LTC7004EMSE#PBF

{
  "slug": "ltc7004emse-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Gate Drive ICs, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ltc7004emse#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc7004emse-pbf.kicad_sym",
    "ltc7004emse-pbf.kicad_mod",
    "ltc7004emse-pbf.glb",
    "ltc7004emse-pbf.step",
    "ltc7004emse-pbf.lbr",
    "docs/hero.png",
    "docs/ltc7004emse-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc7004emse-pbf-hero.glb",
    "ltc7004emse-pbf-hero.overlay.json",
    "ltc7004emse-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LTC7004EMSE#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management ICs",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC7004.pdf",
    "parts": {
      "symbol": "ltc7004emse-pbf.kicad_sym",
      "footprint": "ltc7004emse-pbf.kicad_mod",
      "model_3d": "ltc7004emse-pbf-hero.glb",
      "model_3d_plain": "ltc7004emse-pbf-etched.glb",
      "model_3d_step": "ltc7004emse-pbf-etched.step",
      "model_3d_step_plain": "ltc7004emse-pbf.step",
      "lbr": "ltc7004emse-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C690105",
      "digikey": "505-LTC7004EMSE#PBF-ND",
      "mouser": "584-LTC7004EMSEPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T15:58:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC7004EMSE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC7004EMSEPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Main supply pin; a bypass capacitor with a minimum value of 0.1µF should be tied between this pin and GND."
      },
      {
        "number": "2",
        "name": "VCCUV",
        "type": "input",
        "description": "VCC undervoltage lockout set pin; a voltage of 0.5V to 1.5V on this pin is multiplied by seven to set the gate drive UVLO, shorting it to ground sets 3.5V and leaving it open sets 7.0V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; the exposed pad must be soldered to the PCB for rated electrical and thermal performance."
      },
      {
        "number": "4",
        "name": "INP",
        "type": "input",
        "description": "CMOS-compatible input referenced to GND that sets the state of TGDN and TGUP, with an internal 1MΩ pull-down to GND."
      },
      {
        "number": "5",
        "name": "OVLO",
        "type": "input",
        "description": "Overvoltage lockout input; a voltage above 1.21V pulls TGDN to TS, normal operation resumes below 1.11V, and the pin should be tied to GND when not used."
      },
      {
        "number": "6",
        "name": "TGDN",
        "type": "output",
        "description": "High current gate driver pull-down that pulls down to TS; tie directly to the external high side MOSFET gate for the fastest turn-off."
      },
      {
        "number": "7",
        "name": "TGUP",
        "type": "output",
        "description": "High current gate driver pull-up that pulls up to BST; tie to TGDN for maximum transition speed, or use a series resistor to control turn-on inrush current."
      },
      {
        "number": "8",
        "name": "TS",
        "type": "power_in",
        "description": "Top (high side) source connection, or GND if used in ground referenced applications."
      },
      {
        "number": "9",
        "name": "BST",
        "type": "power_in",
        "description": "High side bootstrapped supply; an external capacitor with a minimum value of 0.1µF should be tied between this pin and TS, with voltage swing from 12V to (VTS + 12V)."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; this pin should be left floating."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad is GND and must be soldered to the PCB for rated electrical and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not assign a KiCad class to TS. It is classed as power_in here because it is the ; Pin 11 is the exposed die pad, which the datasheet labels GND. It is listed separately from pin 3 as"
        ],
        "pages_sent": 18,
        "cost_usd": 0.084,
        "at": "2026-10-30T15:58:21"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC7004.pdf",
        "pages": 18,
        "sha256": "e91bace7fe2963e2",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc7004emse-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc7004emse-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "19ef5643138cd50e80079c45a1f5375f05253a48ae1ba0ba04090a06403af0bd",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}