3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC724XS14
Linearin · Operational Amplifier · SOIC-14
LTC724XS14 from Linearin, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output. |
| 2 | -INA | input | Amplifier A inverting input, with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V). |
| 3 | +INA | input | Amplifier A non-inverting input, with the same voltage range as -IN (VS- - 0.1 V to VS+ + 0.1 V). |
| 4 | +VS | power_in | Positive power supply of 2.0 V to 5.5 V, where split supplies are allowed as long as the voltage between VS+ and VS- is 2.0 V to 5.5 V. |
| 5 | +INB | input | Amplifier B non-inverting input, with the same voltage range as -IN (VS- - 0.1 V to VS+ + 0.1 V). |
| 6 | -INB | input | Amplifier B inverting input, with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V). |
| 7 | OUTB | output | Amplifier B output. |
| 8 | OUTC | output | Amplifier C output. |
| 9 | -INC | input | Amplifier C inverting input, with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V). |
| 10 | +INC | input | Amplifier C non-inverting input, with the same voltage range as -IN (VS- - 0.1 V to VS+ + 0.1 V). |
| 11 | -VS | power_in | Negative power supply, normally tied to ground, which can be tied to another voltage as long as the voltage between VS+ and VS- is 2.0 V to 5.5 V. |
| 12 | +IND | input | Amplifier D non-inverting input, with the same voltage range as -IN (VS- - 0.1 V to VS+ + 0.1 V). |
| 13 | -IND | input | Amplifier D inverting input, with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V). |
| 14 | OUTD | output | Amplifier D output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Linearin |
| Package | SOIC-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -3 | 0.5 | 3 | mV | 4 | |
| Offset voltage drift | VOS TC | -3 | 1 | 3 | μV/℃ | TA = −40 to +125 ℃ | 4 |
| Power supply rejection ratio | PSRR | 95 | 110 | dB | VS = 2.0 to 5.5 V, VCM < VS+ − 2V | 4 | |
| Power supply rejection ratio | PSRR | 82 | dB | TA = −40 to +125 ℃ | 4 | ||
| Input bias current | IB | 150 | pA | TA = +85 ℃ | 4 | ||
| Input bias current | IB | 500 | pA | TA = +125 ℃ | 4 | ||
| Common-mode rejection ratio | CMRR | 68 | 84 | dB | VS = 5.5 V, VCM = −0.1 to 5.6 V | 4 | |
| Common-mode rejection ratio | CMRR | 65 | dB | VCM = 0 to 5.3 V, TA = −40 to +125 ℃ | 4 | ||
| Common-mode rejection ratio | CMRR | 65 | 78 | dB | VS = 2.0 V, VCM = −0.1 to 2.1 V | 4 | |
| Common-mode rejection ratio | CMRR | 62 | dB | VCM = 0 to 1.8 V, TA = −40 to +125 ℃ | 4 | ||
| Open-loop voltage gain | AVOL | 97 | 105 | dB | RL = 10 kΩ, VO = 0.05 to 3.5 V | 4 | |
| Open-loop voltage gain | AVOL | 87 | dB | TA = −40 to +125 ℃ | 4 | ||
| Open-loop voltage gain | AVOL | 85 | 92 | dB | RL = 600 Ω, VO = 0.15 to 3.5 V | 4 | |
| Open-loop voltage gain | AVOL | 75 | dB | TA = −40 to +125 ℃ | 4 | ||
| Short-circuit current | ISC | -85 | 70 | mA | 5 | ||
| Operating supply voltage | VS | 1.8 | 5.5 | V | TA = 0 to +70 ℃ | 5 | |
| Operating supply voltage | VS | 2 | 5.5 | V | TA = −40 to +125 ℃ | 5 | |
| Quiescent current (per amplifier) | IQ | 615 | 740 | μA | VS = 2.0 V | 5 | |
| Quiescent current (per amplifier) | IQ | 780 | 940 | μA | VS = 5.5 V | 5 | |
| Operating temperature range | TA | -40 | 125 | ℃ | 5 | ||
| Package thermal resistance, SOIC-14L | θJA | 115 | ℃/W | SOIC-14L | 5 | ||
| Supply voltage, VS+ to VS− | 10 | V | 3 | ||||
| Signal input terminals current | -10 | 10 | mA | 3 | |||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 3 | ||
| Junction temperature | TJ | 150 | ℃ | 3 | |||
| Lead temperature range | 260 | ℃ | Soldering 10 sec | 3 | |||
| Electrostatic discharge voltage, human body model | HBM | -5000 | 5000 | V | MIL-STD-883J / Method 3015.9 | 3 | |
| Electrostatic discharge voltage, charged device model | CDM | -2000 | 2000 | V | ESDA/JEDEC JS-002-2014 | 3 | |
| Electrostatic discharge voltage, machine model | MM | -250 | 250 | V | JESD22-A115C | 3 | |
| Input offset current | IOS | 1 | pA | 4 | |||
| Input voltage noise | Vn | 3.7 | μVP-P | f = 0.1 to 10 Hz | 4 | ||
| Input voltage noise density | en | 8 | nV/√Hz | f = 1 kHz | 4 | ||
| Input current noise density | In | 5 | fA/√Hz | f = 1 kHz | 4 | ||
| Input capacitance | CIN | 2 | pF | Differential | 4 | ||
| Input capacitance | CIN | 3.5 | pF | Common mode | 4 | ||
| Gain bandwidth product | GBW | 11 | MHz | 4 | |||
| Slew rate | SR | 11.5 | V/μs | G = +1, CL = 100 pF, VO = 1.5 to 3.5 V | 4 | ||
| Total harmonic distortion + noise | THD+N | 0.0005 | % | G = +1, f = 1 kHz, VO = 0.5 VRMS | 4 | ||
| Settling time | tS | 0.26 | μs | To 0.1%, G = +1, 1V step | 4 | ||
| Settling time | tS | 0.34 | μs | To 0.01%, G = +1, 1V step | 4 | ||
| Overload recovery time | tOR | 0.3 | μs | VIN * Gain > VS | 4 |
CAD (KiCad official)
- Symbol:
LTC724XS14 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
ltc724xs14-etched.step/ltc724xs14-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc724xs14.step/ltc724xs14.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Linearin datasheet (24 pp, sha256
5b0689580ecafe04, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).