main
Ray
ltc4307ims8-trpbf: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ca5d2de
LTC4307IMS8#TRPBF
Analog Devices · Signal Buffers, Repeaters, Splitters · MSOP-8
LTC4307IMS8#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENABLE | input | Active-high connect enable. Driving ENABLE high allows the LTC4307 to connect SDAIN/SCLIN to SDAOUT/SCLOUT after a stop bit or bus idle; driving low breaks the connection. Threshold ~1.4V, input current ~0.1µA. |
| 2 | SCLOUT | bidirectional | Output (card-side) side of the buffered I2C/SMBus clock line. Open-drain, connects to SCLIN when ENABLE is high and bus is idle. Precharged to ~1V; used to generate up to 16 recovery pulses when a stuck bus is detected. |
| 3 | SCLIN | bidirectional | Input (backplane-side) side of the buffered I2C/SMBus clock line. Open-drain, precharged to ~1V, high-impedance when VCC = 0V. Logic threshold ~0.55·VCC. |
| 4 | GND | power_in | Device ground reference. All voltages referenced to GND. |
| 5 | READY | output | Open-drain status output that pulls low until the backplane and card sides are connected (bus buffer engaged). Requires an external pull-up; VOL ≤ 0.4V at 3mA sink. |
| 6 | SDAIN | bidirectional | Input (backplane-side) side of the buffered I2C/SMBus data line. Open-drain, precharged to ~1V, high-impedance when VCC = 0V. Logic threshold ~0.55·VCC. |
| 7 | SDAOUT | bidirectional | Output (card-side) side of the buffered I2C/SMBus data line. Open-drain, connects to SDAIN when ENABLE is high and bus is idle. VOS ≈ 60mV (100mV max) versus SDAIN when driven low. |
| 8 | VCC | power_in | Positive supply, 2.3V to 5.5V. Bypass with 0.01µF to GND close to the pin. ICC ≈ 8mA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LTC4307CMS8LTC4307IMS8#TRPBFLTC4307CDDLTC4307IDD
CAD (KiCad official)
- Symbol:
LTC4307IMS8#TRPBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc4307ims8-trpbf-etched.step/ltc4307ims8-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc4307ims8-trpbf.step/ltc4307ims8-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
7e7302fb279aaa88, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC4307IMS8#TRPBF
**Analog Devices** · Signal Buffers, Repeaters, Splitters · MSOP-8
LTC4307IMS8#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENABLE | input | Active-high connect enable. Driving ENABLE high allows the LTC4307 to connect SDAIN/SCLIN to SDAOUT/SCLOUT after a stop bit or bus idle; driving low breaks the connection. Threshold ~1.4V, input current ~0.1µA. |
| 2 | SCLOUT | bidirectional | Output (card-side) side of the buffered I2C/SMBus clock line. Open-drain, connects to SCLIN when ENABLE is high and bus is idle. Precharged to ~1V; used to generate up to 16 recovery pulses when a stuck bus is detected. |
| 3 | SCLIN | bidirectional | Input (backplane-side) side of the buffered I2C/SMBus clock line. Open-drain, precharged to ~1V, high-impedance when VCC = 0V. Logic threshold ~0.55·VCC. |
| 4 | GND | power_in | Device ground reference. All voltages referenced to GND. |
| 5 | READY | output | Open-drain status output that pulls low until the backplane and card sides are connected (bus buffer engaged). Requires an external pull-up; VOL ≤ 0.4V at 3mA sink. |
| 6 | SDAIN | bidirectional | Input (backplane-side) side of the buffered I2C/SMBus data line. Open-drain, precharged to ~1V, high-impedance when VCC = 0V. Logic threshold ~0.55·VCC. |
| 7 | SDAOUT | bidirectional | Output (card-side) side of the buffered I2C/SMBus data line. Open-drain, connects to SDAIN when ENABLE is high and bus is idle. VOS ≈ 60mV (100mV max) versus SDAIN when driven low. |
| 8 | VCC | power_in | Positive supply, 2.3V to 5.5V. Bypass with 0.01µF to GND close to the pin. ICC ≈ 8mA typical. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Interface |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LTC4307CMS8`
- `LTC4307IMS8#TRPBF`
- `LTC4307CDD`
- `LTC4307IDD`
## CAD (KiCad official)
- Symbol: `LTC4307IMS8#TRPBF`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `ltc4307ims8-trpbf-etched.step` / `ltc4307ims8-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc4307ims8-trpbf.step` / `ltc4307ims8-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916972654772224) (16 pp, sha256 `7e7302fb279aaa88`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc4307ims8-trpbf-datasheet.pdf)