Generated by kicad-footprint-generator · KiCad file format 20260206
LTC6993HS6-3#WTRMPBF
Analog Devices · Monostable Multivibrators · TSOT-23-6
LTC6993HS6-3#WTRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TRIG | input | Trigger input: a falling edge initiates the output pulse on the LTC6993-3 version, which ignores additional triggers until the pulse terminates (non-retriggerable). |
| 2 | GND | power_in | Ground; tie to a low inductance ground plane for best performance. |
| 3 | SET | input | Pulse width setting input regulated to 1V above GND, with ISET between 1.25µA and 20µA; the output pulse continues indefinitely if ISET drops below approximately 500nA. |
| 4 | DIV | input | Programmable divider and polarity input whose voltage is converted to a 4-bit DIVCODE, with the MSB setting output polarity; limit its capacitance to less than 100pF. |
| 5 | V+ | power_in | Supply voltage input of 2.25V to 5.5V that should be bypassed directly to GND with a 0.1µF capacitor. |
| 6 | OUT | output | Output that swings from GND to V+ with an output resistance of approximately 30Ω and should use a series resistor to limit source/sink current to 20mA when driving low impedance loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Logic ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Pulse Width | tOUT | 1 | 33.55 | sec | 4 | ||
| Pulse Width Accuracy | ∆tOUT | -3 | 3 | % | NDIV ≥ 512 | 4 | |
| Pulse Width Accuracy | ∆tOUT | -4.4 | 4.4 | % | 8 ≤ NDIV ≤ 64 | 4 | |
| Pulse Width Accuracy | ∆tOUT | -6.4 | 6.4 | % | NDIV = 1 (LTC6993-3 or LTC6993-4) | 4 | |
| Pulse Width Drift Over Temperature | ∆tOUT/∆T | -0.006 | 0.006 | %/°C | NDIV ≥ 512 | 4 | |
| Pulse Width Drift Over Temperature | ∆tOUT/∆T | -0.008 | 0.008 | %/°C | NDIV ≤ 64 | 4 | |
| Pulse Width Change With Supply | -0.6 | -0.4 | % | NDIV ≥ 512, V+ = 4.5V to 5.5V | 4 | ||
| Pulse Width Change With Supply | -0.2 | -0.1 | % | NDIV ≥ 512, V+ = 2.25V to 4.5V | 4 | ||
| V+ Operating Supply Voltage Range | V+ | 2.25 | 5.5 | V | 4 | ||
| Supply Current (Idle) | IS(IDLE) | 165 | 200 | µA | RL = ∞, RSET = 50k, NDIV ≤ 64, V+ = 5.5V | 4 | |
| Supply Current (Idle) | IS(IDLE) | 125 | 160 | µA | RL = ∞, RSET = 50k, NDIV ≤ 64, V+ = 2.25V | 4 | |
| Supply Current (Idle) | IS(IDLE) | 135 | 175 | µA | RL = ∞, RSET = 50k, NDIV ≥ 512, V+ = 5.5V | 4 | |
| Supply Current (Idle) | IS(IDLE) | 105 | 140 | µA | RL = ∞, RSET = 50k, NDIV ≥ 512, V+ = 2.25V | 4 | |
| Supply Current (Idle) | IS(IDLE) | 70 | 110 | µA | RL = ∞, RSET = 800k, NDIV ≤ 64, V+ = 5.5V | 4 | |
| Supply Current (Idle) | IS(IDLE) | 60 | 95 | µA | RL = ∞, RSET = 800k, NDIV ≤ 64, V+ = 2.25V | 4 | |
| Supply Current (Idle) | IS(IDLE) | 65 | 100 | µA | RL = ∞, RSET = 800k, NDIV ≥ 512, V+ = 5.5V | 4 | |
| Supply Current (Idle) | IS(IDLE) | 55 | 90 | µA | RL = ∞, RSET = 800k, NDIV ≥ 512, V+ = 2.25V | 4 | |
| VSET Voltage at SET Pin | VSET | 0.97 | 1 | 1.03 | V | 4 | |
| VSET Drift Over Temperature | ∆VSET/∆T | -75 | 75 | µV/°C | 4 | ||
| RSET Frequency-Setting Resistor | RSET | 50 | 800 | kΩ | 4 | ||
| DIV Pin Voltage | VDIV | 0 | V | Upper limit is V+ | 4 | ||
| DIV Pin Valid Code Range Deviation | ∆VDIV/∆V+ | -1.5 | 1.5 | % | Deviation from ideal VDIV/V+ = (DIVCODE + 0.5)/16 | 4 | |
| DIV Pin Input Current | -10 | 10 | nA | 4 | |||
| TRIG Pin Input Current | -10 | 10 | nA | TRIG = 0V to V+ | 4 | ||
| High Level TRIG Pin Input Voltage | VIH | 0.7 | V | Multiple of V+ (0.7 • V+) | 5 | ||
| Low Level TRIG Pin Input Voltage | VIL | 0.3 | V | Multiple of V+ (0.3 • V+) | 5 | ||
| Output Current | IOUT(MAX) | -20 | 20 | mA | V+ = 2.7V to 5.5V | 5 | |
| High Level Output Voltage | VOH | 5.45 | 5.48 | V | V+ = 5.5V, IOUT = -1mA | 5 | |
| High Level Output Voltage | VOH | 4.84 | 5.15 | V | V+ = 5.5V, IOUT = -16mA | 5 | |
| High Level Output Voltage | VOH | 3.24 | 3.27 | V | V+ = 3.3V, IOUT = -1mA | 5 | |
| High Level Output Voltage | VOH | 2.75 | 2.99 | V | V+ = 3.3V, IOUT = -10mA | 5 | |
| High Level Output Voltage | VOH | 2.17 | 2.21 | V | V+ = 2.25V, IOUT = -1mA | 5 | |
| High Level Output Voltage | VOH | 1.58 | 1.88 | V | V+ = 2.25V, IOUT = -8mA | 5 | |
| Low Level Output Voltage | VOL | 0.02 | 0.04 | V | V+ = 5.5V, IOUT = 1mA | 5 | |
| Low Level Output Voltage | VOL | 0.26 | 0.54 | V | V+ = 5.5V, IOUT = 16mA | 5 | |
| Low Level Output Voltage | VOL | 0.03 | 0.05 | V | V+ = 3.3V, IOUT = 1mA | 5 | |
| Low Level Output Voltage | VOL | 0.22 | 0.46 | V | V+ = 3.3V, IOUT = 10mA | 5 | |
| Low Level Output Voltage | VOL | 0.03 | 0.07 | V | V+ = 2.25V, IOUT = 1mA | 5 | |
| Supply Voltage (V+) to GND | V+ | 6 | V | V+ to GND | 2 | ||
| Maximum Voltage on Any Pin | VPIN | -0.3 | V | Relative to GND; upper limit is V+ + 0.3V | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 192 | °C/W | S6 package | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 51 | °C/W | S6 package | 2 |
CAD (KiCad official)
- Symbol:
LTC6993HS6-3#WTRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ltc6993hs6-3-wtrmpbf-etched.step/ltc6993hs6-3-wtrmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6993hs6-3-wtrmpbf.step/ltc6993hs6-3-wtrmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
ae8a9c5794ce0a01, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).