main
Ray
Publish 0.1.0
958214e
LTV-341P-TA1-H
Lite-On · Gate Drive Optocoupler · SO-6
LTV-341P-TA1-H from Lite-On, in a SO-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | input | LED anode input; recommended LED on-current is 7 to 16 mA (IFL(ON)), with absolute maximum average forward current of 25 mA. |
| 3 | Cathode | input | LED cathode input; LED off-state input voltage VF(OFF) recommended -3.0 to 0.8 V and reverse voltage limited to 5 V. |
| 4 | GND | power_in | Output-side ground (VEE); a 0.1 µF ceramic bypass capacitor must be connected between pin 4 and pin 6, placed within 1 cm of each pin. |
| 5 | Vo | output | Rail-to-rail gate-drive output with 3.0 A minimum and 4.0 A maximum peak output current, absolute maximum peak output current 3.0 A (IOH/IOL). |
| 6 | Vcc | power_in | Positive output supply with recommended range 15 to 30 V (absolute maximum VCC-VEE 35 V) and UVLO with hysteresis; needs a 0.1 µF bypass capacitor to pin 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lite-On |
| Package | SO-6 |
| Category | Optoisolators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | Tstg | -55 | 125 | oC | 6 | ||
| Operating Temperature | Topr | -40 | 105 | oC | 6 | ||
| Output IC Junction Temperature | TJ | 125 | oC | 6 | |||
| Total Output Supply Voltage (VCC-VEE) | VCC-VEE | 0 | 35 | V | 6 | ||
| Average Forward Input Current | IF | 25 | mA | 6 | |||
| Reverse Input Voltage | VR | 5 | V | 6 | |||
| Peak Transient Input Current | IF(TRAN) | 1 | A | Pulse width (PW) ≤ 1 μs, 300 pps | 6 | ||
| High Peak Output Current | IOH(PEAK) | 3 | A | Exponential waveform. Pulse width ≤ 0.3 μs, f ≤ 15 kHz | 6 | ||
| Low Peak Output Current | IOL(PEAK) | 3 | A | Exponential waveform. Pulse width ≤ 0.3 μs, f ≤ 15 kHz | 6 | ||
| Input Current (Rise/Fall Time) | tr(IN)/tf(IN) | 500 | ns | Rise and fall time of input on-current | 6 | ||
| Power Dissipation | PI | 45 | mW | 6 | |||
| Output IC Power Dissipation | PO | 700 | mW | 6 | |||
| Total Power Dissipation | PT | 745 | mW | 6 | |||
| Lead Solder Temperature | Tsol | 260 | oC | 6 | |||
| Operating Temperature | TA | -40 | 105 | oC | 6 | ||
| Supply Voltage | VCC | 15 | 30 | V | 6 | ||
| Input Current (ON) | IFL(ON) | 7 | 16 | mA | 6 | ||
| Input Voltage (OFF) | VF(OFF) | -3 | 0.8 | V | 6 | ||
| Input Forward Voltage | VF | 1.2 | 1.37 | 1.8 | V | IF = 10mA | 7 |
| Input Reverse Voltage | BVR | 5 | V | IR = 10μA | 7 | ||
| Input Threshold Current (Low to High) | IFLH | 1.8 | 5 | mA | VCC = 30 V, VO > 5V | 7 | |
| Input Threshold Voltage (High to Low) | VFHL | 0.8 | V | VCC = 30 V, VO < 5V | 7 | ||
| High Level Supply Current | ICCH | 2.4 | 3.5 | mA | IF = 10 mA, VCC = 30V, VO = Open | 7 | |
| Low Level Supply Current | ICCL | 2.5 | 3.5 | mA | IF = 0 mA, VCC = 30V, VO = Open | 7 | |
| High level output current | IOH | -1 | A | VO = (VCC, 1.5 V); Note 1: maximum pulse width = 50 μs | 7 | ||
| High level output current | IOH | -3 | A | VCC - VO ≤ 15 V; Note 2: maximum pulse width = 10 μs | 7 | ||
| Low level output current | IOL | 1 | A | VO = (VEE + 1.5 V) | 7 | ||
| Low level output current | IOL | 3 | A | VCC, VEE ≤ 15 V | 7 | ||
| UVLO Threshold (turn-on) | VUVLO+ | 11 | 12.7 | 13.5 | V | VO > 5V, IF = 10 mA | 7 |
| UVLO Threshold (turn-off) | VUVLO- | 9.5 | 11.2 | 12 | V | VO < 5V, IF = 10 mA | 7 |
| Propagation Delay Time to High Output Level | tPLH | 50 | 130 | 200 | ns | Rg = 10Ω, Cg = 25nF, f = 10 kHz, Duty Cycle = 50%; IF = 7 to 16 mA, VCC = 15 to 30V; VEE = ground | 8 |
| Propagation Delay Time to Low Output Level | tPHL | 50 | 130 | 200 | ns | Rg = 10Ω, Cg = 25nF, f = 10 kHz, Duty Cycle = 50%; IF = 7 to 16 mA, VCC = 15 to 30V; VEE = ground | 8 |
| Pulse Width Distortion | PWD | 5 | 70 | ns | 8 | ||
| Propagation delay difference between any two parts or channels | PDD | -100 | 100 | ns | 8 | ||
| Output Rise Time (10 to 90%) | Tr | 35 | ns | 8 | |||
| Output Fall Time (90 to 10%) | Tf | 35 | ns | 8 | |||
| Common mode transient immunity at high level output | /CMH/ | 35 | 50 | kV/μs | TA = 25°C, IF = 10 to 16 mA, VCM = 1500 V, VCC = 30 V | 8 | |
| Common mode transient immunity at low level output | /CML/ | 35 | 50 | kV/μs | TA = 25°C, VF = 0 V, VCM = 1500 V, VCC = 30 V | 8 | |
| Withstand Insulation Test Voltage | VISO | 5000 | V | RH ≤ 40%-60%, t = 1min, TA = 25 oC | 9 | ||
| Input-Output Capacitance | CI-O | 0.92 | pF | f = 1MHz, TA = 25 oC | 9 | ||
| Maximum Working Insulation Voltage (LTV-341P) | VIORM | 891 | Vpeak | 5 | |||
| Highest Allowable Overvoltage (LTV-341P) | VIOTM | 6000 | Vpeak | Transient overvoltage tini = 60 sec | 5 | ||
| Safety-limiting Case Temperature | TS | 175 | oC | Safety-limiting value, maximum allowed in event of failure | 5 | ||
| Safety-limiting Input Current | IS, INPUT | 150 | mA | Safety-limiting value, maximum allowed in event of failure | 5 | ||
| Safety-limiting Output Power | PS, OUTPUT | 600 | mW | Safety-limiting value, maximum allowed in event of failure | 5 | ||
| Input Forward Voltage Temperature Coefficient | ΔVF/ ΔT | -1.237 | mV/OC | IF = 10mA | 7 | ||
| Input Capacitance | CIN | 33 | pF | f = 1 MHz, VF = 0 V | 7 | ||
| UVLO Hysteresis | UVLOHYS | 1.5 | V | 7 |
CAD (KiCad official)
- Symbol:
LTV-341P-TA1-H - Footprint:
Package_SO:SO-6_4.4x3.6mm_P1.27mm - 3D model: SO-6 (KiCad packages3D, STEP)
- 3D model files:
ltv-341p-ta1-h-etched.step/ltv-341p-ta1-h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltv-341p-ta1-h.step/ltv-341p-ta1-h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lite-On datasheet (16 pp, sha256
2c9155360450fe3d, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTV-341P-TA1-H
**Lite-On** · Gate Drive Optocoupler · SO-6
LTV-341P-TA1-H from Lite-On, in a SO-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode | input | LED anode input; recommended LED on-current is 7 to 16 mA (IFL(ON)), with absolute maximum average forward current of 25 mA. |
| 3 | Cathode | input | LED cathode input; LED off-state input voltage VF(OFF) recommended -3.0 to 0.8 V and reverse voltage limited to 5 V. |
| 4 | GND | power_in | Output-side ground (VEE); a 0.1 µF ceramic bypass capacitor must be connected between pin 4 and pin 6, placed within 1 cm of each pin. |
| 5 | Vo | output | Rail-to-rail gate-drive output with 3.0 A minimum and 4.0 A maximum peak output current, absolute maximum peak output current 3.0 A (IOH/IOL). |
| 6 | Vcc | power_in | Positive output supply with recommended range 15 to 30 V (absolute maximum VCC-VEE 35 V) and UVLO with hysteresis; needs a 0.1 µF bypass capacitor to pin 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lite-On |
| Package | SO-6 |
| Category | Optoisolators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | Tstg | -55 | | 125 | oC | | 6 |
| Operating Temperature | Topr | -40 | | 105 | oC | | 6 |
| Output IC Junction Temperature | TJ | | | 125 | oC | | 6 |
| Total Output Supply Voltage (VCC-VEE) | VCC-VEE | 0 | | 35 | V | | 6 |
| Average Forward Input Current | IF | | | 25 | mA | | 6 |
| Reverse Input Voltage | VR | | | 5 | V | | 6 |
| Peak Transient Input Current | IF(TRAN) | | | 1 | A | Pulse width (PW) ≤ 1 μs, 300 pps | 6 |
| High Peak Output Current | IOH(PEAK) | | | 3 | A | Exponential waveform. Pulse width ≤ 0.3 μs, f ≤ 15 kHz | 6 |
| Low Peak Output Current | IOL(PEAK) | | | 3 | A | Exponential waveform. Pulse width ≤ 0.3 μs, f ≤ 15 kHz | 6 |
| Input Current (Rise/Fall Time) | tr(IN)/tf(IN) | | | 500 | ns | Rise and fall time of input on-current | 6 |
| Power Dissipation | PI | | | 45 | mW | | 6 |
| Output IC Power Dissipation | PO | | | 700 | mW | | 6 |
| Total Power Dissipation | PT | | | 745 | mW | | 6 |
| Lead Solder Temperature | Tsol | | | 260 | oC | | 6 |
| Operating Temperature | TA | -40 | | 105 | oC | | 6 |
| Supply Voltage | VCC | 15 | | 30 | V | | 6 |
| Input Current (ON) | IFL(ON) | 7 | | 16 | mA | | 6 |
| Input Voltage (OFF) | VF(OFF) | -3 | | 0.8 | V | | 6 |
| Input Forward Voltage | VF | 1.2 | 1.37 | 1.8 | V | IF = 10mA | 7 |
| Input Reverse Voltage | BVR | 5 | | | V | IR = 10μA | 7 |
| Input Threshold Current (Low to High) | IFLH | | 1.8 | 5 | mA | VCC = 30 V, VO > 5V | 7 |
| Input Threshold Voltage (High to Low) | VFHL | 0.8 | | | V | VCC = 30 V, VO < 5V | 7 |
| High Level Supply Current | ICCH | | 2.4 | 3.5 | mA | IF = 10 mA, VCC = 30V, VO = Open | 7 |
| Low Level Supply Current | ICCL | | 2.5 | 3.5 | mA | IF = 0 mA, VCC = 30V, VO = Open | 7 |
| High level output current | IOH | -1 | | | A | VO = (VCC, 1.5 V); Note 1: maximum pulse width = 50 μs | 7 |
| High level output current | IOH | -3 | | | A | VCC - VO ≤ 15 V; Note 2: maximum pulse width = 10 μs | 7 |
| Low level output current | IOL | 1 | | | A | VO = (VEE + 1.5 V) | 7 |
| Low level output current | IOL | 3 | | | A | VCC, VEE ≤ 15 V | 7 |
| UVLO Threshold (turn-on) | VUVLO+ | 11 | 12.7 | 13.5 | V | VO > 5V, IF = 10 mA | 7 |
| UVLO Threshold (turn-off) | VUVLO- | 9.5 | 11.2 | 12 | V | VO < 5V, IF = 10 mA | 7 |
| Propagation Delay Time to High Output Level | tPLH | 50 | 130 | 200 | ns | Rg = 10Ω, Cg = 25nF, f = 10 kHz, Duty Cycle = 50%; IF = 7 to 16 mA, VCC = 15 to 30V; VEE = ground | 8 |
| Propagation Delay Time to Low Output Level | tPHL | 50 | 130 | 200 | ns | Rg = 10Ω, Cg = 25nF, f = 10 kHz, Duty Cycle = 50%; IF = 7 to 16 mA, VCC = 15 to 30V; VEE = ground | 8 |
| Pulse Width Distortion | PWD | | 5 | 70 | ns | | 8 |
| Propagation delay difference between any two parts or channels | PDD | -100 | | 100 | ns | | 8 |
| Output Rise Time (10 to 90%) | Tr | | 35 | | ns | | 8 |
| Output Fall Time (90 to 10%) | Tf | | 35 | | ns | | 8 |
| Common mode transient immunity at high level output | /CMH/ | 35 | 50 | | kV/μs | TA = 25°C, IF = 10 to 16 mA, VCM = 1500 V, VCC = 30 V | 8 |
| Common mode transient immunity at low level output | /CML/ | 35 | 50 | | kV/μs | TA = 25°C, VF = 0 V, VCM = 1500 V, VCC = 30 V | 8 |
| Withstand Insulation Test Voltage | VISO | 5000 | | | V | RH ≤ 40%-60%, t = 1min, TA = 25 oC | 9 |
| Input-Output Capacitance | CI-O | | 0.92 | | pF | f = 1MHz, TA = 25 oC | 9 |
| Maximum Working Insulation Voltage (LTV-341P) | VIORM | | | 891 | Vpeak | | 5 |
| Highest Allowable Overvoltage (LTV-341P) | VIOTM | | | 6000 | Vpeak | Transient overvoltage tini = 60 sec | 5 |
| Safety-limiting Case Temperature | TS | | | 175 | oC | Safety-limiting value, maximum allowed in event of failure | 5 |
| Safety-limiting Input Current | IS, INPUT | | | 150 | mA | Safety-limiting value, maximum allowed in event of failure | 5 |
| Safety-limiting Output Power | PS, OUTPUT | | | 600 | mW | Safety-limiting value, maximum allowed in event of failure | 5 |
| Input Forward Voltage Temperature Coefficient | ΔVF/ ΔT | | -1.237 | | mV/OC | IF = 10mA | 7 |
| Input Capacitance | CIN | | 33 | | pF | f = 1 MHz, VF = 0 V | 7 |
| UVLO Hysteresis | UVLOHYS | | 1.5 | | V | | 7 |
## CAD (KiCad official)
- Symbol: `LTV-341P-TA1-H`
- Footprint: `Package_SO:SO-6_4.4x3.6mm_P1.27mm`
- 3D model: SO-6 (KiCad packages3D, STEP)
- 3D model files: `ltv-341p-ta1-h-etched.step` / `ltv-341p-ta1-h-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltv-341p-ta1-h.step` / `ltv-341p-ta1-h.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Lite-On datasheet](docs/ltv-341p-ta1-h-datasheet.pdf) (16 pp, sha256 `2c9155360450fe3d`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltv-341p-ta1-h-datasheet.pdf)