main
Ray
Publish 0.1.0
bcf7aec
LTC6655BHMS8-5#PBF
Analog Devices · Voltage Reference · MSOP-8
LTC6655BHMS8-5#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Active-low shutdown input powers the device down to <20µA, is pulled up internally to normal operation if left open, and should be tied high externally for best performance. |
| 2 | VIN | power_in | Power supply input that should be bypassed with a 0.1µF or larger capacitor to GND, with 3V < VIN ≤ 13.2V specified for operation. |
| 3 | GND | power_in | Internal function ground pin that must be grounded. |
| 4 | GND | power_in | Main device ground that must be connected to a noise-free ground plane. |
| 5 | GND | power_in | Internal function ground pin that must be grounded. |
| 6 | VOUT_S | passive | Output sense pin to be connected at the load with a wide trace; it sinks 2mA so output error is RTRACE × 2mA, and for load currents below 100µA it should be tied directly to VOUT_F. |
| 7 | VOUT_F | power_out | Output force pin that sources and sinks load current and requires an output capacitor of 2.7µF to 100µF. |
| 8 | GND | power_in | Internal function ground pin that must be grounded. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | -0.025 | 0.025 | % | LTC6655B grade | 5 | ||
| Output Voltage Temperature Coefficient | 1 | 2 | ppm/°C | l: full operating temperature range, LTC6655B | 5 | ||
| Line Regulation | 5 | 25 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 13.2V, SHDN = 2V | 5 | ||
| Line Regulation | 40 | ppm/V | l: VOUT + 0.5V ≤ VIN ≤ 13.2V, SHDN = 2V | 5 | |||
| Load Regulation (sourcing) | 3 | 15 | ppm/mA | ISOURCE = 5mA, LTC6655MS8, l: full operating temperature range | 5 | ||
| Load Regulation (sinking) | 10 | 30 | ppm/mA | ISINK = 5mA, LTC6655MS8, l: full operating temperature range | 5 | ||
| Operating Voltage | 13.2 | V | ISOURCE = ±5mA, VOUT Error ≤ 0.1%, l; min printed as VOUT + 0.5 V | 5 | |||
| Shutdown Pin (SHDN) Logic High Input Voltage | 2 | V | l | 5 | |||
| Shutdown Pin (SHDN) Logic Low Input Voltage | 0.8 | V | l | 5 | |||
| Logic High Input Current | 12 | µA | SHDN = 2V, l | 5 | |||
| Logic Low Input Current | 15 | µA | SHDN = 0.8V, l | 5 | |||
| Supply Current | 5 | 7 | mA | No Load | 5 | ||
| Supply Current | 7.5 | mA | No Load, l | 5 | |||
| Shutdown Current | 20 | µA | SHDN tied to GND, l | 5 | |||
| Output Short-Circuit Current | 20 | mA | Short VOUT to GND | 5 | |||
| Output Voltage Noise 0.1Hz to 10Hz | 0.25 | ppmP-P | 0.1Hz ≤ f ≤ 10Hz, LTC6655 | 6 | |||
| Output Voltage Noise 10Hz to 1kHz | 0.67 | ppmRMS | 10Hz ≤ f ≤ 1kHz, LTC6655 | 6 | |||
| Turn-On Time | 400 | µs | 0.1% Settling, COUT = 2.7µF | 6 | |||
| Long-Term Drift of Output Voltage | 60 | ppm/√kHr | LTC6655MS8 | 6 | |||
| Hysteresis | 20 | ppm | LTC6655MS8, ∆T = 0°C to 70°C | 6 | |||
| Hysteresis | 30 | ppm | LTC6655MS8, ∆T = -40°C to 85°C | 6 | |||
| Hysteresis | 60 | ppm | LTC6655MS8, ∆T = -40°C to 125°C | 6 | |||
| Input Voltage VIN | VIN | -0.3 | 13.2 | V | VIN to GND | 2 | |
| Shutdown Input Voltage SHDN | SHDN | -0.3 | V | SHDN to GND; max (VIN + 0.3V) | 2 | ||
| Output Voltage VOUT_F | VOUT_F | -0.3 | V | max (VIN + 0.3V) | 2 | ||
| Output Voltage VOUT_S | VOUT_S | -0.3 | 6 | V | 2 | ||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 300 | °C/W | MS8 package | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | Plastic mould compounds absorb water. With changes in | 16 |
CAD (KiCad official)
- Symbol:
LTC6655BHMS8-5#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc6655bhms8-5-etched.step/ltc6655bhms8-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6655bhms8-5.step/ltc6655bhms8-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (30 pp, sha256
f4788bedb0735838, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC6655BHMS8-5#PBF
**Analog Devices** · Voltage Reference · MSOP-8
LTC6655BHMS8-5#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Active-low shutdown input powers the device down to <20µA, is pulled up internally to normal operation if left open, and should be tied high externally for best performance. |
| 2 | VIN | power_in | Power supply input that should be bypassed with a 0.1µF or larger capacitor to GND, with 3V < VIN ≤ 13.2V specified for operation. |
| 3 | GND | power_in | Internal function ground pin that must be grounded. |
| 4 | GND | power_in | Main device ground that must be connected to a noise-free ground plane. |
| 5 | GND | power_in | Internal function ground pin that must be grounded. |
| 6 | VOUT_S | passive | Output sense pin to be connected at the load with a wide trace; it sinks 2mA so output error is RTRACE × 2mA, and for load currents below 100µA it should be tied directly to VOUT_F. |
| 7 | VOUT_F | power_out | Output force pin that sources and sinks load current and requires an output capacitor of 2.7µF to 100µF. |
| 8 | GND | power_in | Internal function ground pin that must be grounded. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | | -0.025 | | 0.025 | % | LTC6655B grade | 5 |
| Output Voltage Temperature Coefficient | | | 1 | 2 | ppm/°C | l: full operating temperature range, LTC6655B | 5 |
| Line Regulation | | | 5 | 25 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 13.2V, SHDN = 2V | 5 |
| Line Regulation | | | | 40 | ppm/V | l: VOUT + 0.5V ≤ VIN ≤ 13.2V, SHDN = 2V | 5 |
| Load Regulation (sourcing) | | | 3 | 15 | ppm/mA | ISOURCE = 5mA, LTC6655MS8, l: full operating temperature range | 5 |
| Load Regulation (sinking) | | | 10 | 30 | ppm/mA | ISINK = 5mA, LTC6655MS8, l: full operating temperature range | 5 |
| Operating Voltage | | | | 13.2 | V | ISOURCE = ±5mA, VOUT Error ≤ 0.1%, l; min printed as VOUT + 0.5 V | 5 |
| Shutdown Pin (SHDN) Logic High Input Voltage | | 2 | | | V | l | 5 |
| Shutdown Pin (SHDN) Logic Low Input Voltage | | | | 0.8 | V | l | 5 |
| Logic High Input Current | | | | 12 | µA | SHDN = 2V, l | 5 |
| Logic Low Input Current | | | | 15 | µA | SHDN = 0.8V, l | 5 |
| Supply Current | | | 5 | 7 | mA | No Load | 5 |
| Supply Current | | | | 7.5 | mA | No Load, l | 5 |
| Shutdown Current | | | | 20 | µA | SHDN tied to GND, l | 5 |
| Output Short-Circuit Current | | | 20 | | mA | Short VOUT to GND | 5 |
| Output Voltage Noise 0.1Hz to 10Hz | | | 0.25 | | ppmP-P | 0.1Hz ≤ f ≤ 10Hz, LTC6655 | 6 |
| Output Voltage Noise 10Hz to 1kHz | | | 0.67 | | ppmRMS | 10Hz ≤ f ≤ 1kHz, LTC6655 | 6 |
| Turn-On Time | | | 400 | | µs | 0.1% Settling, COUT = 2.7µF | 6 |
| Long-Term Drift of Output Voltage | | | 60 | | ppm/√kHr | LTC6655MS8 | 6 |
| Hysteresis | | | 20 | | ppm | LTC6655MS8, ∆T = 0°C to 70°C | 6 |
| Hysteresis | | | 30 | | ppm | LTC6655MS8, ∆T = -40°C to 85°C | 6 |
| Hysteresis | | | 60 | | ppm | LTC6655MS8, ∆T = -40°C to 125°C | 6 |
| Input Voltage VIN | VIN | -0.3 | | 13.2 | V | VIN to GND | 2 |
| Shutdown Input Voltage SHDN | SHDN | -0.3 | | | V | SHDN to GND; max (VIN + 0.3V) | 2 |
| Output Voltage VOUT_F | VOUT_F | -0.3 | | | V | max (VIN + 0.3V) | 2 |
| Output Voltage VOUT_S | VOUT_S | -0.3 | | 6 | V | | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering) | | | | 300 | °C | 10 sec | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 300 | | °C/W | MS8 package | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | | Plastic mould compounds absorb water. With changes in | 16 |
## CAD (KiCad official)
- Symbol: `LTC6655BHMS8-5#PBF`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `ltc6655bhms8-5-etched.step` / `ltc6655bhms8-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc6655bhms8-5.step` / `ltc6655bhms8-5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LTC6655-6655LN.pdf) (30 pp, sha256 `f4788bedb0735838`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc6655bhms8-5-datasheet.pdf)