main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc4415emse: viewers · Ray
ltc4415emse-etched.glb ltc4415emse: factory component page (tier=mfr) · Ray
ltc4415emse-etched.step ltc4415emse: factory component page (tier=mfr) · Ray
ltc4415emse-hero.glb ltc4415emse: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc4415emse-hero.overlay.json ltc4415emse: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc4415emse.glb Publish 0.1.0 · Ray
ltc4415emse.kicad_mod Publish 0.1.0 · Ray
ltc4415emse.kicad_sym Publish 0.1.0 · Ray
ltc4415emse.lbr Publish 0.1.0 · Ray
ltc4415emse.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 17 pins · Ray

LTC4415EMSE#TRPBF

Analog Devices · Power Distribution Switches · MSOP-16-EP

LTC4415EMSE#TRPBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 power_in Diode 1 anode and positive power supply for the LTC4415, bypassed with a ceramic capacitor of at least 4.7µF; pins 1 and 2 are fused together and can be grounded when unused.
2 IN1 power_in Diode 1 anode and positive power supply for the LTC4415, bypassed with a ceramic capacitor of at least 4.7µF; pins 1 and 2 are fused together and can be grounded when unused.
3 EN1 input Enable input for Diode 1, where a high signal greater than VENTH enables Diode 1.
4 CLIM1 passive Current limit adjust and monitor pin for Diode 1; a resistor to ground sets the limit, a short to ground selects a fixed 6A internal limit, and the pin must not be left open.
5 CLIM2 passive Current limit adjust and monitor pin for Diode 2; a resistor to ground sets the limit, a short to ground selects a fixed 6A internal limit, and the pin must not be left open.
6 EN2 input Enable input for Diode 2, where a low signal less than VENTH enables Diode 2.
7 IN2 power_in Diode 2 anode and positive power supply for the LTC4415, bypassed with a ceramic capacitor of at least 4.7µF; pins 7 and 8 are fused together and can be grounded when unused.
8 IN2 power_in Diode 2 anode and positive power supply for the LTC4415, bypassed with a ceramic capacitor of at least 4.7µF; pins 7 and 8 are fused together and can be grounded when unused.
9 OUT2 power_out Diode 2 cathode and output, bypassed with a ceramic capacitor of at least 4.7µF; pins 9 and 10 are fused together and should be left open when unused.
10 OUT2 power_out Diode 2 cathode and output, bypassed with a ceramic capacitor of at least 4.7µF; pins 9 and 10 are fused together and should be left open when unused.
11 STAT2 output Open-drain status output for Diode 2 that pulls down during forward diode conduction and can be left open or grounded when unused.
12 WARN2 output Open-drain overcurrent and thermal warning output for Diode 2 that pulls down when diode 2 current exceeds its current limit or die temperature is close to thermal shutdown.
13 WARN1 output Open-drain overcurrent and thermal warning output for Diode 1 that pulls down when diode 1 current exceeds its current limit or die temperature is close to thermal shutdown.
14 STAT1 output Open-drain status output for Diode 1 that pulls down during forward diode conduction and can be left open or grounded when unused.
15 OUT1 power_out Diode 1 cathode and output, bypassed with a ceramic capacitor of at least 4.7µF; pins 15 and 16 are fused together and should be left open when unused.
16 OUT1 power_out Diode 1 cathode and output, bypassed with a ceramic capacitor of at least 4.7µF; pins 15 and 16 are fused together and should be left open when unused.
17 GND power_in Device ground on the exposed pad, which must be soldered to PCB ground for both electrical connection and thermal conductivity.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-16-EP
Category Power Management (PMIC)
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Range VIN1, VOUT1, VIN2, VOUT2 1.7 5.5 V At Least One Input/Output Must Be in This Range 3
Reverse Turn-Off Current: OUT1 IQR(OUT) 18 40 µA VIN1 = 3.6V, VOUT1 = 3.7V, VIN2 = 3.5V, VOUT2 = 3.6V (VOUT1 > VOUT2) 3
Reverse Turn-Off Current: OUT2 IQR(OUT) 5 11 µA VIN1 = 3.6V, VOUT1 = 3.7V, VIN2 = 3.5V, VOUT2 = 3.6V (VOUT1 > VOUT2) 3
INx Pin Current In Reverse Turn-Off IQR(IN) 4 10 µA VOUT1 = VOUT2 = 5.5V 3
INx Pin Leakage Current ILEAK(IN) -1 1 µA VIN1 = VIN2 = 0V, VOUT1 = VOUT2 = 5.5V 3
Forward Regulation Voltage (VINx, VOUTx) VFR 5 15 25 mV IOUTx = -1mA 3
Reverse Turn-Off Voltage (VINx, VOUTx) VRTO -50 -30 -10 mV 3
Quiescent Current In Forward Regulation IQF 44 80 µA VIN1 = VEN1 = VEN2 = 3.6V, IOUT1 = -1mA, VIN2 = VOUT2 = 0V, Measured Through GND Pin 3
Quiescent Current In Shutdown IQOFF 13 28 µA VIN1 = VIN2 = VEN2 = 3.6V, VEN1 = 0V, VOUT1 = VOUT2 = 0V, Measured Through GND Pin 3
Undervoltage Lockout VUVLO 1.63 1.7 V VINx Rising 3
Forward Dynamic Resistance in Regulation RFR 18 30 mΩ IOUTx = -100mA to -300mA 3
On-Resistance in Constant Resistance Mode RON 50 70 mΩ IOUTx = -1A 3
PowerPath Turn-On Time Diode 1 tON 10 µs Before Enable VOUT1 = 1.5V, Diode 1 3
PowerPath Turn-On Time Diode 2 tON 23 µs Before Enable VOUT2 = 1.5V, Diode 2 3
PowerPath Turn-On Time Both Outputs tON 250 µs Before Enable VOUTx = 0V 3
PowerPath Turn-On from Shutdown (VOUTx = 1.5V) tON(SD) 70 µs Both Diodes Disabled and VOUTx = 1.5V Before Enable 3
PowerPath Turn-On from Shutdown (VOUTx = 0V) tON(SD) 320 µs Both Diodes Disabled and VOUTx = 0V Before Enable 3
PowerPath Switchover Time tSWITCH 9 µs VINx ↑ (2.6V to 4.6V) to VOUTx Starts Rising, Both Diodes Enabled, OUT1 and OUT2 Tied Together 3
PowerPath Turn-Off Time tOFF 2 µs Disable to IIN Falling from 100mA to 1mA 3
Soft-Start Duration tSS 2 ms VOUTx = 0V 3
Current Monitor Ratio at -4A ICLIMx /IOUTx 0.9 1 1.1 mA/A When IOUTx = -4A 3
Current Monitor Ratio at -2A ICLIMx /IOUTx 0.8 1 1.2 mA/A When IOUTx = -2A 3
CLIM Clamp Voltage In Current Limit VCLIM 0.5 V 3
Current Limit Adjustability ILIM(ADJ) 0.5 4 A 3
Accuracy of Adjustable Current Limit Threshold (4A) -8 8 % VOUTx = VINx, 0.5V, Current Limit = 4A 3
Accuracy of Adjustable Current Limit Threshold (2A) -15 15 % VOUTx = VINx, 0.5V, Current Limit = 2A 3
Internal Current Limit ILIM(INT) 4 6 9 A RCLIMx = 0Ω, VOUTx = 0V 3
Thermal Warning Threshold TWARN 130 °C Rising Temperature 3
Thermal Shutdown Threshold TSD 160 °C Rising Temperature 3
Open-Drain Output Low Voltage VOL 0.05 0.4 V Current Into Open-Drain Output = 3mA 3
Open-Drain Output High Leakage Current 0 1 µA Open-Drain Output Voltage = 5.5V 3
STAT Turn-On Time (EN1 rising) tSTAT(ON) 5 µs EN1 Rising to STAT1 Pull-Down 3
STAT Turn-On Time (EN2 falling) tSTAT(ON) 18 µs EN2 Falling to STAT2 Pull-Down 3
STAT Turn-Off Time tSTAT(OFF) 2 µs Disable to STAT Pull-Up 4
WARN Turn-On Time tWARN(ON) 500 µs Current Limit to WARN Pull-Down 4
WARN Turn-Off Time tWARN(OFF) 5 µs Out of Current Limit to WARN Pull-Up 4
EN1 Rising and EN2 Falling Thresholds VENTH 760 800 840 mV 4
EN1 and EN2 Hysteresis VENHYST 55 mV 4
Enable Pin Current When Pulled High 0 1 µA VEN1 = VEN2 = 3.6V 4
Input and Output Pin Voltage -0.3 6 V IN1, IN2, OUT1, OUT2, CLIM1, CLIM2, STAT1, STAT2, WARN1, WARN2 Voltage 2
EN Pin Voltage -0.3 V EN1, EN2 Voltage, Max (VINx, VOUTx) 2
Operating Junction Temperature Range -40 125 °C Notes 3, 4 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature (MSE package) TJMAX 125 °C MSE package 2
Thermal Resistance Junction to Ambient (MSE package) θJA 35 40 °C/W MSE package, printed as 35°C/W TO 40°C/W 2

CAD (KiCad official)

  • Symbol: LTC4415EMSE#TRPBF
  • Footprint: Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
  • 3D model: MSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: ltc4415emse-etched.step / ltc4415emse-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc4415emse.step / ltc4415emse.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 e35970b1d556a4ba, retrieved 2026-11-19)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF