Generated by kicad-footprint-generator · KiCad file format 20260206
LTC6902CMS#TRPBF
Analog Devices · Timers / Clock Oscillators · MSOP-10
LTC6902CMS#TRPBF from Analog Devices, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply pin; the operating supply range is 2.7V to 5.5V, and the absolute maximum supply is 6V. |
| 2 | DIV | input | Programmable divider select: GND sets N=1, open sets N=10, and V+ sets N=100. |
| 3 | PH | input | Multiphase mode select: GND gives 2-phase (M=1), open gives 3-phase (M=3), and V+ gives 4-phase (M=4). |
| 4 | OUT1 | output | CMOS clock output 1 with an ON resistance typically less than 100Ω, driving up to V+ levels. |
| 5 | OUT2 | output | CMOS clock output 2 with an ON resistance typically less than 100Ω, driving up to V+ levels. |
| 6 | OUT3 | output | CMOS clock output 3 with an ON resistance typically less than 100Ω, driving up to V+ levels. |
| 7 | OUT4 | output | CMOS clock output 4 with an ON resistance typically less than 100Ω, driving up to V+ levels. |
| 8 | GND | power_in | Ground reference for the device; all pin voltages are referred to GND, with a limit of -0.3V to (V+ + 0.3V). |
| 9 | MOD | input | Spread-spectrum modulation set pin: a resistor RMOD from MOD to V+ sets the spreading percentage, and grounding MOD disables SSFM. |
| 10 | SET | passive | Frequency-setting pin: a resistor RSET from SET to V+ sets the oscillator frequency, with an RSET range of 10kΩ to 2MΩ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-10 |
| Category | RTC/Clock Chip |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy (5kHz ≤ fOUT ≤ 10MHz) | ∆fOUT | -1.5 | 0.5 | 1.5 | % | V+ = 5V; 5kHz ≤ fOUT ≤ 10MHz | 2 |
| Frequency Accuracy (1kHz ≤ fOUT ≤ 5kHz) | ∆fOUT | -2 | 2 | % | V+ = 5V; 1kHz ≤ fOUT ≤ 5kHz | 2 | |
| Frequency Accuracy (10MHz ≤ fOUT ≤ 20MHz) | ∆fOUT | -4 | 3 | 4 | % | V+ = 5V; 10MHz ≤ fOUT ≤ 20MHz | 2 |
| Frequency Accuracy, LTC6902C (5kHz ≤ fOUT ≤ 10MHz) | ∆fOUT | -2 | 2 | % | V+ = 5V; 5kHz ≤ fOUT ≤ 10MHz, LTC6902C | 2 | |
| Frequency Accuracy (5kHz ≤ fOUT ≤ 10MHz), 2.7V | ∆fOUT | -1.5 | 0.5 | 1.5 | % | V+ = 2.7V; 5kHz ≤ fOUT ≤ 10MHz | 2 |
| Frequency Accuracy (1kHz ≤ fOUT ≤ 5kHz), 2.7V | ∆fOUT | -2 | 2 | % | V+ = 2.7V; 1kHz ≤ fOUT ≤ 5kHz | 2 | |
| Frequency Accuracy, LTC6902C (5kHz ≤ fOUT ≤ 10MHz), 2.7V | ∆fOUT | -2 | 2 | % | V+ = 2.7V; 5kHz ≤ fOUT ≤ 10MHz, LTC6902C | 2 | |
| RSET Frequency Setting Resistor Range | RSET | 20 | 400 | kΩ | ∆fOUT < 1.5%, V+ = 5V | 2 | |
| RSET Frequency Setting Resistor Range, 2.7V | RSET | 20 | 400 | kΩ | ∆fOUT < 1.5%, V+ = 2.7V | 2 | |
| Frequency Drift Over Temperature | ∆fOUT/∆T | -0.004 | 0.004 | %/°C | RSET = 63.2k | 2 | |
| Frequency Drift Over Supply | ∆fOUT/∆V | 0.04 | 0.12 | %/V | V+ = 2.7V to 5V, RSET = 63.2k | 2 | |
| Timing Jitter (N = 100) | 0.1 | % | 20k ≤ RSET ≤ 400k, Pin 2 = V+ (N = 100) | 2 | |||
| Timing Jitter (N = 10) | 0.2 | % | 20k ≤ RSET ≤ 400k, Pin 2 = Open (N = 10) | 2 | |||
| Timing Jitter (N = 1) | 0.6 | % | 20k ≤ RSET ≤ 400k, Pin 2 = 0V (N = 1) | 2 | |||
| Duty Cycle, 2-Phase (M = 1) | 49 | 50 | 51 | % | Pin 2 = V+ or Open (N = 100 or 10); Pin 3 = 0V (2-Phase, M = 1) | 2 | |
| Duty Cycle, 3-Phase (M = 3) | 32.3 | 33.3 | 34.3 | % | Pin 2 = V+ or Open (N = 100 or 10); Pin 3 = Open (3-Phase, M = 3) | 2 | |
| Duty Cycle, 4-Phase (M = 4) | 49 | 50 | 51 | % | Pin 2 = V+ or Open (N = 100 or 10); Pin 3 = V+ (4-Phase, M = 4) | 2 | |
| Duty Cycle, 2-Phase (M = 1), N = 1 | 45 | 50 | 55 | % | Pin 2 = 0V (N = 1); Pin 3 = 0V (2-Phase, M = 1) | 2 | |
| Duty Cycle, 3-Phase (M = 3), N = 1 | 32.3 | 33.3 | 34.3 | % | Pin 2 = 0V (N = 1); Pin 3 = Open (3-Phase, M = 3) | 2 | |
| V+ Operating Supply Range | V+ | 2.7 | 5.5 | V | 3 | ||
| Power Supply Current | IS | 0.35 | 0.55 | mA | RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), fOUT = 5kHz; V+ = 5V | 3 | |
| Power Supply Current, 2.7V | IS | 0.32 | 0.5 | mA | RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), fOUT = 5kHz; V+ = 2.7V | 3 | |
| Power Supply Current (N = 1, 10MHz) | IS | 2.35 | 3.5 | mA | RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), fOUT = 10MHz; V+ = 5V | 3 | |
| Power Supply Current (N = 1, 10MHz), 2.7V | IS | 1.4 | 1.8 | mA | RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), fOUT = 10MHz; V+ = 2.7V | 3 | |
| Power Supply Current (RMOD = 800k) | IS | 0.45 | 0.63 | mA | RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), RMOD = 800k; V+ = 5V | 3 | |
| Power Supply Current (RMOD = 800k), 2.7V | IS | 0.34 | 0.5 | mA | RSET = 400k, RL = ∞, Pin 2 = V+ (N = 100), RMOD = 800k; V+ = 2.7V | 3 | |
| Power Supply Current (RMOD = 40k) | IS | 2.5 | 3.6 | mA | RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), RMOD = 40k; V+ = 5V | 3 | |
| Power Supply Current (RMOD = 40k), 2.7V | IS | 1.4 | 1.9 | mA | RSET = 20k, RL = ∞, Pin 2 = 0V (N = 1), RMOD = 40k; V+ = 2.7V | 3 | |
| Low Level DIV Input Voltage | VIL_DIV | 0.4 | V | 3 | |||
| DIV Input Current (source) | IDIV | 2 | 4 | µA | Pin 2 = V+, V+ = 5V | 3 | |
| DIV Input Current (sink) | IDIV | -4 | -2 | µA | Pin 2 = 0V, V+ = 5V | 3 | |
| PH Input Current (source) | IPH | 2 | 4 | µA | Pin 3 = V+, V+ = 5V | 3 | |
| PH Input Current (sink) | IPH | -4 | -2 | µA | Pin 3 = 0V, V+ = 5V | 3 | |
| Low Level PH Input Voltage | VIL_PH | 0.4 | V | 3 | |||
| High Level Output Voltage (OUT1-OUT4) | VOH | 4.75 | 4.9 | V | V+ = 5V, IOH = -1mA | 3 | |
| High Level Output Voltage (OUT1-OUT4) | VOH | 4.4 | 4.7 | V | V+ = 5V, IOH = -4mA | 3 | |
| High Level Output Voltage (OUT1-OUT4) | VOH | 2.35 | 2.6 | V | V+ = 2.7V, IOH = -1mA | 3 | |
| High Level Output Voltage (OUT1-OUT4) | VOH | 1.85 | 2.2 | V | V+ = 2.7V, IOH = -4mA | 3 | |
| Low Level Output Voltage (OUT1-OUT4) | VOL | 0.05 | 0.15 | V | V+ = 5V, IOL = 1mA | 3 | |
| Low Level Output Voltage (OUT1-OUT4) | VOL | 0.2 | 0.4 | V | V+ = 5V, IOL = 4mA | 3 | |
| Low Level Output Voltage (OUT1-OUT4) | VOL | 0.1 | 0.3 | V | V+ = 2.7V, IOL = 1mA | 3 | |
| Low Level Output Voltage (OUT1-OUT4) | VOL | 0.4 | 0.7 | V | V+ = 2.7V, IOL = 4mA | 3 | |
| Output Rise Time | tr | 14 | ns | V+ = 5V; Pin 2 = V+ or Open (N = 100 or N = 10) | 3 | ||
| Output Rise Time | tr | 7 | ns | V+ = 5V; Pin 2 = 0V (N = 1) | 3 | ||
| Output Rise Time, 2.7V | tr | 19 | ns | V+ = 2.7V; Pin 2 = V+ or Open (N = 100 or N = 10) | 3 | ||
| Output Rise Time, 2.7V | tr | 11 | ns | V+ = 2.7V; Pin 2 = 0V (N = 1) | 3 | ||
| Output Fall Time | tf | 13 | ns | V+ = 5V; Pin 2 = V+ or Open (N = 100 or N = 10) | 3 | ||
| Output Fall Time | tf | 6 | ns | V+ = 5V; Pin 2 = 0V (N = 1) | 3 | ||
| Output Fall Time, 2.7V | tf | 19 | ns | V+ = 2.7V; Pin 2 = V+ or Open (N = 100 or N = 10) | 3 | ||
| Output Fall Time, 2.7V | tf | 10 | ns | V+ = 2.7V; Pin 2 = 0V (N = 1) | 3 | ||
| Spread Spectrum Modulation Spreading Percentage (downspread) | 35 | 40 | 45 | % | V+ = 5V, N = 10, RSET = 20k, RMOD = 10k | 3 | |
| Spread Spectrum Modulation Spreading Percentage (downspread) | 7.5 | 10 | 12.5 | % | V+ = 5V, N = 10, RSET = 20k, RMOD = 40k | 3 | |
| Spread Spectrum Modulation Spreading Percentage (downspread), 2.7V | 35 | 40 | 45 | % | V+ = 2.7V, N = 10, RSET = 20k, RMOD = 10k | 3 | |
| Spread Spectrum Modulation Spreading Percentage (downspread), 2.7V | 7.5 | 10 | 12.5 | % | V+ = 2.7V, N = 10, RSET = 20k, RMOD = 40k | 3 | |
| Supply Voltage (V+) to GND | V+ | -0.3 | 6 | V | 2 | ||
| Voltage On Any Pin (referred to GND) | -0.3 | V | Referred to GND; maximum printed as (V+ + 0.3V) | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | LTC6902C | 2 | ||
| Thermal Resistance, Junction to Ambient (MS package) | θJA | 250 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LTC6902CMS#TRPBF - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
ltc6902cms-trpbf-etched.step/ltc6902cms-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6902cms-trpbf.step/ltc6902cms-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
e4b39fe7ae1e50d9, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).