main
Ray
Publish 0.1.0
57d0a28
LTC4359HDCB#TRMPBF
Analog Devices · Power Distribution Switches · DFN-6-EP(2x3)
LTC4359HDCB#TRMPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | input | Drain Voltage Sense. OUT is the cathode of the ideal diode and the common output when multiple LTC4359s are configured as an ideal diode-OR. |
| 2 | GATE | output | Gate Drive Output to the external N-channel MOSFET. |
| 3 | SOURCE | passive | Source Connection: return of the gate fast pull-down; connect close to the source of the external N-channel MOSFET. |
| 4 | IN | power_in | Voltage Sense and Supply Voltage. IN is the anode of the ideal diode. |
| 5 | SHDN | input | Shutdown Control Input: pulling it below 0.6V shuts the part down to a low current mode; above 2V or open turns it on (internal 2.6uA pull-up). |
| 6 | VSS | power_in | Supply Voltage Return and Device Ground. |
| 7 | Exposed Pad | passive | Exposed Pad (DCB Package Only): may be left open or connected to VSS ('EXPOSED PAD (PIN 7) PCB VSS CONNECTION OPTIONAL'). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x3) |
| Category | Power Management (PMIC) |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Range | VIN | 4 | 80 | V | 3 | ||
| IN Current | IIN | 150 | 200 | µA | IN = 12V | 3 | |
| IN Current (shutdown) | IIN | 9 | 20 | µA | IN = OUT = 12V, SHDN = 0V | 3 | |
| IN Current (shutdown) | IIN | 15 | 30 | µA | IN = OUT = 24V, SHDN = 0V | 3 | |
| IN Current (reverse) | IIN | 0 | -15 | -40 | µA | IN = −40V | 3 |
| Gate Drive (GATE-SOURCE) | ΔVGATE | 4.5 | 5.5 | 15 | V | IN = 4V, IGATE = 0, −1µA | 3 |
| Gate Drive (GATE-SOURCE) | ΔVGATE | 10 | 12 | 15 | V | IN = 8V to 80V; IGATE = 0, -1µA | 3 |
| Source-Drain Regulation Voltage (IN-OUT) | ΔVSD | 20 | 30 | 45 | mV | ΔVGATE = 2.5V | 3 |
| Gate Pull-Up Current | IGATE(UP) | -6 | -10 | -14 | µA | GATE = IN, ΔVSD = 0.1V | 3 |
| Gate Pull-Down Current (fault) | IGATE(DOWN) | 70 | 130 | 180 | mA | Fault Condition, ΔVGATE = 5V, ΔVSD = −1V | 3 |
| Gate Pull-Down Current (shutdown) | IGATE(DOWN) | 0.6 | mA | Shutdown Mode, ΔVGATE = 5V, ΔVSD = 0.7V | 3 | ||
| Gate Turn-Off Delay Time | tOFF | 0.3 | 0.5 | µs | ΔVSD = 0.1V to −1V, ΔVGATE < 2V, CGATE = 0pF | 3 | |
| Gate Turn-On Delay Time | tON | 200 | µs | IN = 12V, SOURCE = OUT = 0V, SHDN = 0V to 2V, ΔVGATE > 4.5V, CGATE = 0pF | 3 | ||
| SHDN Pin Input Threshold | VSHDN(TH) | 0.6 | 1.2 | 2 | V | IN = 4V to 80V | 3 |
| SHDN Pin Float Voltage | VSHDN(FLT) | 0.6 | 1.75 | 2.5 | V | IN = 4V to 80V | 3 |
| SHDN Pin Current | ISHDN | -1 | -3 | -5 | µA | SHDN = 0.5V, LTC4359H | 3 |
| SHDN Pin Current (reverse) | ISHDN | -0.4 | -0.8 | -1.5 | mA | SHDN = −40V | 3 |
| Reverse SOURCE Threshold for GATE Off | VSOURCE(TH) | -0.9 | -1.8 | -2.7 | V | GATE = 0V, IGATE(DOWN) = 1mA | 3 |
| IN, SOURCE, SHDN voltage | -40 | 100 | V | 2 | |||
| OUT voltage | -2 | 100 | V | Note 3 | 2 | ||
| IN, OUT | -100 | 100 | V | 2 | |||
| IN, SOURCE | -1 | 80 | V | 2 | |||
| GATE, SOURCE | -0.3 | 10 | V | Note 4 | 2 | ||
| Operating Ambient Temperature Range (LTC4359H) | -40 | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | DCB package | 2 | ||
| Junction-to-Ambient Thermal Resistance | θJA | 64 | °C/W | DCB package | 2 |
CAD (KiCad official)
- Symbol:
LTC4359HDCB#TRMPBF - Footprint:
Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm - 3D model: DFN-6-EP(2x3), generated on the KiCad land (body 3 x 2 mm, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ltc4359hdcb-etched.step/ltc4359hdcb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc4359hdcb.step/ltc4359hdcb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
8d05e6ba42590284, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC4359HDCB#TRMPBF
**Analog Devices** · Power Distribution Switches · DFN-6-EP(2x3)
LTC4359HDCB#TRMPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | input | Drain Voltage Sense. OUT is the cathode of the ideal diode and the common output when multiple LTC4359s are configured as an ideal diode-OR. |
| 2 | GATE | output | Gate Drive Output to the external N-channel MOSFET. |
| 3 | SOURCE | passive | Source Connection: return of the gate fast pull-down; connect close to the source of the external N-channel MOSFET. |
| 4 | IN | power_in | Voltage Sense and Supply Voltage. IN is the anode of the ideal diode. |
| 5 | SHDN | input | Shutdown Control Input: pulling it below 0.6V shuts the part down to a low current mode; above 2V or open turns it on (internal 2.6uA pull-up). |
| 6 | VSS | power_in | Supply Voltage Return and Device Ground. |
| 7 | Exposed Pad | passive | Exposed Pad (DCB Package Only): may be left open or connected to VSS ('EXPOSED PAD (PIN 7) PCB VSS CONNECTION OPTIONAL'). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x3) |
| Category | Power Management (PMIC) |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Range | VIN | 4 | | 80 | V | | 3 |
| IN Current | IIN | | 150 | 200 | µA | IN = 12V | 3 |
| IN Current (shutdown) | IIN | | 9 | 20 | µA | IN = OUT = 12V, SHDN = 0V | 3 |
| IN Current (shutdown) | IIN | | 15 | 30 | µA | IN = OUT = 24V, SHDN = 0V | 3 |
| IN Current (reverse) | IIN | 0 | -15 | -40 | µA | IN = −40V | 3 |
| Gate Drive (GATE-SOURCE) | ΔVGATE | 4.5 | 5.5 | 15 | V | IN = 4V, IGATE = 0, −1µA | 3 |
| Gate Drive (GATE-SOURCE) | ΔVGATE | 10 | 12 | 15 | V | IN = 8V to 80V; IGATE = 0, -1µA | 3 |
| Source-Drain Regulation Voltage (IN-OUT) | ΔVSD | 20 | 30 | 45 | mV | ΔVGATE = 2.5V | 3 |
| Gate Pull-Up Current | IGATE(UP) | -6 | -10 | -14 | µA | GATE = IN, ΔVSD = 0.1V | 3 |
| Gate Pull-Down Current (fault) | IGATE(DOWN) | 70 | 130 | 180 | mA | Fault Condition, ΔVGATE = 5V, ΔVSD = −1V | 3 |
| Gate Pull-Down Current (shutdown) | IGATE(DOWN) | 0.6 | | | mA | Shutdown Mode, ΔVGATE = 5V, ΔVSD = 0.7V | 3 |
| Gate Turn-Off Delay Time | tOFF | | 0.3 | 0.5 | µs | ΔVSD = 0.1V to −1V, ΔVGATE < 2V, CGATE = 0pF | 3 |
| Gate Turn-On Delay Time | tON | | | 200 | µs | IN = 12V, SOURCE = OUT = 0V, SHDN = 0V to 2V, ΔVGATE > 4.5V, CGATE = 0pF | 3 |
| SHDN Pin Input Threshold | VSHDN(TH) | 0.6 | 1.2 | 2 | V | IN = 4V to 80V | 3 |
| SHDN Pin Float Voltage | VSHDN(FLT) | 0.6 | 1.75 | 2.5 | V | IN = 4V to 80V | 3 |
| SHDN Pin Current | ISHDN | -1 | -3 | -5 | µA | SHDN = 0.5V, LTC4359H | 3 |
| SHDN Pin Current (reverse) | ISHDN | -0.4 | -0.8 | -1.5 | mA | SHDN = −40V | 3 |
| Reverse SOURCE Threshold for GATE Off | VSOURCE(TH) | -0.9 | -1.8 | -2.7 | V | GATE = 0V, IGATE(DOWN) = 1mA | 3 |
| IN, SOURCE, SHDN voltage | | -40 | | 100 | V | | 2 |
| OUT voltage | | -2 | | 100 | V | Note 3 | 2 |
| IN, OUT | | -100 | | 100 | V | | 2 |
| IN, SOURCE | | -1 | | 80 | V | | 2 |
| GATE, SOURCE | | -0.3 | | 10 | V | Note 4 | 2 |
| Operating Ambient Temperature Range (LTC4359H) | | -40 | | 125 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | DCB package | 2 |
| Junction-to-Ambient Thermal Resistance | θJA | | 64 | | °C/W | DCB package | 2 |
## CAD (KiCad official)
- Symbol: `LTC4359HDCB#TRMPBF`
- Footprint: `Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm`
- 3D model: DFN-6-EP(2x3), generated on the KiCad land (body 3 x 2 mm, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ltc4359hdcb-etched.step` / `ltc4359hdcb-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc4359hdcb.step` / `ltc4359hdcb.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4359.pdf) (20 pp, sha256 `8d05e6ba42590284`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc4359hdcb-datasheet.pdf)