main
Ray
ltv-0601: laser-etched CAD + chip hero (factory 2.0.0 backfill)
2fb68c9
LTV-0601
Lite On · Logic Output Optoisolators · SOP-8
LTV-0601 from Lite On, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to a convenient net; not electrically connected to the die. |
| 2 | ANODE | input | Anode of the input AlGaAs LED. Drive through a current-limit resistor; absolute maximum forward current I_F = 20 mA, reverse voltage V_R = 5 V, LED power dissipation 40 mW. |
| 3 | CATHODE | input | Cathode of the input AlGaAs LED. Typically returned to the input-side ground reference. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to a convenient net; not electrically connected to the die. |
| 5 | GND | power_in | Output-side ground reference. A 0.1 µF bypass capacitor must be connected between Pin 8 (Vcc) and Pin 5 (GND). |
| 6 | Vo | output | Open-collector, Schottky-clamped transistor output. Pulls low when the LED is ON and Enable is high; otherwise high-impedance (requires external pull-up to Vcc). Absolute maximum I_O = 50 mA, V_O = 7 V, P_o = 85 mW. |
| 7 | VE | input | Enable / strobe input, LVTTL/LVCMOS compatible. Logic high enables normal detector operation; logic low forces the output high (disables the detector). May be left NC - output then follows the LED. Absolute maximum V_E = Vcc+0.5 V, I_E = 5 mA. |
| 8 | Vcc | power_in | Output-side supply, 3.3 V or 5 V nominal (absolute maximum 7 V). Requires a 0.1 µF bypass capacitor to Pin 5 (GND) placed close to the package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lite On |
| Package | SOP-8 |
| Category | Optoisolators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LTV-0601
CAD (KiCad official)
- Symbol:
LTV-0601 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltv-0601-etched.step/ltv-0601-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltv-0601.step/ltv-0601.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lite On datasheet (19 pp, sha256
bc3f92bce974ad73, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTV-0601
**Lite On** · Logic Output Optoisolators · SOP-8
LTV-0601 from Lite On, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. Leave floating or tie to a convenient net; not electrically connected to the die. |
| 2 | ANODE | input | Anode of the input AlGaAs LED. Drive through a current-limit resistor; absolute maximum forward current I_F = 20 mA, reverse voltage V_R = 5 V, LED power dissipation 40 mW. |
| 3 | CATHODE | input | Cathode of the input AlGaAs LED. Typically returned to the input-side ground reference. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to a convenient net; not electrically connected to the die. |
| 5 | GND | power_in | Output-side ground reference. A 0.1 µF bypass capacitor must be connected between Pin 8 (Vcc) and Pin 5 (GND). |
| 6 | Vo | output | Open-collector, Schottky-clamped transistor output. Pulls low when the LED is ON and Enable is high; otherwise high-impedance (requires external pull-up to Vcc). Absolute maximum I_O = 50 mA, V_O = 7 V, P_o = 85 mW. |
| 7 | VE | input | Enable / strobe input, LVTTL/LVCMOS compatible. Logic high enables normal detector operation; logic low forces the output high (disables the detector). May be left NC - output then follows the LED. Absolute maximum V_E = Vcc+0.5 V, I_E = 5 mA. |
| 8 | Vcc | power_in | Output-side supply, 3.3 V or 5 V nominal (absolute maximum 7 V). Requires a 0.1 µF bypass capacitor to Pin 5 (GND) placed close to the package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lite On |
| Package | SOP-8 |
| Category | Optoisolators |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LTV-0601`
## CAD (KiCad official)
- Symbol: `LTV-0601`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `ltv-0601-etched.step` / `ltv-0601-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltv-0601.step` / `ltv-0601.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Lite On datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586197058017091584) (19 pp, sha256 `bc3f92bce974ad73`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltv-0601-datasheet.pdf)