LW5233N23C

{
  "slug": "lw5233n23c",
  "version": "0.1.0",
  "type": "component",
  "description": "Lewa Micro Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lw5233n23c",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lw5233n23c.kicad_sym",
    "lw5233n23c.kicad_mod",
    "lw5233n23c.glb",
    "lw5233n23c.step",
    "lw5233n23c.lbr",
    "docs/hero.png",
    "docs/lw5233n23c-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lw5233n23c-hero.glb",
    "lw5233n23c-hero.overlay.json",
    "lw5233n23c-etched.glb"
  ],
  "component": {
    "mpn": "LW5233N23C",
    "manufacturer": "Lewa Micro",
    "package": "SOT-23",
    "pin_count": 3,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8775070477360746496",
    "parts": {
      "symbol": "lw5233n23c.kicad_sym",
      "footprint": "lw5233n23c.kicad_mod",
      "model_3d": "lw5233n23c-hero.glb",
      "model_3d_plain": "lw5233n23c-etched.glb",
      "model_3d_step": "lw5233n23c-etched.step",
      "model_3d_step_plain": "lw5233n23c.step",
      "lbr": "lw5233n23c.lbr"
    },
    "distributor_links": {
      "lcsc": "C20630441"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T19:33:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the regulator, and the GND node that the datasheet says the PCB ground planes for VIN and VOUT should connect to."
      },
      {
        "number": "2",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output pin (1.2 V to 5.0 V, 3.3 V for this part); use a low-ESR capacitor of at least 1 µF, placed no more than 0.5 inch from the pin, and an internal pulldown discharges OUT when VEN is below VEN(LOW)."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin, operating range 1.5 V to 6.0 V; place the recommended input capacitor as close to the device as possible for best transient response."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOT23 column is merged in the source pin table header as 'SOT23/ SOT23-3L', so SOT23 and SOT23-3; The EN and NC pins appear only in the SOT23-5L and DFN1x1-4L columns and are not present on the 3-pi"
        ],
        "pages_sent": 22,
        "cost_usd": 0.0749,
        "at": "2026-10-17T19:32:47"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8775070477360746496",
        "pages": 22,
        "sha256": "554585e66fced619",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lw5233n23c.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3.0,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd5d1711204e1d8d26cd11490923bd84340820baa69538c385a4300ec2539bc0",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lw5233n23c-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3.0,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "95077628853f8e6d9a4c744b163059c120dc2946e8049037aec96ace21deaa4f",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}