# LTC6752ISC6-1#TRMPBF

**Analog Devices** · Comparators · SC-70-6

LTC6752ISC6-1#TRMPBF from Analog Devices, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q | output | Comparator output is driven high when +IN > -IN and driven low when +IN < -IN. |
| 2 | VEE | power_in | Negative power supply, normally tied to ground, and may be tied to another voltage as long as the total supply constraints relative to VCC are maintained. |
| 3 | +IN | input | Positive comparator input; the voltage range of this pin can go from VEE to VCC. |
| 4 | -IN | input | Negative comparator input; the voltage range of this pin can go from VEE to VCC. |
| 5 | LE/HYST | input | Adjusts hysteresis and latches the output state when the pin voltage is taken within 300mV above VEE; leaving the pin unconnected gives a typical hysteresis of 5mV. |
| 6 | VCC | power_in | Positive supply voltage for the LTC6752/LTC6752-1 total supply, with VCC to VEE specified from 2.45V to 3.5V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC - VEE Supply Voltage (Total Supply) | VCC - VEE | 2.45 |  | 3.5 | V | LTC6752/LTC6752-1 (Total Supply); l | 3 |
| Input Offset Voltage | VOS | -8.5 |  | 8.5 | mV | l; VCC = VDD = 2.5V | 3 |
| Input Offset Voltage | VOS | -5.5 |  | 5.5 | mV | TA = 25°C; VCC = VDD = 2.5V | 3 |
| Input Offset Current | IOS | -0.75 |  | 0.75 | µA | l | 3 |
| VCC Supply Current, Device On (LTC6752/LTC6752-1) | IVCC | 4.5 | 5 | 5.9 | mA | LTC6752/LTC6752-1; VCC = VDD = 2.5V; l | 4 |
| Total Supply Current, Device On (LTC6752/LTC6752-1) | ITOTAL | 4.5 | 5 | 5.9 | mA | LTC6752/LTC6752-1/LTC6752-2/LTC6752-4; VCC = VDD = 2.5V; l | 4 |
| Propagation Delay | tPD |  | 2.9 | 5 | ns | VOVERDRIVE = 50mV; TA = 25°C | 4 |
| Propagation Delay | tPD |  |  | 5.5 | ns | VOVERDRIVE = 50mV; l | 4 |
| LE/HYST Pin Voltage Open Circuit | VLE/HYST | 1.05 | 1.25 | 1.45 | V | Open circuit; l | 5 |
| Resistance Looking Into LE/HYST | RHYST | 15 | 20 | 25 | kΩ | LE/HYST Pin Voltage < Open Circuit Value; l | 5 |
| LE/HYST Pin Latch Pin Current High | IIH_LE | 30 |  | 72 | µA | VLE/HYST = 1.7V; l | 5 |
| LE/HYST Pin Latch Pin Current Low | IIL_LE | -70 |  | -47 | µA | VLE/HYST = 0.3V; l | 5 |
| Input Current (+IN, -IN, SHDN, LE/HYST) | IIN | -10 |  | 10 | mA | Note 2 | 2 |
| Output Current (Q, Q) | IOUT | -50 |  | 50 | mA | Note 3 | 2 |
| Specified Temperature Range LTC6752I |  | -40 |  | 85 | °C | LTC6752I | 2 |
| Storage Temperature Range |  | -65 |  | 125 | °C |  | 2 |
| Maximum Junction Temperature | TJMAX |  |  | 150 | °C | Note 3 | 2 |
| Lead Temperature Soldering |  |  |  | 300 | °C | 10s | 2 |
| Rise/Fall Time | tR, tF |  | 1.2 |  | ns | 10% to 90% | 4 |
| Toggle Rate | TR |  | 280 |  | MHz | 100mVP-P input, LTC6752/LTC6752-1/LTC6752-2/LTC6752-4 (Note 11) | 4 |
| Input Capacitance | CIN |  | 1.1 |  | pF |  | 3 |
| Differential Mode Resistance | RDM |  | 57 |  | kΩ |  | 3 |
| Common Mode Resistance | RCM |  | 6.4 |  | MΩ |  | 3 |
| Input Hysteresis Voltage | VHYST |  | 5 |  | mV | LE/HYST Pin Floating | 3 |
| Input Offset Voltage Drift | TCVOS |  | 18 |  | µV/°C | l | 3 |
| Thermal Resistance, Junction to Ambient (SC6 package) | θJA |  | 270 |  | °C/W | 6-lead plastic SC70 package; Note 3 | 2 |

## CAD (KiCad official)

- Symbol: `LTC6752ISC6-1#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:SOT-363_SC-70-6`
- 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files: `ltc6752isc6-1-trmpbf-etched.step` / `ltc6752isc6-1-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc6752isc6-1-trmpbf.step` / `ltc6752isc6-1-trmpbf.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6752fc.pdf) (30 pp, sha256 `d0e3d938d1b220ae`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ltc6752isc6-1-trmpbf-datasheet.pdf)