main
Ray Publish 0.1.1 3dd0d88
{
  "slug": "ltc3769euf-pbf",
  "version": "0.1.1",
  "type": "component",
  "description": "Analog Devices DC-DC Controllers, QFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ltc3769euf#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc3769euf-pbf.kicad_sym",
    "ltc3769euf-pbf.kicad_mod",
    "ltc3769euf-pbf.glb",
    "ltc3769euf-pbf.step",
    "ltc3769euf-pbf.lbr",
    "docs/hero.png",
    "docs/ltc3769euf-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc3769euf-pbf-hero.glb",
    "ltc3769euf-pbf-hero.overlay.json",
    "ltc3769euf-pbf-etched.glb",
    "ltc3769euf-pbf-etched.step"
  ],
  "component": {
    "mpn": "LTC3769EUF#PBF",
    "manufacturer": "Analog Devices",
    "package": "QFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3769fa.pdf",
    "parts": {
      "symbol": "ltc3769euf-pbf.kicad_sym",
      "footprint": "ltc3769euf-pbf.kicad_mod",
      "model_3d": "ltc3769euf-pbf-hero.glb",
      "model_3d_plain": "ltc3769euf-pbf.glb",
      "model_3d_step": "ltc3769euf-pbf-etched.step",
      "model_3d_step_plain": "ltc3769euf-pbf.step",
      "lbr": "ltc3769euf-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C580796",
      "digikey": "505-LTC3769EUF#PBF-ND",
      "mouser": "584-LTC3769EUF#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T22:43:10Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC3769EUF#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC3769EUF#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBIAS",
        "type": "power_in",
        "description": "Main supply pin with an operating voltage range of 4.5V to 60V (65V abs max), normally tied to VIN or the boost output and bypassed to signal ground."
      },
      {
        "number": "2",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power good output that is pulled to ground when the output voltage is more than ±10% away from the regulated output, after 45μs outside the range."
      },
      {
        "number": "3",
        "name": "ILIM",
        "type": "input",
        "description": "Sets the peak current sense threshold to 50mV, 75mV or 100mV when connected to GND, left floating or connected to INTVCC respectively."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; shown as NC in the QFN pin configuration."
      },
      {
        "number": "5",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Output of the internal 5.4V LDO that powers control circuits and gate drivers; connect to pin 22 and decouple to GND with at least 4.7μF low ESR ceramic capacitor."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; shown as NC in the QFN pin configuration."
      },
      {
        "number": "7",
        "name": "FREQ",
        "type": "input",
        "description": "Frequency control pin: GND forces 350kHz, INTVCC forces 535kHz, and a resistor to GND programs 50kHz to 900kHz."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected, with the exposed pad soldered to the PCB for rated electrical and thermal performance."
      },
      {
        "number": "9",
        "name": "PLLIN/MODE",
        "type": "input",
        "description": "External synchronization input and light-load mode select; GND selects Burst Mode operation and INTVCC forces continuous inductor current operation."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected, with the exposed pad soldered to the PCB for rated electrical and thermal performance."
      },
      {
        "number": "11",
        "name": "RUN",
        "type": "input",
        "description": "Run control input: forcing below 1.28V shuts down the controller and forcing below 0.7V shuts down the entire LTC3769 to approximately 4μA quiescent current."
      },
      {
        "number": "12",
        "name": "SS",
        "type": "input",
        "description": "Output soft-start input where a capacitor to ground sets the output voltage ramp rate during start-up."
      },
      {
        "number": "13",
        "name": "SENSE–",
        "type": "input",
        "description": "Negative current sense comparator input, normally connected to the negative terminal of a current sense resistor in series with the inductor."
      },
      {
        "number": "14",
        "name": "SENSE+",
        "type": "input",
        "description": "Positive current sense comparator input that also powers the current comparator, with a common mode range of 2.3V to 60V (65V abs max)."
      },
      {
        "number": "15",
        "name": "VFB",
        "type": "input",
        "description": "Error amplifier feedback input receiving the remotely sensed output through an external resistive divider, regulating to a ±1% 1.200V reference."
      },
      {
        "number": "16",
        "name": "ITH",
        "type": "passive",
        "description": "Current control threshold and error amplifier compensation point whose voltage sets the current trip threshold."
      },
      {
        "number": "17",
        "name": "OVMODE",
        "type": "input",
        "description": "Overvoltage mode select: tying to GND enables overvoltage protection with TG forced on, while tying to INTVCC disables it and sets pulse-skipping when synchronized."
      },
      {
        "number": "18",
        "name": "SW",
        "type": "passive",
        "description": "Switch node connected to the synchronous MOSFET source, main MOSFET drain and inductor, rated -5V to 65V absolute maximum."
      },
      {
        "number": "19",
        "name": "TG",
        "type": "output",
        "description": "Top gate driver output connected to the gate of the synchronous N-channel MOSFET."
      },
      {
        "number": "20",
        "name": "BOOST",
        "type": "passive",
        "description": "Floating power supply for the synchronous N-channel MOSFET, bypassed to SW with a capacitor and supplied through a Schottky diode from INTVCC."
      },
      {
        "number": "21",
        "name": "BG",
        "type": "output",
        "description": "Bottom gate driver output connected to the gate of the main N-channel MOSFET."
      },
      {
        "number": "22",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Output of the internal 5.4V LDO, connected to pin 5 by a PCB trace and decoupled to GND with at least 4.7μF low ESR ceramic capacitor."
      },
      {
        "number": "23",
        "name": "EXTVCC",
        "type": "power_in",
        "description": "External power input to an internal LDO supplying INTVCC when higher than 4.7V; do not float or exceed 14V on this pin."
      },
      {
        "number": "24",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected, with the exposed pad soldered to the PCB for rated electrical and thermal performance."
      },
      {
        "number": "25",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that must be soldered to the PCB for rated electrical and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 4 and 6 are NC in the QFN pin configuration diagram (page 2) and have no pin-function entry, so"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0356,
        "at": "2026-10-30T22:43:00"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3769fa.pdf",
        "pages": 32,
        "sha256": "05707b908f19ef44",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc3769euf-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc3769euf-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e2299ac124398111f2e8d9ad5b2e919ff6ad11fc4986c56f7136e15a1cb6652d",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "LTC3769EUF#PBF",
  "brief": "Analog Devices DC-DC Controllers, QFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Analog Devices",
      "Package": "QFN-24-EP(4x4)",
      "Category": "Power Supply Chip",
      "Pins": "25"
    }
  },
  "discovery_triggers": [
    "ltc3769euf#pbf"
  ],
  "discovery_pitch": "LTC3769EUF#PBF (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}