main
Ray lth7: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1f6fab4
{
  "schema_version": 1,
  "type": "component",
  "slug": "lth7",
  "title": "LTH7",
  "brief": "TECH PUBLIC Battery Management, SOT-23-5L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "lth7"
  ],
  "component": {
    "mpn": "LTH7",
    "manufacturer": "TECH PUBLIC",
    "package": "SOT-23-5L",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904823385059328",
    "parts": {
      "symbol": "lth7.kicad_sym",
      "footprint": "lth7.kicad_mod",
      "model_3d": "lth7-etched.glb",
      "model_3d_plain": "lth7.glb",
      "model_3d_step": "lth7-etched.step",
      "model_3d_step_plain": "lth7.step",
      "lbr": "lth7.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output. Pulled low by an internal N-channel MOSFET during charging and goes high-impedance when charging completes or when the low-battery lockout condition is detected. With a 1 uF cap from BAT to GND, the pin also indicates battery presence (LED flashes rapidly when no battery is attached)."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "3",
        "name": "BAT",
        "type": "power_out",
        "description": "Charge current output to the Li-ion battery. Regulates the float voltage to 4.2 V and delivers programmed charge current (up to ~500 mA). Contains an internal precision resistor divider that senses the float voltage and an ESD protection network; sourcing ~1 mA between GND and BAT if the battery is connected in reverse."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "External supply input, operating range 4.3 V to 7 V (absolute max 11 V). Requires at least a 0.1-1 uF decoupling capacitor to GND. When VCC falls within 30 mV of VBAT, the chip enters sleep mode and BAT current drops below 2 uA."
      },
      {
        "number": "5",
        "name": "PROG",
        "type": "bidirectional",
        "description": "Charge current program, monitor, and shutdown pin. A resistor from PROG to GND sets IBAT = (VPROG/RPROG) x 1000 (typical PROG voltage 1.0 V in constant-current mode; RPROG=2 kOhm -> ~500 mA, RPROG=10 kOhm -> ~100 mA). Disconnecting PROG from GND causes an internal 2.5 uA pull-up to raise the pin; crossing the ~1.0 V manual-shutdown threshold puts the charger into standby (supply current drops to ~40 uA)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904823385059328",
        "pages": 5,
        "sha256": "48374b61c08beea0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lth7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lth7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "fd4906a853282ae403846223604abc7f386bec170592731066a4a7755e37a2f7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "TECH PUBLIC",
      "Package": "SOT-23-5L",
      "Category": "Power Management (PMIC)",
      "Pins": "5"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lth7"
  ],
  "discovery_pitch": "LTH7 (TECH PUBLIC) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lth7.kicad_sym",
    "lth7.kicad_mod",
    "lth7.glb",
    "lth7.step",
    "lth7.lbr",
    "docs/hero.png",
    "docs/lth7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-28T18:16:16.883Z"
}