Generated by kicad-footprint-generator · KiCad file format 20260206
LW5233A23E
Lewa Micro · Linear Voltage Regulators (LDO) · SOT-23-5L
LW5233A23E from Lewa Micro, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input pin with a supply range of 1.5 V to 6.0 V, which should have the recommended or larger ceramic input capacitor from IN to ground placed as close to the device as possible for best transient response. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin rated 0 to 6.0 V; drive above VEN(HI) to turn the regulator on and below VEN(LO) to put it into shutdown. |
| 4 | NC | unconnected | No internal connection; the datasheet says to ground this pin for better thermal performance. |
| 5 | VOUT | power_out | Regulated output pin (1.2 V to 5.0 V) that needs a low-ESR capacitor, with an internal pulldown that discharges OUT when the regulator is in shutdown. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lewa Micro |
| Package | SOT-23-5L |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Accuracy | VOUT | -1.5 | 1.5 | % | IOUT= 1mA | 5 | |
| Current Limit | ILIM | 515 | 700 | mA | 5 | ||
| Quiescent Current | IQ | 40 | 60 | μA | VIN= VEN=VOUT+1V, No Load | 5 | |
| Shutdown Current | ISHD | 0.1 | μA | VIN=6.0, VEN=0V | 5 | ||
| Dropout Voltage at 100mA | VDROP | 50 | mV | IOUT=100mA, VOUT=3.3V | 5 | ||
| Dropout Voltage at 500mA | VDROP | 250 | mV | IOUT=500mA, VOUT=3.3V | 5 | ||
| Line Regulation | ΔVOUT/(ΔVIN*VOUT(NOM)) | 0.1 | 0.25 | %/V | VIN= VOUT +1V to 6V, IOUT=1mA | 5 | |
| Load Regulation | ΔVOUT | 20 | 50 | mV | 1mA≤IOUT≤500mA | 5 | |
| Short Current | ISHORT | 80 | mA | VOUT=0V | 5 | ||
| EN High Voltage | VENH | 1.5 | V | VIN=1.5V to 6.0V, IOUT=1mA | 5 | ||
| EN Low Voltage | VENL | 0.5 | V | 5 | |||
| Startup Time | TSTR | 25 | μs | From VEN 'L'→'H' to 95%*VOUT, COUT=1uF, No Load | 5 | ||
| Power Supply Rejection Ratio at 217Hz | PSRR | 85 | dB | VIN=4.3V, VOUT=3.3V, CIN=None, VPP=0.5V, IOUT=10mA, f=217Hz | 5 | ||
| Power Supply Rejection Ratio at 1kHz | PSRR | 95 | dB | VIN=4.3V, VOUT=3.3V, CIN=None, VPP=0.5V, IOUT=10mA, f=1KHz | 5 | ||
| Power Supply Rejection Ratio at 10kHz | PSRR | 75 | dB | VIN=4.3V, VOUT=3.3V, CIN=None, VPP=0.5V, IOUT=10mA, f=10KHz | 5 | ||
| Power Supply Rejection Ratio at 100kHz | PSRR | 55 | dB | VIN=4.3V, VOUT=3.3V, CIN=None, VPP=0.5V, IOUT=10mA, f=100KHz | 5 | ||
| Thermal Shutdown Temperature | TSD | 160 | ℃ | Temperature rising | 5 | ||
| TSD Hysteresis | △TSD | 20 | ℃ | Temperature falling | 5 | ||
| Output Discharge Resistance | RDSCHG | 150 | Ω | VIN=6V, VEN=0V | 5 | ||
| Input Voltage (electrical table) | VIN | 1.5 | 6 | V | 5 | ||
| Supply Voltage (recommended) | VIN | 1.5 | 6 | V | 4 | ||
| EN Pin Voltage (recommended) | VEN | 0 | 6 | V | 4 | ||
| VOUT Pin Voltage (recommended) | VOUT | 1.2 | 5 | V | 4 | ||
| Output Current (recommended) | IOUT | 0 | 500 | mA | 4 | ||
| Junction Temperature Range (recommended) | TJ | -40 | 125 | ℃ | 4 | ||
| VIN Supply Voltage (absolute maximum) | VIN | -0.3 | 7 | V | TA=25℃ | 4 | |
| EN Pin Voltage (absolute maximum) | VEN | -0.3 | 7 | V | TA=25℃ | 4 | |
| VOUT Pin Voltage (absolute maximum) | VOUT | -0.3 | V | TA=25℃; maximum is (VIN+0.3) V as printed | 4 | ||
| ESD Susceptibility, HBM | V(ESD) | -4000 | 4000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Junction Temperature Range (absolute maximum) | TJ | -40 | 150 | ℃ | TA=25℃ | 4 | |
| Storage Temperature Range | TSTG | -40 | 150 | ℃ | 4 | ||
| Lead Temperature (Soldering) | TSOLDER | 260 | ℃ | 10s | 4 | ||
| Junction-to-ambient Thermal Resistance, SOT23-5L | RθJA | 285 | ℃/W | SOT23-5L; device mounted on FR-4 PCB per JESD51-3 | 4 |
CAD (KiCad official)
- Symbol:
LW5233A23E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
lw5233a23e-etched.step/lw5233a23e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lw5233a23e.step/lw5233a23e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lewa Micro datasheet (22 pp, sha256
554585e66fced619, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).