LTC7001IMSE#PBF

{
  "slug": "ltc7001imse-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Gate Drive ICs, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ltc7001imse#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc7001imse-pbf.kicad_sym",
    "ltc7001imse-pbf.kicad_mod",
    "ltc7001imse-pbf.glb",
    "ltc7001imse-pbf.step",
    "ltc7001imse-pbf.lbr",
    "docs/hero.png",
    "docs/ltc7001imse-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc7001imse-pbf-hero.glb",
    "ltc7001imse-pbf-hero.overlay.json",
    "ltc7001imse-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LTC7001IMSE#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management ICs",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC7001.pdf",
    "parts": {
      "symbol": "ltc7001imse-pbf.kicad_sym",
      "footprint": "ltc7001imse-pbf.kicad_mod",
      "model_3d": "ltc7001imse-pbf-hero.glb",
      "model_3d_plain": "ltc7001imse-pbf-etched.glb",
      "model_3d_step": "ltc7001imse-pbf-etched.step",
      "model_3d_step_plain": "ltc7001imse-pbf.step",
      "lbr": "ltc7001imse-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C581062",
      "digikey": "505-LTC7001IMSE#PBF-ND",
      "mouser": "584-LTC7001IMSEPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T23:29:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC7001IMSE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC7001IMSEPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Main gate driver supply pin, operating from 3.5V to 15V, with a bypass capacitor of at least 0.1µF tied between this pin and GND."
      },
      {
        "number": "2",
        "name": "VCCUV",
        "type": "passive",
        "description": "Sets the VCC undervoltage lockout through a resistor to ground, where 0.5V to 1.5V on this pin is multiplied by seven; shorting to ground gives a 3.5V UVLO and leaving it open gives 7.0V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device, which must be connected to the PCB ground plane."
      },
      {
        "number": "4",
        "name": "INP",
        "type": "input",
        "description": "CMOS-compatible input referenced to GND that sets the state of TGDN and TGUP, with an internal 1MΩ pull-down to GND and an absolute maximum range of -6V to 15V."
      },
      {
        "number": "5",
        "name": "OVLO",
        "type": "input",
        "description": "Overvoltage lockout input that pulls TGDN to TS when above 1.21V and resumes normal operation below 1.11V, with an absolute maximum of 6V and to be tied to GND when unused."
      },
      {
        "number": "6",
        "name": "TGDN",
        "type": "output",
        "description": "High current gate driver pull-down that pulls the external MOSFET gate to TS, and should be tied directly to the gate for the fastest turn-off."
      },
      {
        "number": "7",
        "name": "TGUP",
        "type": "output",
        "description": "High current gate driver pull-up that pulls the external MOSFET gate up to BST, to be tied to TGDN for maximum transition speed or used with a series resistor to control turn-on inrush current."
      },
      {
        "number": "8",
        "name": "TS",
        "type": "power_in",
        "description": "Top (high side) source connection operating from 0V to 135V, tolerant to -6V and rated to 150V absolute maximum, or tied to GND in ground-referenced applications."
      },
      {
        "number": "9",
        "name": "BST",
        "type": "power_in",
        "description": "High side bootstrapped supply pin with a swing of 12V to (VTS + 12V), requiring an external capacitor of at least 0.1µF between BST and TS."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect pin that should be left floating."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad is ground and must be soldered to the PCB for rated electrical and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: VCCUV is a resistor-programmed analog setting pin with an internal 10µA pull-up; typed as passive as; TS is the floating high side source/return; typed as power_in as a judgment call, since the datashee; Pin types for power and reference pins are inferred from the pin descriptions, not stated explicitly"
        ],
        "pages_sent": 18,
        "cost_usd": 0.0848,
        "at": "2026-10-28T23:28:47"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC7001.pdf",
        "pages": 18,
        "sha256": "2fc8d931da744f5d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc7001imse-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc7001imse-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a5afcc8dc84e908afe88a6e4e03fb45d082958f806b1f59655089d54ac833a6",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}