Generated by kicad-footprint-generator · KiCad file format 20260206
LTC6804HG-1#3ZZPBF
Analog Devices · Pre-ordered Chips · SSOP-48-208mil
LTC6804HG-1#3ZZPBF from Analog Devices, in a SSOP-48-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply pin that must be at least the top cell voltage for accurate measurement, with TME specifications met from 11V to 55V. |
| 2 | C12 | input | Cell 12 input, with absolute maximum input voltage of 75V relative to V-. |
| 3 | S12 | passive | Balance input/output for cell 12, driving an internal N-MOSFET to C11 for discharging. |
| 4 | C11 | input | Cell 11 input, with absolute maximum input voltage of MIN(8 x 11, 75V) relative to V-. |
| 5 | S11 | passive | Balance input/output for cell 11, driving an internal N-MOSFET to C10 for discharging. |
| 6 | C10 | input | Cell 10 input, with absolute maximum input voltage of MIN(8 x 10, 75V) relative to V-. |
| 7 | S10 | passive | Balance input/output for cell 10, driving an internal N-MOSFET to C9 for discharging. |
| 8 | C9 | input | Cell 9 input, with absolute maximum input voltage of MIN(8 x 9, 75V) relative to V-. |
| 9 | S9 | passive | Balance input/output for cell 9, driving an internal N-MOSFET to C8 for discharging. |
| 10 | C8 | input | Cell 8 input, with absolute maximum input voltage of MIN(8 x 8, 75V) relative to V-. |
| 11 | S8 | passive | Balance input/output for cell 8, driving an internal N-MOSFET to C7 for discharging. |
| 12 | C7 | input | Cell 7 input, with absolute maximum input voltage of MIN(8 x 7, 75V) relative to V-. |
| 13 | S7 | passive | Balance input/output for cell 7, driving an internal N-MOSFET to C6 for discharging. |
| 14 | C6 | input | Cell 6 input, with absolute maximum input voltage of MIN(8 x 6, 75V) relative to V-. |
| 15 | S6 | passive | Balance input/output for cell 6, driving an internal N-MOSFET to C5 for discharging. |
| 16 | C5 | input | Cell 5 input, with absolute maximum input voltage of MIN(8 x 5, 75V) relative to V-. |
| 17 | S5 | passive | Balance input/output for cell 5, driving an internal N-MOSFET to C4 for discharging. |
| 18 | C4 | input | Cell 4 input, with absolute maximum input voltage of MIN(8 x 4, 75V) relative to V-. |
| 19 | S4 | passive | Balance input/output for cell 4, driving an internal N-MOSFET to C3 for discharging. |
| 20 | C3 | input | Cell 3 input, with absolute maximum input voltage of MIN(8 x 3, 75V) relative to V-. |
| 21 | S3 | passive | Balance input/output for cell 3, driving an internal N-MOSFET to C2 for discharging. |
| 22 | C2 | input | Cell 2 input, with absolute maximum input voltage of MIN(8 x 2, 75V) relative to V-. |
| 23 | S2 | passive | Balance input/output for cell 2, driving an internal N-MOSFET to C1 for discharging. |
| 24 | C1 | input | Cell 1 input, with absolute maximum input voltage of MIN(8 x 1, 75V) relative to V-. |
| 25 | S1 | passive | Balance input/output for cell 1, driving an internal N-MOSFET to C0 for discharging. |
| 26 | C0 | input | Cell 0 input, which must stay within -0.3V to 0.3V relative to V-. |
| 27 | GPIO1 | bidirectional | General purpose I/O that can be a digital input or output, or an analog input measured from V- to 5V. |
| 28 | GPIO2 | bidirectional | General purpose I/O that can be a digital input or output, or an analog input measured from V- to 5V. |
| 29 | GPIO3 | bidirectional | General purpose I/O that can be a digital input or output, or an analog input measured from V- to 5V, and can serve as an I2C or SPI port. |
| 30 | V- | power_in | Negative supply pin that must be shorted to the other V- pin external to the IC. |
| 31 | V- | power_in | Negative supply pin that must be connected to V-. |
| 32 | GPIO4 | bidirectional | General purpose I/O that can be a digital input or output, or an analog input measured from V- to 5V, and can serve as an I2C or SPI port. |
| 33 | GPIO5 | bidirectional | General purpose I/O that can be a digital input or output, or an analog input measured from V- to 5V, and can serve as an I2C or SPI port. |
| 34 | VREF2 | power_out | Buffered 2nd reference voltage for driving multiple 10k thermistors, bypassed with an external 1uF capacitor. |
| 35 | VREF1 | power_out | ADC reference voltage, bypassed with an external 1uF capacitor, with no DC loads allowed. |
| 36 | SWTEN | input | Software timer enable input, which is connected to VREG to enable the software timer. |
| 37 | VREG | power_in | 5V regulator input that requires 5V +/-0.5V and should be bypassed with an external 1uF capacitor. |
| 38 | DRIVE | output | Drives the base of an external NPN to form a regulator, providing a 5.6V output when active. |
| 39 | WDT | output | Open-drain NMOS watchdog timer output that goes high impedance when the watchdog resets the device after 2 seconds without a wake-up signal. |
| 40 | ISOMD | input | Serial interface mode select: tying to VREG configures pins 41 to 44 for 2-wire isoSPI, and tying to V- configures 4-wire SPI. |
| 41 | CSB (IMA) | input | Active-low SPI chip select when ISOMD is tied to V-, or isoSPI port A minus line IMA when ISOMD is tied to VREG. |
| 42 | SCK (IPA) | input | SPI serial clock input when ISOMD is tied to V-, or isoSPI port A plus line IPA when ISOMD is tied to VREG. |
| 43 | SDI (NC) | input | SPI serial data input when ISOMD is tied to V-, and not connected when ISOMD is tied to VREG. |
| 44 | SDO (NC) | output | Open-drain SPI serial data output requiring a 5k pull-up resistor when ISOMD is tied to V-, and not connected when ISOMD is tied to VREG. |
| 45 | IBIAS | passive | isoSPI interface current bias, tied to V- through a resistor divider that holds 2V when the interface is enabled. |
| 46 | ICMP | input | isoSPI comparator threshold set, tied to the resistor divider between IBIAS and V- so the receiver threshold is half the ICMP voltage. |
| 47 | IMB | bidirectional | isoSPI port B minus line, a differential pair with IPB for the daisy-chain link. |
| 48 | IPB | bidirectional | isoSPI port B plus line, a differential pair with IMB for the daisy-chain link. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-48-208mil |
| Category | Interface ICs |
| Pins | 48 |
CAD (KiCad official)
- Symbol:
LTC6804HG-1#3ZZPBF - Footprint:
Package_SO:SSOP-48_5.3x12.8mm_P0.5mm - 3D model: SSOP-48-208mil, generated on the KiCad land (body 5.3 x 12.8 mm, terminals on the pads, 2.0 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ltc6804hg-1-3zzpbf-etched.step/ltc6804hg-1-3zzpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6804hg-1-3zzpbf.step/ltc6804hg-1-3zzpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (78 pp, sha256
2b9143eca2ec13f9, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).