Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC6992HS6-3#WTRMPBF

Analog Devices · Timers / Clock Oscillators · TSOT-23-6

LTC6992HS6-3#WTRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MOD input Pulse-width modulation input whose voltage sets the output duty cycle, with linear control between 0.1·VSET and 0.9·VSET (approximately 100mV to 900mV).
2 GND power_in Ground, to be tied to a low inductance ground plane for best performance.
3 SET input Frequency-setting input regulated to 1V above GND, where the sourced ISET current (1.25µA to 20µA) programs the master oscillator frequency and oscillation stops below about 500nA.
4 DIV input Programmable divider and polarity input whose voltage is converted into a 4-bit DIVCODE, with the MSB (POL) inverting the PWM output, and capacitance should be limited to less than 100pF.
5 V+ power_in Supply voltage pin (2.25V to 5.5V) that should be kept free from noise and ripple and bypassed directly to GND with a 0.1µF capacitor.
6 OUT output Oscillator output swinging from GND to V+ with approximately 30Ω output resistance, requiring a series resistor to limit source/sink current to 20mA when driving low-impedance loads.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6
Category RTC/Clock Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Accuracy (25°C) ΔfOUT -1.7 0.8 1.7 % 3.81Hz ≤ fOUT ≤ 1MHz, TA = 25°C 4
Frequency Accuracy (full temp) ΔfOUT -2.4 2.4 % 3.81Hz ≤ fOUT ≤ 1MHz, over full temperature range 4
Frequency Drift Over Supply ΔfOUT/ΔV+ 0.25 0.65 %/V V+ = 4.5V to 5.5V 4
Frequency Drift Over Supply ΔfOUT/ΔV+ 0.08 0.18 %/V V+ = 2.25V to 4.5V 4
PWM Duty Cycle Accuracy ΔD -3.7 3 3.7 % VMOD = 0.2 • VSET to 0.8 • VSET 4
PWM Duty Cycle Accuracy (full temp) ΔD -4.5 4.5 % VMOD = 0.2 • VSET to 0.8 • VSET 4
PWM Duty Cycle Accuracy (outside range) ΔD -4.9 4.9 % VMOD < 0.2 • VSET or VMOD > 0.8 • VSET 4
Maximum Duty Cycle Limit DMAX 90.5 95 99 % LTC6992-2/LTC6992-3, POL = 0, VMOD = 1V 4
Operating Supply Voltage Range V+ 2.25 5.5 V 4
Supply Current IS 365 450 µA RL = ∞, RSET = 50k, NDIV = 1, V+ = 5.5V 4
Supply Current IS 225 285 µA RL = ∞, RSET = 50k, NDIV = 1, V+ = 2.25V 4
Supply Current IS 350 420 µA RL = ∞, RSET = 50k, NDIV = 4, V+ = 5.5V 4
Supply Current IS 225 280 µA RL = ∞, RSET = 50k, NDIV = 4, V+ = 2.25V 4
Supply Current IS 325 390 µA RL = ∞, RSET = 50k, NDIV ≥ 16, V+ = 5.5V 4
Supply Current IS 215 265 µA RL = ∞, RSET = 50k, NDIV ≥ 16, V+ = 2.25V 4
Supply Current IS 120 170 µA RL = ∞, RSET = 800k, NDIV = 1 to 16,384, V+ = 5.5V 4
Supply Current IS 105 150 µA RL = ∞, RSET = 800k, NDIV = 1 to 16,384, V+ = 2.25V 4
Voltage at SET Pin VSET 0.97 1 1.03 V 5
Frequency-Setting Resistor RSET 50 800 kΩ 5
MOD Pin Input Current -10 10 nA 5
DIV Pin Voltage VDIV 0 V upper limit V+ 5
DIV Pin Valid Code Range Deviation ΔVDIV/ΔV+ -1.5 1.5 % Deviation from Ideal VDIV/V+ = (DIVCODE + 0.5)/16 5
DIV Pin Input Current -10 10 nA 5
Output Current IOUT(MAX) -20 20 mA V+ = 2.7V to 5.5V 5
High Level Output Voltage VOH 5.45 5.48 V V+ = 5.5V, IOUT = -1mA 5
High Level Output Voltage VOH 4.84 5.15 V V+ = 5.5V, IOUT = -16mA 5
High Level Output Voltage VOH 3.24 3.27 V V+ = 3.3V, IOUT = -1mA 5
High Level Output Voltage VOH 2.75 2.99 V V+ = 3.3V, IOUT = -10mA 5
High Level Output Voltage VOH 2.17 2.21 V V+ = 2.25V, IOUT = -1mA 5
High Level Output Voltage VOH 1.58 1.88 V V+ = 2.25V, IOUT = -8mA 5
Low Level Output Voltage VOL 0.02 0.04 V V+ = 5.5V, IOUT = 1mA 5
Low Level Output Voltage VOL 0.26 0.54 V V+ = 5.5V, IOUT = 16mA 5
Low Level Output Voltage VOL 0.03 0.05 V V+ = 3.3V, IOUT = 1mA 5
Low Level Output Voltage VOL 0.22 0.46 V V+ = 3.3V, IOUT = 10mA 5
Low Level Output Voltage VOL 0.03 0.07 V V+ = 2.25V, IOUT = 1mA 5
Supply Voltage (V+) to GND V+ 6 V 2
Maximum Voltage On Any Pin VPIN -0.3 V (GND, 0.3V) ≤ VPIN ≤ (V+ + 0.3V) 2
Operating Temperature Range (H grade) -40 125 °C LTC6992H 2
Specified Temperature Range (H grade) -40 125 °C LTC6992H 2
Junction Temperature TJMAX 150 °C 2
Storage Temperature Range -65 150 °C 2
Thermal Resistance Junction-to-Ambient θJA 192 °C/W S6 package 2
Thermal Resistance Junction-to-Case θJC 51 °C/W S6 package 2
Output Frequency fOUT 3.81 1e+06 Hz 4
Frequency Drift Over Temperature ΔfOUT/ΔT 0.005 %/°C printed ±0.005 4
Minimum Duty Cycle Limit DMIN 0 % LTC6992-1/LTC6992-3, POL = 0, VMOD = 0V 4
Power-On Reset Voltage 1.95 V 4
VSET Drift Over Temperature ΔVSET/ΔT 75 µV/°C printed ±75 5
Output Rise Time tr 1.1 ns V+ = 5.5V, RLOAD = ∞ 5
Output Fall Time tf 1 ns V+ = 5.5V, RLOAD = ∞ 5

CAD (KiCad official)

  • Symbol: LTC6992HS6-3#WTRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ltc6992hs6-3-wtrmpbf-etched.step / ltc6992hs6-3-wtrmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6992hs6-3-wtrmpbf.step / ltc6992hs6-3-wtrmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (34 pp, sha256 a3a751f584fe2fcb, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF