC < VCC(max) 20
Data retention 200 Year TA = 55 °C 20
Input leakage current (SCL, SDA, E2, E1, E0) ILI -2 2 µA VIN = VSS or VCC, device in Standby mode 23
Output leakage current ILO -2 2 µA SDA in Hi-Z, external voltage applied on SDA: VSS or VCC 23
Supply current (Read) ICC 0.8 mA VCC = 1.6 V or 0.7 V, fc = 400 kHz 23
Supply current (Read) ICC 2.5 mA VCC = 1.6 V or 0.7 V, fc = 1 MHz 23
Supply current (Write) ICC0 2 mA Value overaged over tW, VCC < 2.5 V 23
Standby supply current ICC1 1 µA Device not selected, VIN = VSS or VCC, VCC = 1.6 V or 0.7 V 23
Input low voltage (SCL, SDA, WC, E2, E1, E0) VIL -0.45 0.25 V VCC < 2.5 V; max printed as 0.25 VCC 23
Input high voltage (SCL, SDA) VIH 0.7 6.5 V VCC < 2.5 V; min printed as 0.7 VCC 23
Input high voltage (WC, E2, E1, E0) VIH 0.7 0.6 V VCC < 2.5 V; min printed as 0.7 VCC, max printed as VCC+0.6 V 23
Output low voltage VOL 0.2 V IOL = 1 mA, VCC = 1.6 V or 1.7 V 23
Clock frequency fC 400 kHz 24
Clock pulse width high tCHCL 600 ns 24
Clock pulse width low tCLCH 1300 ns 24
SDA (out) fall time tQL1QL2 20 300 ns CL = 10 pF 24
Data in setup time tDXCH 100 ns 24
Data in hold time tCLDX 0 ns 24
Data out hold time tCLQX 50 ns 24
Clock low to next data valid (access time) tCLQV 900 ns 24
Start condition setup time tCHDL 600 ns 24
Start condition hold time tDLCL 600 ns 24
Stop condition set up time tCHDH 600 ns 24
Time between Stop condition and next Start condition tDHDL 1300 ns 24
WC set up time (before the Start condition) tWLDL 0 µs WC=0 set up time to enable WRITE 24
WC hold time (after the Stop condition) tDHWH 1 µs WC=0 hold time to enable WRITE 24
Internal Write cycle duration tW 5 ms 24
Pulse width ignored (input filter on SCL and SDA) tNS 50 ns single glitch 24
Clock frequency fC 0 1 MHz 25
Clock pulse width high tCHCL 260 ns 25
Clock pulse width low tCLCH 500 ns 25
SDA (out) fall time tQL1QL2 20 120 ns CL = 10 pF 25
Data in setup time tDXCH 50 ns 25
Data in hold time tCLDX 0 ns 25
Data out hold time tCLQX 50 ns 25
Clock low to next data valid (access time) tCLQV 450 ns 25
Start condition setup time tCHDL 250 ns 25
Start condition hold time tDLCL 250 ns 25
Stop condition setup time tCHDH 250 ns 25
Time between Stop condition and next Start condition tDHDL 500 ns 25
WC set up time (before the Start condition) tWLDL 0 µs WC=0 set up time to enable WRITE 25
WC hold time (after the Stop condition) tDHWH 1 µs WC=0 hold time to enable WRITE 25
Write time tW 5 ms 25
Pulse width ignored (input filter on SCL and SDA) tNS 50 ns 25

CAD (KiCad official)

  • Symbol: M24128-BFMN6TP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: m24128-bfmn6tp-etched.step / m24128-bfmn6tp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m24128-bfmn6tp.step / m24128-bfmn6tp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (46 pp, sha256 f271d50817e50b0b, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF