3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLTC6084CMS8#PBF
Analog Devices · Operational Amplifier · MSOP-8
LTC6084CMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Op-amp A output. Rail-to-rail CMOS output stage; swings within ~5mV of V+ or V- at no load. Short-circuit source/sink current typically 12.5mA. |
| 2 | -INA | input | Op-amp A inverting input. Rail-to-rail input; input common-mode range extends from V- to V+. Typical input bias current 1pA at 25°C. |
| 3 | +INA | input | Op-amp A non-inverting input. Rail-to-rail input; input common-mode range extends from V- to V+. Typical input bias current 1pA at 25°C. |
| 4 | V- | power_in | Negative supply pin. Typically ground for single-supply operation, or the negative rail for split-supply operation. Total supply voltage V+ to V- must be between 2.5V and 5.5V (absolute max 6V). |
| 5 | +INB | input | Op-amp B non-inverting input. Rail-to-rail input; input common-mode range extends from V- to V+. Typical input bias current 1pA at 25°C. |
| 6 | -INB | input | Op-amp B inverting input. Rail-to-rail input; input common-mode range extends from V- to V+. Typical input bias current 1pA at 25°C. |
| 7 | OUTB | output | Op-amp B output. Rail-to-rail CMOS output stage; swings within ~5mV of V+ or V- at no load. Short-circuit source/sink current typically 12.5mA. |
| 8 | V+ | power_in | Positive supply pin. Total supply voltage V+ to V- must be between 2.5V and 5.5V (absolute max 6V). Supply current typically 110µA per amplifier (220µA total). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LTC6084CMS8#PBFLTC6084CMS8#TRPBFLTC6084CMS8#PBFHMS8#PBFLTC6084CMS8#PBFHMS8#TRPBFLTC6084CMS8#PBFCDD#PBFLTC6084CMS8#PBFCDD#TRPBFLTC6084CMS8#PBFHDD#PBFLTC6084CMS8#PBFHDD#TRPBFLTC6084CMS8#PBFCGN#PBFLTC6084CMS8#PBFCGN#TRPBFLTC6084CMS8#PBFHGN#PBFLTC6084CMS8#PBFHGN#TRPBFLTC6084CMS8#PBFCDHC#PBFLTC6084CMS8#PBFCDHC#TRPBFLTC6084CMS8#PBFHDHC#PBFLTC6084CMS8#PBFHDHC#TRPBF
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset Voltage (MS8, C grade) | VOS | 300 | 750 | μV | V+ = 2.5V, V– = 0V, VCM = 0.5V; l = over operating temp range | 3 | |
| Input Bias Current (C grade) | IB | 1 | 40 | pA | Guaranteed by 5V test; l = over operating temp range | 3 | |
| Input Offset Current (C grade) | IOS | 0.5 | 30 | pA | Guaranteed by 5V test; l = over operating temp range | 3 | |
| Common Mode Rejection Ratio | CMRR | 64 | 80 | dB | 0 ≤ VCM ≤ 2.5V; l = over operating temp range | 3 | |
| Power Supply Rejection Ratio | PSRR | 94 | 115 | dB | VS = 2.5V to 5.5V; l = over operating temp range | 3 | |
| Output Voltage, High (referred to V+) | VOUT | 0.5 | 5 | mV | No load; l = over operating temp range | 3 | |
| Output Voltage, High (referred to V+) | VOUT | 39 | 85 | mV | ISOURCE = 1mA; l = over operating temp range | 3 | |
| Output Voltage, High (referred to V+) | VOUT | 220 | 460 | mV | ISOURCE = 5mA; l = over operating temp range | 3 | |
| Output Voltage, Low (referred to V–) | VOUT | 0.5 | 5 | mV | No load; l = over operating temp range | 3 | |
| Output Voltage, Low (referred to V–) | VOUT | 36 | 85 | mV | ISINK = 1mA; l = over operating temp range | 3 | |
| Output Voltage, Low (referred to V–) | VOUT | 200 | 460 | mV | ISINK = 5mA; l = over operating temp range | 3 | |
| Large-Signal Voltage Gain | AVOL | 400 | 2000 | V/mV | RLOAD = 10k, 0.4V ≤ VOUT ≤ 2.1V; l = over operating temp range | 3 | |
| Output Short-Circuit Current (source and sink) | ISC | 7.7 | 12.5 | mA | Source and sink; l = over operating temp range | 4 | |
| Gain Bandwidth Product | GBW | 0.9 | 1.5 | MHz | RLOAD = 50k, VCM = 1.25V, fTEST = 10kHz; l = over operating temp range | 4 | |
| Supply Current (per amplifier) | IS | 110 | 130 | μA | No load; l = over operating temp range | 4 | |
| Supply Voltage Range | VS | 2.5 | 5.5 | V | Guaranteed by the PSRR test; l = over operating temp range | 4 | |
| Offset Voltage (MS8, C grade) | VOS | 300 | 750 | μV | V+ = 5V, V– = 0V, VCM = 0.5V; l = over operating temp range | 4 | |
| Input Bias Current (C grade) | IB | 1 | 40 | pA | Guaranteed by 5V test; l = over operating temp range | 4 | |
| Input Offset Current (C grade) | IOS | 0.5 | 30 | pA | Guaranteed by 5V test; l = over operating temp range | 4 | |
| Common Mode Rejection Ratio | CMRR | 70 | 84 | dB | 0 ≤ VCM ≤ 5V; l = over operating temp range | 5 | |
| Power Supply Rejection Ratio | PSRR | 94 | 115 | dB | VS = 2.5V to 5.5V; l = over operating temp range | 5 | |
| Output Voltage, High (referred to V+) | VOUT | 0.5 | 5 | mV | No load; l = over operating temp range | 5 | |
| Output Voltage, High (referred to V+) | VOUT | 39 | 85 | mV | ISOURCE = 1mA; l = over operating temp range | 5 | |
| Output Voltage, High (referred to V+) | VOUT | 220 | 460 | mV | ISOURCE = 5mA; l = over operating temp range | 5 | |
| Output Voltage, Low (referred to V–) | VOUT | 0.5 | 5 | mV | No load; l = over operating temp range | 5 | |
| Output Voltage, Low (referred to V–) | VOUT | 36 | 85 | mV | ISINK = 1mA; l = over operating temp range | 5 | |
| Output Voltage, Low (referred to V–) | VOUT | 200 | 460 | mV | ISINK = 5mA; l = over operating temp range | 5 | |
| Large-Signal Voltage Gain | AVOL | 1000 | 5000 | V/mV | RLOAD = 10k, 0.5V ≤ VOUT ≤ 4.5V; l = over operating temp range | 5 | |
| Output Short-Circuit Current (source and sink) | ISC | 7.7 | 12.5 | mA | Source and sink; l = over operating temp range | 5 | |
| Gain Bandwidth Product | GBW | 0.9 | 1.5 | MHz | RLOAD = 50k, VCM = 2.5V, fTEST = 10kHz; l = over operating temp range | 5 | |
| Supply Current (per amplifier) | IS | 110 | 130 | μA | No load; l = over operating temp range | 5 | |
| Supply Voltage Range | VS | 2.5 | 5.5 | V | Guaranteed by the PSRR test; l = over operating temp range | 5 | |
| Total Supply Voltage (V+ to V–) | V+ to V- | 6 | V | V+ to V– | 2 | ||
| Input Current | IIN | -10 | 10 | mA | Printed as ±10mA | 2 | |
| Operating Temperature Range, LTC6084C | TOP | -40 | 85 | °C | LTC6084C; guaranteed functional (Note 3) | 2 | |
| Specified Temperature Range, LTC6084C | TSPEC | 0 | 70 | °C | LTC6084C specified performance (Note 4) | 3 | |
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 125 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | TLEAD | 300 | °C | MS8 package, 10 sec | 2 | ||
| Thermal Resistance, Junction to Ambient (MS8) | θJA | 200 | °C/W | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LTC6084CMS8#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc6084cms8-pbf-etched.step/ltc6084cms8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6084cms8-pbf.step/ltc6084cms8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
d2fb97d26e550bb2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).