main
Ray
Publish 0.1.0
665c072
LTC6652AHMS8-1.25#PBF
Analog Devices · Voltage References · MSOP-8
LTC6652AHMS8-1.25#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do Not Connect; this pin must be left unconnected. |
| 2 | VIN | power_in | Power supply input with a minimum of VOUT + 300mV or 2.7V (whichever is higher) and a maximum of 13.2V; bypassing with a 0.1µF capacitor to GND improves PSRR. |
| 3 | SHDN | input | Active-low shutdown input that powers the device down to <2µA, and for normal operation it must be tied to VIN (SHDN should be ≥2.0V). |
| 4 | GND | power_in | Device ground and the reference point for the GND* pins (5, 7, 8). |
| 5 | GND | power_in | Internal function pin that must be grounded (connect to device GND, pin 4). |
| 6 | VOUT | power_out | Voltage reference output; an output capacitor is not required, and a 0.1µF to 10µF capacitor can be beneficial for some applications. |
| 7 | GND | power_in | Internal function pin that must be grounded (connect to device GND, pin 4). |
| 8 | GND | power_in | Internal function pin that must be grounded (connect to device GND, pin 4). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LTC6652A accuracy, 1.25V option) | -0.05 | 0.05 | % | 3 | |||
| Output Voltage Temperature Coefficient (LTC6652A) | 2 | 5 | ppm/°C | l: full operating temperature range | 3 | ||
| Line Regulation | 2 | 50 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 13.2V, SHDN = VIN; l: full operating temperature range | 3 | ||
| Load Regulation (sourcing) | 20 | 75 | ppm/mA | ISOURCE = 5mA, LTC6652-1.25; l | 4 | ||
| Load Regulation (sinking) | 80 | 250 | ppm/mA | ISINK = 1mA, LTC6652-1.25; l | 4 | ||
| Minimum Operating Voltage | 2.7 | V | ISOURCE = 5mA, VOUT Error ≤ 0.1%, LTC6652-1.25; l | 4 | |||
| Output Short-Circuit Current (short VOUT to GND) | 16 | mA | Short VOUT to GND | 4 | |||
| Output Short-Circuit Current (short VOUT to VIN) | 16 | mA | Short VOUT to VIN | 4 | |||
| Shutdown Pin (SHDN) Logic High Input Voltage | 2 | V | l | 4 | |||
| Shutdown Pin (SHDN) Logic High Input Current | 0.1 | 1 | µA | l | 4 | ||
| Shutdown Pin (SHDN) Logic Low Input Voltage | 0.8 | V | l | 4 | |||
| Shutdown Pin (SHDN) Logic Low Input Current | 0.1 | 1 | µA | l | 4 | ||
| Supply Current | 350 | 560 | µA | No load; l | 4 | ||
| Shutdown Current | 0.1 | 2 | µA | SHDN tied to GND; l | 4 | ||
| Output Voltage Noise (LTC6652-1.25) | 2.4 | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 | |||
| Output Voltage Noise (10Hz to 1kHz) | 3 | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 | |||
| Turn-On Time | 100 | µs | 0.1% settling, CLOAD = 0 | 4 | |||
| Long-Term Drift of Output Voltage (MS8) | 60 | ppm/√kHr | LTC6652MS8 (MS8 package) | 4 | |||
| Hysteresis (MS8) | 80 | ppm | ΔT = -40°C to 125°C, LTC6652MS8 | 4 | |||
| Hysteresis (MS8) | 75 | ppm | ΔT = -40°C to 85°C, LTC6652MS8 | 4 | |||
| Hysteresis (MS8) | 45 | ppm | ΔT = 0°C to 70°C, LTC6652MS8 | 4 | |||
| Output Source Current (guaranteed, 1.25V option) | 5 | mA | 1.25V and 2.048V versions | 10 | |||
| Output Sink Current (guaranteed, 1.25V option) | 1 | mA | 1.25V and 2.048V versions | 10 | |||
| Input Voltage VIN (supply range) | VIN | 2.7 | 13.2 | V | Minimum is VOUT + 300mV or 2.7V, whichever is higher | 9 | |
| VIN to GND | VIN | -0.3 | 13.2 | V | 2 | ||
| SHDN to GND | SHDN | -0.3 | V | Maximum is VIN + 0.3V | 2 | ||
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | Maximum is VIN + 0.3V | 2 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | Note 2 | 2 | |
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance, junction to ambient (MS8) | θJA | 200 | °C/W | 8-Lead Plastic MSOP (MS8) | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | Plastic mould compounds absorb water. With changes | 14 |
CAD (KiCad official)
- Symbol:
LTC6652AHMS8-1.25#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc6652ahms8-1-25-pbf-etched.step/ltc6652ahms8-1-25-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6652ahms8-1-25-pbf.step/ltc6652ahms8-1-25-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
cb57839f236ed0a6, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC6652AHMS8-1.25#PBF
**Analog Devices** · Voltage References · MSOP-8
LTC6652AHMS8-1.25#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do Not Connect; this pin must be left unconnected. |
| 2 | VIN | power_in | Power supply input with a minimum of VOUT + 300mV or 2.7V (whichever is higher) and a maximum of 13.2V; bypassing with a 0.1µF capacitor to GND improves PSRR. |
| 3 | SHDN | input | Active-low shutdown input that powers the device down to <2µA, and for normal operation it must be tied to VIN (SHDN should be ≥2.0V). |
| 4 | GND | power_in | Device ground and the reference point for the GND* pins (5, 7, 8). |
| 5 | GND | power_in | Internal function pin that must be grounded (connect to device GND, pin 4). |
| 6 | VOUT | power_out | Voltage reference output; an output capacitor is not required, and a 0.1µF to 10µF capacitor can be beneficial for some applications. |
| 7 | GND | power_in | Internal function pin that must be grounded (connect to device GND, pin 4). |
| 8 | GND | power_in | Internal function pin that must be grounded (connect to device GND, pin 4). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LTC6652A accuracy, 1.25V option) | | -0.05 | | 0.05 | % | | 3 |
| Output Voltage Temperature Coefficient (LTC6652A) | | | 2 | 5 | ppm/°C | l: full operating temperature range | 3 |
| Line Regulation | | | 2 | 50 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 13.2V, SHDN = VIN; l: full operating temperature range | 3 |
| Load Regulation (sourcing) | | | 20 | 75 | ppm/mA | ISOURCE = 5mA, LTC6652-1.25; l | 4 |
| Load Regulation (sinking) | | | 80 | 250 | ppm/mA | ISINK = 1mA, LTC6652-1.25; l | 4 |
| Minimum Operating Voltage | | 2.7 | | | V | ISOURCE = 5mA, VOUT Error ≤ 0.1%, LTC6652-1.25; l | 4 |
| Output Short-Circuit Current (short VOUT to GND) | | | 16 | | mA | Short VOUT to GND | 4 |
| Output Short-Circuit Current (short VOUT to VIN) | | | 16 | | mA | Short VOUT to VIN | 4 |
| Shutdown Pin (SHDN) Logic High Input Voltage | | 2 | | | V | l | 4 |
| Shutdown Pin (SHDN) Logic High Input Current | | | 0.1 | 1 | µA | l | 4 |
| Shutdown Pin (SHDN) Logic Low Input Voltage | | | | 0.8 | V | l | 4 |
| Shutdown Pin (SHDN) Logic Low Input Current | | | 0.1 | 1 | µA | l | 4 |
| Supply Current | | | 350 | 560 | µA | No load; l | 4 |
| Shutdown Current | | | 0.1 | 2 | µA | SHDN tied to GND; l | 4 |
| Output Voltage Noise (LTC6652-1.25) | | | 2.4 | | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 |
| Output Voltage Noise (10Hz to 1kHz) | | | 3 | | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 |
| Turn-On Time | | | 100 | | µs | 0.1% settling, CLOAD = 0 | 4 |
| Long-Term Drift of Output Voltage (MS8) | | | 60 | | ppm/√kHr | LTC6652MS8 (MS8 package) | 4 |
| Hysteresis (MS8) | | | 80 | | ppm | ΔT = -40°C to 125°C, LTC6652MS8 | 4 |
| Hysteresis (MS8) | | | 75 | | ppm | ΔT = -40°C to 85°C, LTC6652MS8 | 4 |
| Hysteresis (MS8) | | | 45 | | ppm | ΔT = 0°C to 70°C, LTC6652MS8 | 4 |
| Output Source Current (guaranteed, 1.25V option) | | 5 | | | mA | 1.25V and 2.048V versions | 10 |
| Output Sink Current (guaranteed, 1.25V option) | | 1 | | | mA | 1.25V and 2.048V versions | 10 |
| Input Voltage VIN (supply range) | VIN | 2.7 | | 13.2 | V | Minimum is VOUT + 300mV or 2.7V, whichever is higher | 9 |
| VIN to GND | VIN | -0.3 | | 13.2 | V | | 2 |
| SHDN to GND | SHDN | -0.3 | | | V | Maximum is VIN + 0.3V | 2 |
| Output Voltage (absolute maximum) | VOUT | -0.3 | | | V | Maximum is VIN + 0.3V | 2 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | Note 2 | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Thermal Resistance, junction to ambient (MS8) | θJA | | 200 | | °C/W | 8-Lead Plastic MSOP (MS8) | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | | Plastic mould compounds absorb water. With changes | 14 |
## CAD (KiCad official)
- Symbol: `LTC6652AHMS8-1.25#PBF`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `ltc6652ahms8-1-25-pbf-etched.step` / `ltc6652ahms8-1-25-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc6652ahms8-1-25-pbf.step` / `ltc6652ahms8-1-25-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6652fg.pdf) (20 pp, sha256 `cb57839f236ed0a6`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc6652ahms8-1-25-pbf-datasheet.pdf)