main
Ray
Publish 0.1.0
e8c5970
LYT7503D-TL
POWER INTEGRATIONS · LED Drivers · SO-8
LYT7503D-TL from POWER INTEGRATIONS, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BP | power_out | BYPASS pin is the 5.25 V internal supply rail with typical voltage 5.22 V, a power-up reset threshold of 4.5 V, and an absolute maximum of 6.0 V. |
| 2 | M | bidirectional | MULTIFUNCTION pin senses output overvoltage at 120% of VOUT with a 2.4 V threshold and steady-state range of 1 V to 2.4 V when the MOSFET is off, and senses line overvoltage when the MOSFET is on. |
| 3 | FB | input | FEEDBACK pin senses MOSFET current through an external sense resistor against a 279 mV typical reference (VFB(REF)), with a normal operating range of VFB(REF) to 0 V. |
| 4 | D | passive | DRAIN pin connects to the high-voltage internal MOSFET with a breakdown voltage of 725 V and a absolute maximum DRAIN pin voltage of 725 V. |
| 5 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
| 6 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
| 7 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
| 8 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | POWER INTEGRATIONS |
| Package | SO-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Switching Frequency | fMIN | 18 | 20 | 22 | kHz | 6 | |
| Minimum Switch ON-Time | TON(MIN) | 1.012 | 1.1 | 1.25 | µs | 6 | |
| FEEDBACK Pin Reference Voltage | VFB(REF) | -285 | -279 | -273 | mV | TJ = 25 °C; See Note C | 6 |
| BYPASS Pin Voltage | VBP | 5.075 | 5.22 | 5.35 | V | 6 | |
| BYPASS Pin Shunt Voltage | VBP(SHUNT) | 5.2 | 5.39 | 5.55 | V | 6 | |
| BYPASS Pin Power-Up Reset Threshold Voltage | VBP(RESET) | 4.35 | 4.5 | 4.65 | V | 6 | |
| BYPASS Pin Charge Current | ICH1 | -10 | -4.5 | mA | VBP = 0.0 V, VDS ≥ 36 V | 6 | |
| BYPASS Pin Charge Current | ICH2 | -6 | -2 | mA | VBP = 5.0 V, VDS ≥ 36 V | 6 | |
| Current Limit for Auto-Restart | ILIMIT(AR) | 1.06 | 1.15 | 1.24 | A | di/dt = 446 mA/µs, TJ = 25 °C, LYT7503 | 7 |
| Fault Minimum Switch ON-Time | TFAULT(MIN) | 250 | 400 | ns | 7 | ||
| Input Overvoltage Threshold | IIOV | 0.9 | 1 | 1.1 | mA | TJ = 25 °C | 7 |
| MULTIFUNCTIONAL Pin Auto-Restart Threshold Voltage (Output OVP) | VOOV | 2.3 | 2.4 | 2.48 | V | TJ = 25 °C | 7 |
| MULTIFUNCTIONAL Pin Undervoltage Threshold (Output Short) | VOUV | 0.91 | 0.95 | 0.99 | V | TJ = 25 °C; See Note B | 7 |
| Junction Temperature at Fold-Back | TFB | 138 | 145 | 152 | °C | See Note B | 7 |
| ON-State Resistance | RDS(ON) | 4.5 | 5.2 | Ω | ID = 139 mA, TJ = 25 °C, LYT7503 | 7 | |
| ON-State Resistance | RDS(ON) | 6.8 | 7.8 | Ω | ID = 139 mA, TJ = 100 °C, LYT7503 | 7 | |
| Breakdown Voltage | BVDSS | 725 | V | LYT750x | 7 | ||
| DRAIN Pin Peak Current | 1.3 | A | LYT7503, allowed while Drain-Source voltage is less than 400 V | 6 | |||
| DRAIN Pin Voltage | -0.3 | 725 | V | LYT750x | 6 | ||
| BYPASS Pin Voltage | -0.3 | 6 | V | 6 | |||
| MULTIFUNCTION, FEEDBACK Pin Voltage | -0.45 | 7 | V | See Note 2 (-0.7 V FEEDBACK to SOURCE allowed if SOURCE open) | 6 | ||
| Lead Temperature | 260 | °C | 6 | ||||
| Storage Temperature | -65 | 150 | °C | 6 | |||
| Operating Junction Temperature | TJ | -40 | 150 | °C | See Note 4 | 6 | |
| Steady-state operation voltage range (MULTIFUNCTION pin, MOSFET OFF) | 1 | 2.4 | V | Mode 1: MOSFET OFF | 2 | ||
| Maximum Switch ON-Time | TON(MAX) | 10 | µs | 6 | |||
| Maximum Constant Current Zone | TCC(MAX) | 6 | ms | 6 | |||
| Forced Minimum Constant Current Zone | TCC(MIN) | 1.2 | ms | 6 | |||
| BYPASS Pin Standby Supply Current | ISBY | 180 | µA | MOSFET not switching | 6 | ||
| BYPASS Pin Supply Current MOSFET Switching | IDSS | 785 | µA | LYT7503 | 6 | ||
| Auto-Restart Off-Time | TAR(OFF)1 | 100 | ms | TJ = 25 °C | 7 | ||
| Auto-Restart Off-Time | TAR(OFF)2 | 1000 | ms | 7 | |||
| Thermal Shutdown Temperature | TSD | 160 | °C | See Note A | 7 | ||
| Thermal Shutdown Hysteresis | TSD(H) | 75 | °C | See Note A | 7 | ||
| OFF-State Leakage | IDSS1 | 55 | mA | VBP = 5.25 V, VDS = 580 V, TJ = 125 °C, LYT7503 | 7 | ||
| Thermal Resistance junction-to-ambient (SO-8) | qJA | 100 | °C/W | Soldered to 0.36 sq. inch 2 oz copper clad PCB, no external heat sink | 6 | ||
| Thermal Resistance junction-to-ambient (SO-8) | qJA | 80 | °C/W | Soldered to 1 sq. in. 2 oz copper clad PCB | 6 | ||
| Thermal Resistance junction-to-case (SO-8) | qJC | 30 | °C/W | Measured on SOURCE pin close to plastic interface | 6 |
CAD (KiCad official)
- Symbol:
LYT7503D-TL - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lyt7503d-tl-etched.step/lyt7503d-tl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lyt7503d-tl.step/lyt7503d-tl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: POWER INTEGRATIONS datasheet (12 pp, sha256
412433999c17bf48, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LYT7503D-TL
**POWER INTEGRATIONS** · LED Drivers · SO-8
LYT7503D-TL from POWER INTEGRATIONS, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BP | power_out | BYPASS pin is the 5.25 V internal supply rail with typical voltage 5.22 V, a power-up reset threshold of 4.5 V, and an absolute maximum of 6.0 V. |
| 2 | M | bidirectional | MULTIFUNCTION pin senses output overvoltage at 120% of VOUT with a 2.4 V threshold and steady-state range of 1 V to 2.4 V when the MOSFET is off, and senses line overvoltage when the MOSFET is on. |
| 3 | FB | input | FEEDBACK pin senses MOSFET current through an external sense resistor against a 279 mV typical reference (VFB(REF)), with a normal operating range of VFB(REF) to 0 V. |
| 4 | D | passive | DRAIN pin connects to the high-voltage internal MOSFET with a breakdown voltage of 725 V and a absolute maximum DRAIN pin voltage of 725 V. |
| 5 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
| 6 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
| 7 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
| 8 | S | power_in | SOURCE pin provides power and signal ground for the device and is internally tied to the MOSFET source; it also acts as an EMI shield. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | POWER INTEGRATIONS |
| Package | SO-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Switching Frequency | fMIN | 18 | 20 | 22 | kHz | | 6 |
| Minimum Switch ON-Time | TON(MIN) | 1.012 | 1.1 | 1.25 | µs | | 6 |
| FEEDBACK Pin Reference Voltage | VFB(REF) | -285 | -279 | -273 | mV | TJ = 25 °C; See Note C | 6 |
| BYPASS Pin Voltage | VBP | 5.075 | 5.22 | 5.35 | V | | 6 |
| BYPASS Pin Shunt Voltage | VBP(SHUNT) | 5.2 | 5.39 | 5.55 | V | | 6 |
| BYPASS Pin Power-Up Reset Threshold Voltage | VBP(RESET) | 4.35 | 4.5 | 4.65 | V | | 6 |
| BYPASS Pin Charge Current | ICH1 | -10 | | -4.5 | mA | VBP = 0.0 V, VDS ≥ 36 V | 6 |
| BYPASS Pin Charge Current | ICH2 | -6 | | -2 | mA | VBP = 5.0 V, VDS ≥ 36 V | 6 |
| Current Limit for Auto-Restart | ILIMIT(AR) | 1.06 | 1.15 | 1.24 | A | di/dt = 446 mA/µs, TJ = 25 °C, LYT7503 | 7 |
| Fault Minimum Switch ON-Time | TFAULT(MIN) | 250 | | 400 | ns | | 7 |
| Input Overvoltage Threshold | IIOV | 0.9 | 1 | 1.1 | mA | TJ = 25 °C | 7 |
| MULTIFUNCTIONAL Pin Auto-Restart Threshold Voltage (Output OVP) | VOOV | 2.3 | 2.4 | 2.48 | V | TJ = 25 °C | 7 |
| MULTIFUNCTIONAL Pin Undervoltage Threshold (Output Short) | VOUV | 0.91 | 0.95 | 0.99 | V | TJ = 25 °C; See Note B | 7 |
| Junction Temperature at Fold-Back | TFB | 138 | 145 | 152 | °C | See Note B | 7 |
| ON-State Resistance | RDS(ON) | 4.5 | | 5.2 | Ω | ID = 139 mA, TJ = 25 °C, LYT7503 | 7 |
| ON-State Resistance | RDS(ON) | 6.8 | | 7.8 | Ω | ID = 139 mA, TJ = 100 °C, LYT7503 | 7 |
| Breakdown Voltage | BVDSS | | 725 | | V | LYT750x | 7 |
| DRAIN Pin Peak Current | | | | 1.3 | A | LYT7503, allowed while Drain-Source voltage is less than 400 V | 6 |
| DRAIN Pin Voltage | | -0.3 | | 725 | V | LYT750x | 6 |
| BYPASS Pin Voltage | | -0.3 | | 6 | V | | 6 |
| MULTIFUNCTION, FEEDBACK Pin Voltage | | -0.45 | | 7 | V | See Note 2 (-0.7 V FEEDBACK to SOURCE allowed if SOURCE open) | 6 |
| Lead Temperature | | | | 260 | °C | | 6 |
| Storage Temperature | | -65 | | 150 | °C | | 6 |
| Operating Junction Temperature | TJ | -40 | | 150 | °C | See Note 4 | 6 |
| Steady-state operation voltage range (MULTIFUNCTION pin, MOSFET OFF) | | 1 | | 2.4 | V | Mode 1: MOSFET OFF | 2 |
| Maximum Switch ON-Time | TON(MAX) | | 10 | | µs | | 6 |
| Maximum Constant Current Zone | TCC(MAX) | | 6 | | ms | | 6 |
| Forced Minimum Constant Current Zone | TCC(MIN) | | 1.2 | | ms | | 6 |
| BYPASS Pin Standby Supply Current | ISBY | | 180 | | µA | MOSFET not switching | 6 |
| BYPASS Pin Supply Current MOSFET Switching | IDSS | | 785 | | µA | LYT7503 | 6 |
| Auto-Restart Off-Time | TAR(OFF)1 | | 100 | | ms | TJ = 25 °C | 7 |
| Auto-Restart Off-Time | TAR(OFF)2 | | 1000 | | ms | | 7 |
| Thermal Shutdown Temperature | TSD | | 160 | | °C | See Note A | 7 |
| Thermal Shutdown Hysteresis | TSD(H) | | 75 | | °C | See Note A | 7 |
| OFF-State Leakage | IDSS1 | | 55 | | mA | VBP = 5.25 V, VDS = 580 V, TJ = 125 °C, LYT7503 | 7 |
| Thermal Resistance junction-to-ambient (SO-8) | qJA | | 100 | | °C/W | Soldered to 0.36 sq. inch 2 oz copper clad PCB, no external heat sink | 6 |
| Thermal Resistance junction-to-ambient (SO-8) | qJA | | 80 | | °C/W | Soldered to 1 sq. in. 2 oz copper clad PCB | 6 |
| Thermal Resistance junction-to-case (SO-8) | qJC | | 30 | | °C/W | Measured on SOURCE pin close to plastic interface | 6 |
## CAD (KiCad official)
- Symbol: `LYT7503D-TL`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lyt7503d-tl-etched.step` / `lyt7503d-tl-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lyt7503d-tl.step` / `lyt7503d-tl.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [POWER INTEGRATIONS datasheet](docs/lyt7503d-tl-datasheet.pdf) (12 pp, sha256 `412433999c17bf48`, retrieved 2026-10-30, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lyt7503d-tl-datasheet.pdf)