component
LTC6102CMS8#TRPBF
Public Made by Adomby adom
Analog Devices Precision OpAmps, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC6102CMS8#TRPBF
Analog Devices · Precision OpAmps · MSOP-8
LTC6102CMS8#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -INS | input | Amplifier inverting input; when tied to -INF, the internal sense amplifier drives -INS to the same potential as +IN. |
| 2 | -INF | input | Force input that carries the input current from RIN and must be tied to -INS near RIN; RIN from V+ to -INF sets IOUT = VSENSE/RIN. |
| 3 | V- | power_in | Negative supply for the LTC6102 (this pin is EN on the LTC6102-1 only); the datasheet gives the supply range as 4V to 60V (70V absolute maximum) for the LTC6102. |
| 4 | OUT | output | Open-drain current output that sources a current proportional to the sense voltage into an external resistor, equal to the current entering -INF; output current is rated (-1mA, +10mA) in the absolute maximum ratings. |
| 5 | V- | power_in | Negative supply. |
| 6 | VREG | power_out | Internal regulated supply that requires a 0.1µF (or larger) capacitor from VREG to V+ and is not designed to drive external circuits. |
| 7 | V+ | power_in | Positive supply through which the supply current is drawn; the datasheet gives the supply range as 4V to 60V (70V absolute maximum) for the LTC6102. |
| 8 | +IN | input | Amplifier noninverting input that must be tied to the system load end of the sense resistor, has an internal 5k series resistor, and can be held up to 20V below -INS indefinitely or 60V below -INS for up to one second. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | V+ | 4 | 60 | V | 4 | ||
| Input Offset Voltage (Note 3) | VOS | 3 | 10 | µV | VSENSE = 100µV; 6V ≤ V+ ≤ 60V | 4 | |
| Input Offset Voltage (Note 3) | VOS | 5 | 25 | µV | VSENSE = 100µV; V+ = 4V | 4 | |
| Input Offset Voltage (Note 4) | VOS | 3 | 35 | µV | VSENSE = 100µV; 6V ≤ V+ ≤ 60V | 4 | |
| Input Offset Voltage (Note 4) | VOS | 5 | 50 | µV | VSENSE = 100µV; V+ = 4V | 4 | |
| Input Offset Voltage Drift (Note 3) | ΔVOS/ΔT | 25 | 50 | nV/°C | VSENSE = 100µV; LTC6102C, LTC6102I, LTC6102C-1, LTC6102I-1 | 4 | |
| Input Bias Current (Note 5) | IB | 60 | pA | RIN = 40k, VSENSE = 2mV; LTC6102C, LTC6102I, LTC6102C-1, LTC6102I-1 | 4 | ||
| Input Bias Current (Note 5) | IB | 3 | nA | RIN = 40k, VSENSE = 2mV; LTC6102C, LTC6102I, LTC6102C-1, LTC6102I-1 | 4 | ||
| Power Supply Rejection Ratio | PSRR | 130 | 150 | dB | VSENSE = 100µV, V+ = 6V to 60V | 4 | |
| Power Supply Rejection Ratio | PSRR | 120 | 140 | dB | VSENSE = 100µV, V+ = 4V to 60V | 4 | |
| Input Sense Voltage Full Scale (V+, VIN+) | VSENSE(MAX) | 2 | V | Error <1%, RIN = 10k, ROUT = 10k; 6V ≤ V+ ≤ 60V | 4 | ||
| Input Sense Voltage Full Scale (V+, VIN+) | VSENSE(MAX) | 0.8 | V | Error <1%, RIN = 10k, ROUT = 10k; V+ = 4V | 4 | ||
| Maximum Output Voltage (LTC6102) | VOUT | 8 | V | VSENSE = 2mV, ROUT = 100k; 12V ≤ V+ ≤ 60V | 4 | ||
| Maximum Output Voltage (LTC6102) | VOUT | 3 | V | VSENSE = 2mV, ROUT = 100k; V+ = 6V | 4 | ||
| Maximum Output Voltage (LTC6102) | VOUT | 1 | V | VSENSE = 2mV, ROUT = 100k; V+ = 4V | 4 | ||
| Maximum Output Current | IOUT | 1 | mA | 6V ≤ V+ ≤ 60V, RIN = 1k, ROUT = 1k, VSENSE = 1.1V | 4 | ||
| Maximum Output Current | IOUT | 0.5 | mA | V+ = 4V, RIN = 10Ω, ROUT = 1k, VSENSE = 11mV | 4 | ||
| Supply Current | IS | 275 | 400 | µA | V+ = 4V, IOUT = 0, RIN = 10k, ROUT = 100k | 4 | |
| Supply Current (full operating temperature range) | IS | 475 | µA | V+ = 4V, IOUT = 0, RIN = 10k, ROUT = 100k; l = full operating temperature range | 4 | ||
| Supply Current | IS | 290 | 425 | µA | V+ = 6V, IOUT = 0, RIN = 10k, ROUT = 100k | 4 | |
| Supply Current (full operating temperature range) | IS | 500 | µA | V+ = 6V, IOUT = 0, RIN = 10k, ROUT = 100k; l = full operating temperature range | 4 | ||
| Supply Current | IS | 300 | 450 | µA | V+ = 12V, IOUT = 0, RIN = 10k, ROUT = 100k | 4 | |
| Supply Current (full operating temperature range) | IS | 525 | µA | V+ = 12V, IOUT = 0, RIN = 10k, ROUT = 100k; l = full operating temperature range | 4 | ||
| Supply Current | IS | 420 | 575 | µA | V+ = 60V, IOUT = 0, RIN = 10k, ROUT = 100k | 4 | |
| Supply Current (full operating temperature range) | IS | 650 | µA | V+ = 60V, IOUT = 0, RIN = 10k, ROUT = 100k; LTC6102C, LTC6102I, LTC6102C-1, LTC6102I-1 (full operating temperature range) | 4 | ||
| Total Supply Voltage (V+ to V-) | 70 | V | LTC6102/LTC6102-1 | 2 | |||
| Input Voltage Range -INF, -INS | -4 | 0.3 | V | Referenced to V+ (V+, 4V to V+ + 0.3V) | 2 | ||
| Input Voltage Range +IN | -20 | 1 | V | Referenced to V+ (V+, 20V to V+ + 1V) | 2 | ||
| Output Voltage Range (LTC6102) | -0.3 | 9 | V | Referenced to V- (V-, 0.3V to V- + 9V) | 2 | ||
| Input Current -INF, -INS | -10 | 10 | mA | 2 | |||
| Input Current +IN | -10 | mA | 2 | ||||
| Output Current | -1 | 10 | mA | (-1mA, +10mA) | 2 | ||
| Operating Temperature Range (LTC6102C) | -40 | 85 | °C | LTC6102C | 2 | ||
| Specified Temperature Range (LTC6102C) | 0 | 70 | °C | LTC6102C | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature (MS8) | TJMAX | 150 | °C | MS8 package | 2 | ||
| Thermal Resistance Junction-to-Ambient (MS8) | θJA | 200 | °C/W | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LTC6102CMS8#TRPBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc6102cms8-trpbf-etched.step/ltc6102cms8-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6102cms8-trpbf.step/ltc6102cms8-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
791cf701e1ca0017, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).