component
LW5212N11E
Public Made by Adomby adom
Lewa Micro Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-4L(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLW5212N11E
Lewa Micro · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-4L(1x1)
LW5212N11E from Lewa Micro, in a DFN-4L(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output; the recommended VOUT pin voltage range is 0.8V to 5.0V, and this LW5212N11E is the 1.2V option, with output current rated 0 to 500mA. |
| 2 | GND | power_in | Ground reference pin, listed on the datasheet as '2,E-PAD' so the exposed pad is also GND; the layout guidance is to connect separate VIN and VOUT ground planes only at this GND pin. |
| 3 | EN | input | Chip enable input; the datasheet gives VENH min 1.5V and VENL max 0.5V, with the EN pin voltage recommended range 0 to 6.0V. |
| 4 | VIN | power_in | Power supply input with recommended range 1.5V to 6.0V and absolute maximum rating -0.3V to 7.0V. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lewa Micro |
| Package | DFN-4L(1x1) |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LW5212N11E - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4L(1x1) (KiCad packages3D, STEP)
- 3D model files:
lw5212n11e-etched.step/lw5212n11e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lw5212n11e.step/lw5212n11e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lewa Micro datasheet (18 pp, sha256
d70e59e081543d55, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).