main
Ray
Publish 0.1.0
6117fff
LTC6994IS6-1#TRPBF
Analog Devices · Delay Lines · TSOT-23-6
LTC6994IS6-1#TRPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Logic input where rising or falling edges propagate to OUT after a programmable delay, with the LTC6994-1 delaying only one edge type. |
| 2 | GND | power_in | Ground pin that should be tied to a low inductance ground plane for best performance. |
| 3 | SET | input | Delay setting input regulated to 1V above GND, where the sourced current ISET must stay within 1.25µA to 20µA and a precision resistor to GND is the most accurate way to set the delay. |
| 4 | DIV | input | Programmable divider and polarity input whose pin voltage is converted to a 4-bit DIVCODE, with 1% resistors recommended for an accurate result. |
| 5 | V+ | power_in | Supply voltage input of 2.25V to 5.5V that should be bypassed directly to GND with a 0.1µF capacitor. |
| 6 | OUT | output | Output that swings from GND to V+ with an output resistance of approximately 30Ω, and a series resistor should limit source/sink current to 20mA when driving low impedance loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Clock and Timing |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (V+) to GND | V+ | 6 | V | 2 | |||
| Operating Temperature Range, LTC6994I | -40 | 85 | °C | LTC6994I | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 192 | °C/W | S6 TSOT-23 package | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 51 | °C/W | S6 TSOT-23 package | 2 | ||
| V+ Operating Supply Voltage Range | V+ | 2.25 | 5.5 | V | 4 | ||
| Power-On Reset Voltage | 1.95 | V | 4 | ||||
| Supply Current (Idle) | IS(IDLE) | 200 | µA | RL = ∞, RSET = 50k, NDIV ≤ 64, V+ = 5.5V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 160 | µA | RL = ∞, RSET = 50k, NDIV ≤ 64, V+ = 2.25V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 175 | µA | RL = ∞, RSET = 50k, NDIV ≥ 512, V+ = 5.5V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 140 | µA | RL = ∞, RSET = 50k, NDIV ≥ 512, V+ = 2.25V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 110 | µA | RL = ∞, RSET = 800k, NDIV ≤ 64, V+ = 5.5V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 95 | µA | RL = ∞, RSET = 800k, NDIV ≤ 64, V+ = 2.25V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 100 | µA | RL = ∞, RSET = 800k, NDIV ≥ 512, V+ = 5.5V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 90 | µA | RL = ∞, RSET = 800k, NDIV ≥ 512, V+ = 2.25V | 4 | ||
| Voltage at SET Pin | VSET | 0.97 | 1 | 1.03 | V | 4 | |
| VSET Drift Over Temperature | ∆VSET/∆T | -75 | 75 | µV/°C | 4 | ||
| Frequency-Setting Resistor | RSET | 50 | 800 | kΩ | 4 | ||
| DIV Pin Voltage | VDIV | 0 | V | V+ upper limit | 4 | ||
| DIV Pin Valid Code Range Deviation from Ideal | ∆VDIV/∆V+ | -1.5 | 1.5 | % | VDIV/V+ = (DIVCODE + 0.5)/16 | 4 | |
| DIV Pin Input Current | -10 | 10 | nA | 4 | |||
| IN Pin Input Current | -10 | 10 | nA | IN = 0V to V+ | 4 | ||
| High Level IN Pin Input Voltage | VIH | 0.7 | • V+ | 4 | |||
| Low Level IN Pin Input Voltage | VIL | 0.3 | • V+ | 4 | |||
| Output Current | IOUT(MAX) | -20 | 20 | mA | V+ = 2.7V to 5.5V | 4 | |
| High Level Output Voltage | VOH | 5.45 | 5.48 | V | V+ = 5.5V, IOUT = -1mA | 4 | |
| High Level Output Voltage | VOH | 4.84 | 5.15 | V | V+ = 5.5V, IOUT = -16mA | 4 | |
| High Level Output Voltage | VOH | 3.24 | 3.27 | V | V+ = 3.3V, IOUT = -1mA | 4 | |
| High Level Output Voltage | VOH | 2.75 | 2.99 | V | V+ = 3.3V, IOUT = -10mA | 4 | |
| High Level Output Voltage | VOH | 2.17 | 2.21 | V | V+ = 2.25V, IOUT = -1mA | 4 | |
| High Level Output Voltage | VOH | 1.58 | 1.88 | V | V+ = 2.25V, IOUT = -8mA | 4 | |
| Low Level Output Voltage | VOL | 0.02 | 0.04 | V | V+ = 5.5V, IOUT = 1mA | 4 | |
| Low Level Output Voltage | VOL | 0.26 | 0.54 | V | V+ = 5.5V, IOUT = 16mA | 4 | |
| Low Level Output Voltage | VOL | 0.03 | 0.05 | V | V+ = 3.3V, IOUT = 1mA | 4 | |
| Low Level Output Voltage | VOL | 0.22 | 0.46 | V | V+ = 3.3V, IOUT = 10mA | 4 | |
| Low Level Output Voltage | VOL | 0.03 | 0.07 | V | V+ = 2.25V, IOUT = 1mA | 4 | |
| Propagation Delay | tPD | 10 | ns | V+ = 5.5V | 4 | ||
| Propagation Delay | tPD | 14 | ns | V+ = 3.3V | 4 | ||
| Propagation Delay | tPD | 24 | ns | V+ = 2.25V | 4 | ||
| Minimum Recognized Input Pulse Width | tWIDTH | 5 | ns | V+ = 3.3V | 4 | ||
| Output Rise Time | tr | 1.1 | 1.1 | ns | V+ = 5.5V, Note 8 | 5 | |
| Output Rise Time | tr | 1.7 | 1.7 | ns | V+ = 3.3V, Note 8 | 5 | |
| Output Rise Time | tr | 2.7 | 2.7 | ns | V+ = 2.25V, Note 8 | 5 | |
| Output Fall Time | tf | 1 | 1 | ns | V+ = 5.5V, Note 8 | 5 | |
| Output Fall Time | tf | 1.6 | 1.6 | ns | V+ = 3.3V, Note 8 | 5 | |
| Output Fall Time | tf | 2.4 | 2.4 | ns | V+ = 2.25V, Note 8 | 5 | |
| Delay Accuracy | ∆tDELAY | -2.3 | 2.3 | % | NDIV ≥ 512 | 3 | |
| Delay Accuracy | ∆tDELAY | -3.4 | 3.4 | % | 8 ≤ NDIV ≤ 64 | 3 | |
| Delay Accuracy | ∆tDELAY | -5.1 | 5.1 | % | NDIV = 1 | 3 | |
| Delay Drift Over Temperature | ∆tDELAY/∆T | -0.006 | 0.006 | %/°C | NDIV ≥ 512 | 3 | |
| Delay Drift Over Temperature | ∆tDELAY/∆T | -0.008 | 0.008 | %/°C | NDIV ≤ 64 | 3 |
CAD (KiCad official)
- Symbol:
LTC6994IS6-1#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ltc6994is6-1-trpbf-etched.step/ltc6994is6-1-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6994is6-1-trpbf.step/ltc6994is6-1-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
ddc7413e4b6e837f, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC6994IS6-1#TRPBF
**Analog Devices** · Delay Lines · TSOT-23-6
LTC6994IS6-1#TRPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Logic input where rising or falling edges propagate to OUT after a programmable delay, with the LTC6994-1 delaying only one edge type. |
| 2 | GND | power_in | Ground pin that should be tied to a low inductance ground plane for best performance. |
| 3 | SET | input | Delay setting input regulated to 1V above GND, where the sourced current ISET must stay within 1.25µA to 20µA and a precision resistor to GND is the most accurate way to set the delay. |
| 4 | DIV | input | Programmable divider and polarity input whose pin voltage is converted to a 4-bit DIVCODE, with 1% resistors recommended for an accurate result. |
| 5 | V+ | power_in | Supply voltage input of 2.25V to 5.5V that should be bypassed directly to GND with a 0.1µF capacitor. |
| 6 | OUT | output | Output that swings from GND to V+ with an output resistance of approximately 30Ω, and a series resistor should limit source/sink current to 20mA when driving low impedance loads. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Clock and Timing |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (V+) to GND | V+ | | | 6 | V | | 2 |
| Operating Temperature Range, LTC6994I | | -40 | | 85 | °C | LTC6994I | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | | 192 | °C/W | S6 TSOT-23 package | 2 |
| Thermal Resistance Junction-to-Case | θJC | | | 51 | °C/W | S6 TSOT-23 package | 2 |
| V+ Operating Supply Voltage Range | V+ | 2.25 | | 5.5 | V | | 4 |
| Power-On Reset Voltage | | | | 1.95 | V | | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 200 | µA | RL = ∞, RSET = 50k, NDIV ≤ 64, V+ = 5.5V | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 160 | µA | RL = ∞, RSET = 50k, NDIV ≤ 64, V+ = 2.25V | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 175 | µA | RL = ∞, RSET = 50k, NDIV ≥ 512, V+ = 5.5V | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 140 | µA | RL = ∞, RSET = 50k, NDIV ≥ 512, V+ = 2.25V | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 110 | µA | RL = ∞, RSET = 800k, NDIV ≤ 64, V+ = 5.5V | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 95 | µA | RL = ∞, RSET = 800k, NDIV ≤ 64, V+ = 2.25V | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 100 | µA | RL = ∞, RSET = 800k, NDIV ≥ 512, V+ = 5.5V | 4 |
| Supply Current (Idle) | IS(IDLE) | | | 90 | µA | RL = ∞, RSET = 800k, NDIV ≥ 512, V+ = 2.25V | 4 |
| Voltage at SET Pin | VSET | 0.97 | 1 | 1.03 | V | | 4 |
| VSET Drift Over Temperature | ∆VSET/∆T | -75 | | 75 | µV/°C | | 4 |
| Frequency-Setting Resistor | RSET | 50 | | 800 | kΩ | | 4 |
| DIV Pin Voltage | VDIV | 0 | | | V | V+ upper limit | 4 |
| DIV Pin Valid Code Range Deviation from Ideal | ∆VDIV/∆V+ | -1.5 | | 1.5 | % | VDIV/V+ = (DIVCODE + 0.5)/16 | 4 |
| DIV Pin Input Current | | -10 | | 10 | nA | | 4 |
| IN Pin Input Current | | -10 | | 10 | nA | IN = 0V to V+ | 4 |
| High Level IN Pin Input Voltage | VIH | 0.7 | | | • V+ | | 4 |
| Low Level IN Pin Input Voltage | VIL | | | 0.3 | • V+ | | 4 |
| Output Current | IOUT(MAX) | -20 | | 20 | mA | V+ = 2.7V to 5.5V | 4 |
| High Level Output Voltage | VOH | 5.45 | 5.48 | | V | V+ = 5.5V, IOUT = -1mA | 4 |
| High Level Output Voltage | VOH | 4.84 | 5.15 | | V | V+ = 5.5V, IOUT = -16mA | 4 |
| High Level Output Voltage | VOH | 3.24 | 3.27 | | V | V+ = 3.3V, IOUT = -1mA | 4 |
| High Level Output Voltage | VOH | 2.75 | 2.99 | | V | V+ = 3.3V, IOUT = -10mA | 4 |
| High Level Output Voltage | VOH | 2.17 | 2.21 | | V | V+ = 2.25V, IOUT = -1mA | 4 |
| High Level Output Voltage | VOH | 1.58 | 1.88 | | V | V+ = 2.25V, IOUT = -8mA | 4 |
| Low Level Output Voltage | VOL | | 0.02 | 0.04 | V | V+ = 5.5V, IOUT = 1mA | 4 |
| Low Level Output Voltage | VOL | | 0.26 | 0.54 | V | V+ = 5.5V, IOUT = 16mA | 4 |
| Low Level Output Voltage | VOL | | 0.03 | 0.05 | V | V+ = 3.3V, IOUT = 1mA | 4 |
| Low Level Output Voltage | VOL | | 0.22 | 0.46 | V | V+ = 3.3V, IOUT = 10mA | 4 |
| Low Level Output Voltage | VOL | | 0.03 | 0.07 | V | V+ = 2.25V, IOUT = 1mA | 4 |
| Propagation Delay | tPD | | | 10 | ns | V+ = 5.5V | 4 |
| Propagation Delay | tPD | | | 14 | ns | V+ = 3.3V | 4 |
| Propagation Delay | tPD | | | 24 | ns | V+ = 2.25V | 4 |
| Minimum Recognized Input Pulse Width | tWIDTH | 5 | | | ns | V+ = 3.3V | 4 |
| Output Rise Time | tr | | 1.1 | 1.1 | ns | V+ = 5.5V, Note 8 | 5 |
| Output Rise Time | tr | | 1.7 | 1.7 | ns | V+ = 3.3V, Note 8 | 5 |
| Output Rise Time | tr | | 2.7 | 2.7 | ns | V+ = 2.25V, Note 8 | 5 |
| Output Fall Time | tf | | 1 | 1 | ns | V+ = 5.5V, Note 8 | 5 |
| Output Fall Time | tf | | 1.6 | 1.6 | ns | V+ = 3.3V, Note 8 | 5 |
| Output Fall Time | tf | | 2.4 | 2.4 | ns | V+ = 2.25V, Note 8 | 5 |
| Delay Accuracy | ∆tDELAY | -2.3 | | 2.3 | % | NDIV ≥ 512 | 3 |
| Delay Accuracy | ∆tDELAY | -3.4 | | 3.4 | % | 8 ≤ NDIV ≤ 64 | 3 |
| Delay Accuracy | ∆tDELAY | -5.1 | | 5.1 | % | NDIV = 1 | 3 |
| Delay Drift Over Temperature | ∆tDELAY/∆T | -0.006 | | 0.006 | %/°C | NDIV ≥ 512 | 3 |
| Delay Drift Over Temperature | ∆tDELAY/∆T | -0.008 | | 0.008 | %/°C | NDIV ≤ 64 | 3 |
## CAD (KiCad official)
- Symbol: `LTC6994IS6-1#TRPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ltc6994is6-1-trpbf-etched.step` / `ltc6994is6-1-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc6994is6-1-trpbf.step` / `ltc6994is6-1-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LTC6994-1-6994-2.pdf) (28 pp, sha256 `ddc7413e4b6e837f`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc6994is6-1-trpbf-datasheet.pdf)