component
LY8212SLT
Public Made by Adomby adom
Lyontek Inc Audio Power OpAmps, SOP-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLY8212SLT
Lyontek Inc · Audio Power OpAmps · SOP-16
LY8212SLT from Lyontek Inc, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vo-(L) | output | Negative BTL output of the left channel. Class-D PWM output; connects directly to one terminal of the left speaker (no output filter required for inductive loads). |
| 2 | GND | power_in | Power ground. One of three ground pins (2, 9, 15) that carry the Class-D output-stage return current; keep the ground trace wide and short to the decoupling capacitors. |
| 3 | Vo+(L) | output | Positive BTL output of the left channel. Class-D PWM output; connects to the other terminal of the left speaker. |
| 4 | VDD | power_in | Power supply for the left and right output stages. Operating range 2.2V-5.5V (6.0V absolute max). Decouple with a 10µF bulk capacitor and a 0.1µF ceramic close to the pin; shared with pin 13. |
| 5 | SDB | input | Shutdown control (active-low). Drive low (≤0.4V) to place the device in shutdown (ISD ≈ 0.1µA); drive high (≥1.2V) for normal operation. Datasheet also labels this pin 'SHUTDOWN' in the pin-configuration drawing. |
| 6 | AGND | power_in | Analog ground for both left and right input/preamp stages. Must be tied to the main ground plane. |
| 7 | INL | input | Left-channel single-ended audio input. AC-couple through a series input capacitor and input resistor Ri (typ. 150kΩ, 0.22µF for fc ≈ 4.8Hz). Ri sets the pre-amplifier gain per Rf/Ri. |
| 8 | BYPASS | passive | Internal mid-supply reference bypass. Connect a ceramic bypass capacitor (typ. 2.2µF) to ground; this capacitor sets the start-up ramp time (≈215-265ms with 2.2µF). |
| 9 | GND | power_in | Power ground. One of three ground pins (2, 9, 15) that carry the Class-D output-stage return current. |
| 10 | INR | input | Right-channel single-ended audio input. AC-couple through a series input capacitor and input resistor Ri (typ. 150kΩ, 0.22µF). |
| 11 | AVDD | power_in | Analog power supply for the left and right pre-amp/analog sections. Typically tied to the same rail as VDD (2.2V-5.5V) with local 0.1µF decoupling to AGND. |
| 12 | Radio Enhance | input | Radio-enhance mode control (active-high). Drive high to enable the radio-enhance function for improved performance with weak radio signals; drive low for normal (higher-efficiency) mode. Recommended to keep low when the radio function is not needed. |
| 13 | VDD | power_in | Power supply for the left and right output stages (shared with pin 4). Operating range 2.2V-5.5V. Decouple locally with 0.1µF ceramic. |
| 14 | Vo+(R) | output | Positive BTL output of the right channel. Class-D PWM output; connects directly to one terminal of the right speaker. |
| 15 | GND | power_in | Power ground. One of three ground pins (2, 9, 15) that carry the Class-D output-stage return current. |
| 16 | Vo-(R) | output | Negative BTL output of the right channel. Class-D PWM output; connects to the other terminal of the right speaker. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lyontek Inc |
| Package | SOP-16 |
| Category | Op-amp/Cmp |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
LY8212SLT
CAD (KiCad official)
- Symbol:
LY8212SLT - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
ly8212slt-etched.step/ly8212slt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ly8212slt.step/ly8212slt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lyontek Inc datasheet (9 pp, sha256
b1be743829a791e2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).