Generated by kicad-footprint-generator · KiCad file format 20260206
LTC6900CS5#TRMPBF
Analog Devices · Timers / Clock Oscillators · TSOT-23-5
LTC6900CS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Voltage supply (2.7V ≤ V+ ≤ 5.5V); must be kept free from noise and ripple and bypassed directly to a ground plane with a 0.1μF capacitor. |
| 2 | GND | power_in | Ground; should be tied to a ground plane for best performance. |
| 3 | SET | passive | Frequency-setting resistor input; the RSET resistor (10kΩ to 2MΩ) connects between this pin and V+, the pin is held about 1.1V below V+, and capacitance on it should be kept below 10pF. |
| 4 | DIV | input | Three-state divider-setting input: GND selects ÷1, floating selects ÷10, V+ selects ÷100; driving it high requires sourcing about 2μA and driving it low requires sinking 2μA. |
| 5 | OUT | output | Rail-to-rail CMOS oscillator output that can drive 5kΩ and/or 10pF loads, with current into/out of the pin limited to 50mA to avoid latchup from transients. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | RTC/Clock Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy 5kHz≤f≤10MHz | Δf | -1.5 | 0.5 | 1.5 | % | V+ = 5V, 5kHz ≤ f ≤ 10MHz, TA = 25°C (typ printed ±0.5) | 2 |
| Frequency Accuracy 5kHz≤f≤10MHz LTC6900C | Δf | -2 | 2 | % | V+ = 5V, 5kHz ≤ f ≤ 10MHz, LTC6900C, full temperature range | 2 | |
| Frequency-Setting Resistor Range | RSET | 20 | 400 | kΩ | /Δf/ < 1.5%, V+ = 5V or 3V | 2 | |
| Frequency Drift Over Supply | Δf/ΔV | 0.04 | 0.1 | %/V | V+ = 3V to 5V, RSET = 63.2k | 2 | |
| Duty Cycle (÷100 or ÷10) | 49 | 50 | 51 | % | Pin 4 = V+ or Open | 2 | |
| Duty Cycle (÷1) | 45 | 50 | 55 | % | Pin 4 = 0V (DIV by 1), RSET = 20k to 400k | 2 | |
| Operating Supply Range | V+ | 2.7 | 5.5 | V | 3 | ||
| Power Supply Current | IS | 0.32 | 0.42 | mA | RSET = 400k, Pin 4 = V+, RL = ∞, V+ = 5V, fOSC = 5kHz | 3 | |
| Power Supply Current | IS | 0.29 | 0.38 | mA | RSET = 400k, Pin 4 = V+, RL = ∞, V+ = 3V, fOSC = 5kHz | 3 | |
| Power Supply Current | IS | 0.92 | 1.2 | mA | RSET = 20k, Pin 4 = 0V, RL = ∞, V+ = 5V, fOSC = 10MHz | 3 | |
| Power Supply Current | IS | 0.68 | 0.86 | mA | RSET = 20k, Pin 4 = 0V, RL = ∞, V+ = 3V, fOSC = 10MHz | 3 | |
| Low Level DIV Input Voltage | VIL | 0.5 | V | 3 | |||
| DIV Input Current | IDIV | -4 | -2 | μA | Pin 4 = V+, V+ = 5V | 3 | |
| DIV Input Current | IDIV | 2 | 4 | μA | Pin 4 = 0V, V+ = 5V | 3 | |
| High Level Output Voltage | VOH | 4.8 | 4.95 | V | V+ = 5V, IOH = -1mA | 3 | |
| High Level Output Voltage | VOH | 4.5 | 4.8 | V | V+ = 5V, IOH = -4mA | 3 | |
| High Level Output Voltage | VOH | 2.7 | 2.9 | V | V+ = 3V, IOH = -1mA | 3 | |
| High Level Output Voltage | VOH | 2.2 | 2.6 | V | V+ = 3V, IOH = -4mA | 3 | |
| Low Level Output Voltage | VOL | 0.05 | 0.15 | V | V+ = 5V, IOL = 1mA | 3 | |
| Low Level Output Voltage | VOL | 0.2 | 0.4 | V | V+ = 5V, IOL = 4mA | 3 | |
| Low Level Output Voltage | VOL | 0.1 | 0.3 | V | V+ = 3V, IOL = 1mA | 3 | |
| Low Level Output Voltage | VOL | 0.4 | 0.7 | V | V+ = 3V, IOL = 4mA | 3 | |
| Supply Voltage | V+ | -0.3 | 6 | V | V+ to GND | 2 | |
| DIV Voltage | -0.3 | V | DIV to GND; upper limit printed as V+ + 0.3V | 2 | |||
| SET Voltage | -0.3 | V | SET to GND; upper limit printed as V+ + 0.3V | 2 | |||
| Operating Temperature Range LTC6900C | -40 | 85 | °C | Note 8 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance Junction-Ambient | θJA | 256 | °C/W | 5-lead TSOT-23 | 2 | ||
| Frequency Drift Overtemperature | Δf/ΔT | 0.004 | %/°C | RSET = 63.2k (printed ±0.004) | 2 | ||
| Timing Jitter | 0.1 | % | Pin 4 = V+, 20k ≤ RSET ≤ 400k | 2 | |||
| Timing Jitter | 0.2 | % | Pin 4 = Open, 20k ≤ RSET ≤ 400k | 2 | |||
| Timing Jitter | 0.6 | % | Pin 4 = 0V, 20k ≤ RSET ≤ 400k | 2 | |||
| Long-Term Stability of Output Frequency | 300 | ppm/√kHr | 2 | ||||
| OUT Rise Time | tr | 14 | ns | V+ = 5V, Pin 4 = V+ or Floating, RL = ∞ | 3 | ||
| OUT Rise Time | tr | 7 | ns | V+ = 5V, Pin 4 = 0V, RL = ∞ | 3 | ||
| OUT Fall Time | tf | 13 | ns | V+ = 5V, Pin 4 = V+ or Floating, RL = ∞ | 3 | ||
| OUT Fall Time | tf | 6 | ns | V+ = 5V, Pin 4 = 0V, RL = ∞ | 3 |
CAD (KiCad official)
- Symbol:
LTC6900CS5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ltc6900cs5-trmpbf-etched.step/ltc6900cs5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6900cs5-trmpbf.step/ltc6900cs5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
9aa2fb09f6933a8a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).