main
Ray Publish 0.1.0 6a6c424
{
  "slug": "ltc6994idcb-1-trmpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Delay Lines, DFN-6-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "clock and timing",
    "ltc6994idcb-1#trmpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc6994idcb-1-trmpbf.kicad_sym",
    "ltc6994idcb-1-trmpbf.kicad_mod",
    "ltc6994idcb-1-trmpbf.glb",
    "ltc6994idcb-1-trmpbf.step",
    "ltc6994idcb-1-trmpbf.lbr",
    "docs/hero.png",
    "docs/ltc6994idcb-1-trmpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc6994idcb-1-trmpbf-hero.glb",
    "ltc6994idcb-1-trmpbf-hero.overlay.json",
    "ltc6994idcb-1-trmpbf-etched.glb"
  ],
  "component": {
    "mpn": "LTC6994IDCB-1#TRMPBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-6-EP(2x3)",
    "pin_count": 7,
    "category": "Clock and Timing",
    "subcategory": "Delay Lines",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC6994-1-6994-2.pdf",
    "parts": {
      "symbol": "ltc6994idcb-1-trmpbf.kicad_sym",
      "footprint": "ltc6994idcb-1-trmpbf.kicad_mod",
      "model_3d": "ltc6994idcb-1-trmpbf-hero.glb",
      "model_3d_plain": "ltc6994idcb-1-trmpbf-etched.glb",
      "model_3d_step": "ltc6994idcb-1-trmpbf-etched.step",
      "model_3d_step_plain": "ltc6994idcb-1-trmpbf.step",
      "lbr": "ltc6994idcb-1-trmpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C690033",
      "digikey": "LTC6994IDCB-1#TRMPBFTR-ND",
      "mouser": "584-C6994IDCB-1TMPF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:19:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LTC6994IDCB-1#TRMPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-C6994IDCB-1TMPF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "V+",
        "type": "power_in",
        "description": "Supply voltage range is 2.25V to 5.5V; keep it free from noise and ripple and bypass it directly to GND with a 0.1µF capacitor."
      },
      {
        "number": "2",
        "name": "DIV",
        "type": "input",
        "description": "Programmable divider and polarity input whose voltage is converted to a 4-bit DIVCODE, with 1% resistors recommended for an accurate result and capacitance limited to less than 100pF."
      },
      {
        "number": "3",
        "name": "SET",
        "type": "input",
        "description": "Delay setting input regulated to 1V above GND, with ISET programmable from 1.25µA to 20µA, and the delayed output does not occur if ISET drops below approximately 500nA."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "input",
        "description": "Logic input whose rising or falling edges propagate to OUT after a programmable delay; the LTC6994-1 delays only one edge while the LTC6994-2 delays both edges."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that should be tied to a low inductance ground plane for best performance."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Output swings from GND to V+ with an output resistance of approximately 30Ω, and a series resistor should be used to limit source/sink current to 20mA when driving an LED or low impedance load."
      },
      {
        "number": "7",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed pad connected to GND internally, with PCB connection optional."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 10,
        "cost_usd": 0.0172,
        "at": "2026-10-28T15:19:10"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/LTC6994-1-6994-2.pdf",
        "pages": 28,
        "sha256": "ddc7413e4b6e837f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc6994idcb-1-trmpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          2.0,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9e9717e4243592ddee85975f8b63d3ee7457c63742f9c95cc249048abddb1f1a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc6994idcb-1-trmpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.02,
          2.0,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9542602272434a2927c34da2497b33dd9940a0c9f27189b43b72dbdc4352dc3d",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}