3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC6990HS6#WTRMPBF
Analog Devices · Timers / Clock Oscillators · TSOT-23-6
LTC6990HS6#WTRMPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable: driving OE high enables the output driver, while driving it low disables the output asynchronously so OUT is forced low (Hi-Z = 0) or floated (Hi-Z = 1). |
| 2 | GND | power_in | Ground; tie to a low inductance ground plane for best performance. |
| 3 | SET | input | Frequency-setting input regulated to 1V above GND, with ISET range 1.25µA to 40µA; the output stops if ISET drops below approximately 500nA, and capacitance on this pin should be less than 10pF. |
| 4 | DIV | input | Programmable divider and Hi-Z mode input, where a V+ referenced A/D converter reads VDIV to determine a 4-bit DIVCODE; capacitance on this pin should be limited to less than 100pF. |
| 5 | V+ | power_in | Supply voltage pin rated 2.25V to 5.5V, which must be kept free from noise and ripple and bypassed directly to GND with a 0.1µF capacitor. |
| 6 | OUT | output | Oscillator output that swings from GND to V+ with an output resistance of approximately 30Ω; a series output resistor should be used to limit source/sink current to 20mA when driving an LED or other low-impedance load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Clock and Timing |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
LTC6990HS6#WTRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ltc6990hs6-wtrmpbf-etched.step/ltc6990hs6-wtrmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6990hs6-wtrmpbf.step/ltc6990hs6-wtrmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (30 pp, sha256
57c3612930febe0d, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).