main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc6992cs6-2-trmpbf: viewers · Ray
ltc6992cs6-2-trmpbf-etched.glb Publish 0.1.0 · Ray
ltc6992cs6-2-trmpbf-etched.step ltc6992cs6-2-trmpbf: factory component page (tier=mfr) · Ray
ltc6992cs6-2-trmpbf-hero.glb ltc6992cs6-2-trmpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc6992cs6-2-trmpbf-hero.overlay.json Publish 0.1.0 · Ray
ltc6992cs6-2-trmpbf.glb Publish 0.1.0 · Ray
ltc6992cs6-2-trmpbf.kicad_mod Publish 0.1.0 · Ray
ltc6992cs6-2-trmpbf.kicad_sym Publish 0.1.0 · Ray
ltc6992cs6-2-trmpbf.lbr Publish 0.1.0 · Ray
ltc6992cs6-2-trmpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LTC6992CS6-2#TRMPBF

Analog Devices · Timers / Clock Oscillators · TSOT-23-6L

LTC6992CS6-2#TRMPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MOD input Pulse-width modulation input whose linear control range is 0.1·VSET to 0.9·VSET (approximately 100mV to 900mV); beyond those limits the output clamps at 5% or 95%, or stops oscillating at 0% or 100% duty cycle, depending on the version.
2 GND power_in Ground; tie to a low inductance ground plane for best performance.
3 SET input Frequency-setting input regulated to 1V above GND, with ISET programmable from 1.25µA to 20µA; the output stops oscillating if ISET drops below approximately 500nA, and capacitance on this pin should be kept below 10pF (below 100pF maximum).
4 DIV input Programmable divider and polarity input whose voltage is converted to a 4-bit DIVCODE, where the MSB sets polarity (POL); use 1% resistors for accuracy and limit capacitance to less than 100pF.
5 V+ power_in Supply voltage input operating from 2.25V to 5.5V, which should be kept free from noise and ripple and bypassed directly to GND with a 0.1µF capacitor.
6 OUT output Oscillator output that swings from GND to V+ with an output resistance of approximately 30Ω; a series resistor should be used when driving an LED or other low-impedance load to limit source/sink current to 20mA.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6L
Category RTC/Clock Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency fOUT 3.81 1e+06 Hz 4
Frequency Accuracy ∆fOUT -1.7 0.8 1.7 % 3.81Hz ≤ fOUT ≤ 1MHz 4
Frequency Drift Over Temperature ∆fOUT/∆T -0.005 0.005 %/°C 4
Frequency Drift Over Supply ∆fOUT/∆V+ 0.25 0.65 %/V V+ = 4.5V to 5.5V 4
Frequency Drift Over Supply ∆fOUT/∆V+ 0.08 0.18 %/V V+ = 2.25V to 4.5V 4
PWM Duty Cycle Accuracy ∆D -3.7 3 3.7 % VMOD = 0.2 • VSET to 0.8 • VSET 4
PWM Duty Cycle Accuracy ∆D -4.9 4.5 4.9 % VMOD < 0.2 • VSET or VMOD > 0.8 • VSET 4
Maximum Duty Cycle Limit (LTC6992-2) DMAX 90.5 95 99 % LTC6992-2/LTC6992-3, POL = 0, VMOD = 1V 4
Minimum Duty Cycle Limit (LTC6992-2) DMIN 1 5 9.5 % LTC6992-2/LTC6992-4, POL = 0, VMOD = 0V 4
V+ Operating Supply Voltage Range V+ 2.25 5.5 V 4
Supply Current IS 365 450 µA RL = ∞, RSET = 50k, NDIV = 1, V+ = 5.5V 4
Supply Current IS 225 285 µA RL = ∞, RSET = 50k, NDIV = 1, V+ = 2.25V 4
Supply Current IS 350 420 µA RL = ∞, RSET = 50k, NDIV = 4, V+ = 5.5V 4
Supply Current IS 225 280 µA RL = ∞, RSET = 50k, NDIV = 4, V+ = 2.25V 4
Supply Current IS 325 390 µA RL = ∞, RSET = 50k, NDIV ≥ 16, V+ = 5.5V 4
Supply Current IS 215 265 µA RL = ∞, RSET = 50k, NDIV ≥ 16, V+ = 2.25V 4
Supply Current IS 120 170 µA RL = ∞, RSET = 800k, NDIV = 1 to 16,384, V+ = 5.5V 4
Supply Current IS 105 150 µA RL = ∞, RSET = 800k, NDIV = 1 to 16,384, V+ = 2.25V 4
VSET Voltage at SET Pin VSET 0.97 1 1.03 V 5
VSET Drift Over Temperature ∆VSET/∆T -75 75 µV/°C 5
Frequency-Setting Resistor RSET 50 800 kΩ 5
MOD Pin Input Current IMOD -10 10 nA 5
DIV Pin Valid Code Range Deviation ∆VDIV/∆V+ -1.5 1.5 % Deviation from Ideal VDIV/V+ = (DIVCODE + 0.5)/16 5
DIV Pin Input Current IDIV -10 10 nA 5
Output Current IOUT(MAX) -20 20 mA V+ = 2.7V to 5.5V 5
High Level Output Voltage VOH 5.45 5.48 V V+ = 5.5V, IOUT = -1mA 5
High Level Output Voltage VOH 4.84 5.15 V V+ = 5.5V, IOUT = -16mA 5
High Level Output Voltage VOH 3.24 3.27 V V+ = 3.3V, IOUT = -1mA 5
High Level Output Voltage VOH 2.75 2.99 V V+ = 3.3V, IOUT = -10mA 5
High Level Output Voltage VOH 2.17 2.21 V V+ = 2.25V, IOUT = -1mA 5
High Level Output Voltage VOH 1.58 1.88 V V+ = 2.25V, IOUT = -8mA 5
Low Level Output Voltage VOL 0.02 0.04 V V+ = 5.5V, IOUT = 1mA 5
Low Level Output Voltage VOL 0.26 0.54 V V+ = 5.5V, IOUT = 16mA 5
Low Level Output Voltage VOL 0.03 0.05 V V+ = 3.3V, IOUT = 1mA 5
Low Level Output Voltage VOL 0.22 0.46 V V+ = 3.3V, IOUT = 10mA 5
Low Level Output Voltage VOL 0.03 0.07 V V+ = 2.25V, IOUT = 1mA 5
Supply Voltage (V+) to GND V+ 6 V Referenced to GND 2
Operating Temperature Range, LTC6992C TOP -40 85 °C LTC6992C (Note 2) 2
Specified Temperature Range, LTC6992C TSPEC 0 70 °C LTC6992C (Note 3) 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Junction-to-Ambient Thermal Resistance, S6 Package θJA 192 °C/W S6 6-lead TSOT-23 package 2
Junction-to-Case Thermal Resistance, S6 Package θJC 51 °C/W S6 6-lead TSOT-23 package 2

CAD (KiCad official)

  • Symbol: LTC6992CS6-2#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6L (KiCad packages3D, STEP)
  • 3D model files: ltc6992cs6-2-trmpbf-etched.step / ltc6992cs6-2-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6992cs6-2-trmpbf.step / ltc6992cs6-2-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (34 pp, sha256 a3a751f584fe2fcb, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF