Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC6991IS6#TRMPBF

Analog Devices · Timers / Clock Oscillators · TSOT-23-6

LTC6991IS6#TRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RST input Output reset input whose active level depends on POL: when POL = 0 setting RST high forces OUT low, and when POL = 1 setting RST low forces OUT high.
2 GND power_in Ground; tie to a low inductance ground plane for best performance.
3 SET input Frequency-setting input regulated to 1V above GND, with an ISET range of 1.25µA to 20µA; oscillation stops if ISET drops below approximately 500nA.
4 DIV input Programmable divider and polarity input read by a V+ referenced A/D converter, with capacitance limited to less than 100pF and resistor divider accuracy of 1% recommended.
5 V+ power_in Supply voltage input from 2.25V to 5.5V, which should be bypassed directly to GND with a 0.1µF capacitor.
6 OUT output Oscillator output that swings from GND to V+ with an output resistance of approximately 30Ω; a series resistor should limit source/sink current to 20mA when driving an LED or other low impedance load.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6
Category Clock and Timing
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (V+) to GND V+ 6 V 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Operating Temperature Range LTC6991I -40 85 °C LTC6991I 2
Thermal Resistance Junction-to-Ambient θJA 192 °C/W S6 TSOT-23 package 2
Thermal Resistance Junction-to-Case θJC 51 °C/W S6 TSOT-23 package 2
Output Clock Period tOUT 34360 Seconds 3
Output Frequency fOUT 977 Hz 3
Frequency Accuracy ∆fOUT -1.5 0.8 1.5 % 29.1µHz ≤ fOUT ≤ 977Hz 3
Frequency Accuracy over full operating temperature range ∆fOUT -2.2 2.2 % 29.1µHz ≤ fOUT ≤ 977Hz, l (full operating temperature range) 3
Frequency Drift Over Temperature ∆fOUT/∆T -0.005 0.005 %/°C 3
Frequency Drift Over Supply ∆fOUT/∆V+ 0.23 0.55 %/V V+ = 4.5V to 5.5V 3
Frequency Drift Over Supply ∆fOUT/∆V+ 0.06 0.16 %/V V+ = 2.25V to 4.5V 3
Voltage at SET Pin VSET 0.97 1 1.03 V 3
VSET Drift Over Temperature ∆VSET/∆T -75 75 µV/°C 3
Frequency-Setting Resistor RSET 50 800 kΩ 3
DIV Pin Valid Code Range Deviation from Ideal ∆VDIV/∆V+ -1.5 1.5 % Deviation from Ideal VDIV/V+ = (DIVCODE + 0.5)/16 3
DIV Pin Input Current -10 10 nA 3
V+ Operating Supply Voltage Range V+ 2.25 5.5 V 3
Supply Current IS 135 170 µA RL = ∞, RSET = 50k V+ = 5.5V 3
Supply Current IS 105 135 µA RL = ∞, RSET = 50k V+ = 2.25V 3
Supply Current IS 100 130 µA RL = ∞, RSET = 100k V+ = 5.5V 3
Supply Current IS 80 105 µA RL = ∞, RSET = 100k V+ = 2.25V 3
Supply Current IS 65 100 µA RL = ∞, RSET = 800k V+ = 5.5V 3
Supply Current IS 55 85 µA RL = ∞, RSET = 800k V+ = 2.25V 3
RST Pin Input Current -10 10 nA RST = 0V to V+ 4
Output Current IOUT(MAX) -20 20 mA V+ = 2.7V to 5.5V 4
High Level Output Voltage VOH 5.45 5.48 V V+ = 5.5V IOUT = -1mA 4
High Level Output Voltage VOH 4.84 5.15 V V+ = 5.5V IOUT = -16mA 4
High Level Output Voltage VOH 3.24 3.27 V V+ = 3.3V IOUT = -1mA 4
High Level Output Voltage VOH 2.75 2.99 V V+ = 3.3V IOUT = -10mA 4
High Level Output Voltage VOH 2.17 2.21 V V+ = 2.25V IOUT = -1mA 4
High Level Output Voltage VOH 1.58 1.88 V V+ = 2.25V IOUT = -8mA 4
Low Level Output Voltage VOL 0.02 0.04 V V+ = 5.5V IOUT = 1mA 4
Low Level Output Voltage VOL 0.26 0.54 V V+ = 5.5V IOUT = 16mA 4
Low Level Output Voltage VOL 0.03 0.05 V V+ = 3.3V IOUT = 1mA 4
Low Level Output Voltage VOL 0.22 0.46 V V+ = 3.3V IOUT = 10mA 4
Low Level Output Voltage VOL 0.03 0.07 V V+ = 2.25V IOUT = 1mA 4
Minimum Input Pulse Width tWIDTH 5 ns V+ = 3.3V 4

CAD (KiCad official)

  • Symbol: LTC6991IS6#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ltc6991is6-trmpbf-etched.step / ltc6991is6-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6991is6-trmpbf.step / ltc6991is6-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 1daf98cf85d155f9, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF