main
Ray Publish 0.1.0 cd2f52a

M0G3106QRHBRQ1

Texas Instruments · IC · VQFN-32(5x5)

M0G3106QRHBRQ1 from Texas Instruments, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA0 bidirectional 5V-tolerant open-drain GPIO with wake up from SHUTDOWN, muxed with UART0_TX, I2C0_SDA, TIMA0_C0, TIMA_FAL1, TIMG8_C1, FCC_IN and default BSL I2C data; needs a pullup for output high.
2 PA1 bidirectional 5V-tolerant open-drain GPIO with wake up from SHUTDOWN, muxed with UART0_RX, I2C0_SCL, TIMA0_C1, TIMA_FAL2, TIMG8_IDX, TIMG8_C0 and default BSL I2C clock; needs a pullup for output high.
3 NRST input Active-low reset input that must be pulled high to VDD for the device to start.
4 VDD power_in Power supply, 1.62V to 3.6V recommended, with 10uF capacitor to VSS.
5 VSS power_in Ground supply.
6 PA2 bidirectional Standard-drive GPIO or ROSC external resistor connection (100kΩ to VSS) for improving SYSOSC accuracy, muxed with TIMG8_C1, SPI0_CS0, TIMG7_C1, SPI1_CS0.
7 PA3 bidirectional Standard-drive GPIO or LFXIN input for the low-frequency crystal oscillator, muxed with TIMG8_C0, SPI0_CS1, UART2_CTS, TIMA0_C2, TIMG7_C0, TIMA0_C1, I2C1_SDA.
8 PA4 bidirectional Standard-drive GPIO or LFXOUT crystal output, also LFCLK_IN digital low-frequency clock input, muxed with TIMG8_C1, SPI0_POCI, UART2_RTS, TIMA0_C3, TIMG7_C1, TIMA0_C1N, I2C1_SCL.
9 PA5 bidirectional Standard-drive GPIO or HFXIN input for the high-frequency crystal oscillator, muxed with TIMG8_C0, SPI0_PICO, TIMA_FAL1, TIMG0_C0, TIMG6_C0, FCC_IN.
10 PA6 bidirectional Standard-drive GPIO or HFXOUT crystal output, also HFCLK_IN digital high-frequency clock input, muxed with TIMG8_C1, SPI0_SCK, TIMA_FAL0, TIMG0_C1, TIMG6_C1, TIMA0_C2N.
11 PA7 bidirectional Standard-drive GPIO muxed with CLK_OUT, TIMG8_C0, TIMA0_C2, TIMG8_IDX, TIMG7_C1, TIMA0_C1.
12 PA8 bidirectional Standard-drive GPIO muxed with UART1_TX, SPI0_CS0, UART0_RTS, TIMA0_C0, TIMA1_C0N.
13 PA9 bidirectional High-speed GPIO muxed with UART1_RX, SPI0_PICO, UART0_CTS, TIMA0_C1, RTC_OUT, TIMA0_C0N, TIMA1_C1N, CLK_OUT.
14 PA10 bidirectional High-drive GPIO with wake up from SHUTDOWN muxed with UART0_TX, SPI0_POCI, I2C0_SDA, TIMA1_C0, TIMG12_C0, TIMA0_C2, I2C1_SDA, CLK_OUT; default BSL UART transmit.
15 PA11 bidirectional High-drive GPIO with wake up from SHUTDOWN muxed with UART0_RX, SPI0_SCK, I2C0_SCL, TIMA1_C1, TIMA0_C2N, I2C1_SCL; default BSL UART receive.
16 PA12 bidirectional High-speed GPIO muxed with UART3_CTS, SPI0_SCK, TIMG0_C0, CAN_TX, TIMA0_C3, FCC_IN.
17 PA13 bidirectional High-speed GPIO muxed with UART3_RTS, SPI0_POCI, UART3_RX, TIMG0_C1, CAN_RX, TIMA0_C3N.
18 PA14 bidirectional High-speed GPIO with ADC0 analog input A0_12, muxed with UART0_CTS, SPI0_PICO, UART3_TX, TIMG12_C0, CLK_OUT.
19 PA15 bidirectional Standard-drive GPIO with ADC1 analog input A1_0, muxed with UART0_RTS, SPI1_CS2, I2C1_SCL, TIMA1_C0, TIMG8_IDX, TIMA1_C0N, TIMA0_C2.
20 PA16 bidirectional Standard-drive GPIO with ADC1 analog input A1_1, muxed with SPI1_POCI, I2C1_SDA, TIMA1_C1, TIMA1_C1N, TIMA0_C2N, FCC_IN.
21 PA17 bidirectional Standard GPIO with wake up from SHUTDOWN and ADC1 analog input A1_2, muxed with UART1_TX, SPI1_SCK, I2C1_SCL, TIMA0_C3, TIMG7_C0, TIMA1_C0.
22 PA18 bidirectional Standard GPIO with wake up from SHUTDOWN, ADC1 input A1_3, GPAMP_IN- and BSL_invoke, muxed with UART1_RX, SPI1_PICO, I2C1_SDA, TIMA0_C3N, TIMG7_C1, TIMA1_C1.
23 PA19 bidirectional High-speed GPIO used as SWDIO serial wire debug data input/output.
24 PA20 bidirectional Standard-drive GPIO used as SWCLK serial wire debug clock input.
25 PA21 bidirectional Standard-drive GPIO with ADC1 input A1_7 and VREF- reference ground; no injection current allowed on this pin (internal test connection); muxed with UART2_TX, TIMG8_C0, UART1_CTS, TIMA0_C0, TIMG6_C0.
26 PA22 bidirectional Standard-drive GPIO with ADC0 input A0_7 and GPAMP_OUT, muxed with UART2_RX, TIMG8_C1, UART1_RTS, TIMA0_C1, CLK_OUT, TIMA0_C0N, TIMG6_C1.
27 PA23 bidirectional Standard-drive GPIO or VREF+ voltage reference supply (external reference input or internal reference output, needs decoupling capacitor to VREF-), muxed with UART2_TX, SPI0_CS3, TIMA0_C3, TIMG0_C0, UART3_CTS, TIMG7_C0, TIMG8_C0.
28 PA24 bidirectional Standard-drive GPIO with ADC0 analog input A0_3, muxed with UART2_RX, SPI0_CS2, TIMA0_C3N, TIMG0_C1, UART3_RTS, TIMG7_C1, TIMA1_C1.
29 PA25 bidirectional Standard-drive GPIO with ADC0 analog input A0_2, muxed with UART3_RX, SPI1_CS3, TIMG12_C1, TIMA0_C3, TIMA0_C1N.
30 PA26 bidirectional Standard-drive GPIO with ADC0 input A0_1 and GPAMP_IN+, muxed with UART3_TX, SPI1_CS0, TIMG8_C0, TIMA_FAL0, CAN_TX, TIMG7_C0.
31 PA27 bidirectional Standard-drive GPIO with ADC0 analog input A0_0, muxed with RTC_OUT, SPI1_CS1, TIMG8_C1, TIMA_FAL2, CAN_RX, TIMG7_C1.
32 VCORE power_out Regulated core power supply output; connect only a 470nF (0.47uF) capacitor to VSS and apply no external voltage or load.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32(5x5)
Category
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 4.1 V At VDD pin 25
Input voltage, 5-V tolerant open-drain pins VI -0.3 5.5 V Applied to any 5-V tolerant open-drain pins 25
Input voltage, common pins VI -0.3 4.1 V Applied to any common tolerance pins; VDD + 0.3 (4.1 MAX) 25
Current into VDD pin IVDD 80 mA -40C ≤ Tj ≤ 130C 25
Current out of VSS pin IVSS 80 mA -40C ≤ Tj ≤ 130C 25
Diode current at any device pin ID -2 2 mA 25
Junction temperature TJ -40 130 °C 25
Storage temperature Tstg -40 150 °C 25
ESD HBM V(ESD) -2000 2000 V Human body model, AEC-Q100-002 25
Supply voltage VDD 1.62 3.6 V 25
Voltage on VCORE pin VCORE 1.35 V 25
Capacitor between VDD and VSS CVDD 10 uF ±20% tolerance or better 25
Capacitor between VCORE and VSS CVCORE 470 nF ±20% tolerance or better 25
Ambient temperature, Q version TA -40 125 °C 25
Max junction temperature, Q version TJ 130 °C 25
MCLK frequency, 2 flash wait states fMCLK 80 MHz 2 flash wait states 26
ULPCLK frequency fULPCLK 40 MHz 26
Junction-to-ambient thermal resistance RθJA 33.7 °C/W VQFN-32 (RHB) 26
Junction-to-case (top) thermal resistance RθJC(top) 24.5 °C/W VQFN-32 (RHB) 26
Junction-to-board thermal resistance RθJB 14 °C/W VQFN-32 (RHB) 26
Junction-to-case (bottom) thermal resistance RθJC(bot) 4.1 °C/W VQFN-32 (RHB) 26
Supply current RUN 80MHz IDDRUN 8 mA VDD=3.3V, MCLK=SYSPLL, CoreMark, flash, 80MHz, -40°C 28
Supply current STANDBY, LFXT, RTC IDDSTBY0 2 7 uA VDD=3.3V, LFCLK=LFXT, STOPCLKSTBY=0, RTC enabled, 25°C 29
Supply current SHUTDOWN IDDSHDN 40 80 nA VDD=3.3V, -40°C 29
Power-on reset voltage level, rising VPOR+ 0.95 1.3 1.59 V Rising 29
Power-on reset voltage level, falling VPOR- 0.9 1.25 1.54 V Falling 29
BOR level 0 rising VBOR0+ 1.56 1.59 1.62 V Rising 30
BOR level 0 falling VBOR0- 1.55 1.58 1.61 V Falling 30
Program and erase supply voltage VDDPGM/ERASE 1.62 3.6 V 30
LFOSC accuracy -5 5 % -40 ℃ ≤ Ta ≤ 125 ℃ 33
SYSOSC accuracy, FCL disabled 32MHz fSYSOSC -2.6 1.8 % SETUSEFCL=0, SYSOSCCFG.FREQ=00, -40 ℃ ≤ Ta ≤ 125 ℃ 33
High level input voltage, all I/O except ODIO & Reset VIH 0.7 V VDD≥1.62V; min = 0.7VDD (printed 0.7VDD), max VDD+0.3 35
Low level input voltage, all I/O except ODIO & Reset VIL -0.3 0.3 V VDD≥1.62V; max = 0.3*VDD 35
High-Z leakage current, SDIO (not PM) Ilkg 50 nA 1.62V ≤ VDD ≤ 3.6V, -40 ℃ ≤ Ta ≤ 125 ℃ 35
Input capacitance CI 5 pF 35
ADC effective number of bits ENOB 10.9 11.1 bit f_in = 10KHz, External reference 39
ADC integral linearity error EI -2 2 LSB External reference 40
ADC offset error EO -5 5 mV Internal or External reference 40
VREF output voltage VREF 1.38 1.4 1.42 V BUFCONFIG = 1 41
VREF output voltage VREF 2.46 2.5 2.54 V BUFCONFIG = 0 41
Temperature sensor temperature coefficient TSc -2.1 -1.8 -1.7 mV/℃ -40℃ ≤ Tj ≤ 130℃ 41

CAD (KiCad official)

  • Symbol: M0G3106QRHBRQ1
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: m0g3106qrhbrq1-etched.step / m0g3106qrhbrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); m0g3106qrhbrq1.step / m0g3106qrhbrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (119 pp, sha256 26a2af921de18f14, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF