component
LTC3604EMSE#PBF
Public Made by Adomby adom
Analog Devices DC-DC Converters, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| ltc3604emse-pbf-etched.glb | 8d ago |
| ltc3604emse-pbf-etched.step | 8d ago |
| ltc3604emse-pbf-hero.glb | 8d ago |
| ltc3604emse-pbf-hero.overlay.json | 8d ago |
| ltc3604emse-pbf.glb | 8d ago |
| ltc3604emse-pbf.kicad_mod | 8d ago |
| ltc3604emse-pbf.kicad_sym | 8d ago |
| ltc3604emse-pbf.lbr | 8d ago |
| ltc3604emse-pbf.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
| verification.json | 8d ago |
LTC3604EMSE#PBF
Analog Devices · DC-DC Converters · MSOP-16-EP
LTC3604EMSE#PBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node output connected to the SW side of the external inductor, with normal voltage swing from ground to PVIN. |
| 2 | SW | output | Switch node output connected to the SW side of the external inductor, with normal voltage swing from ground to PVIN. |
| 3 | PGND | power_in | Power ground; the (-) terminals of the input capacitor CIN and output capacitor COUT must be tied to it with a low-impedance connection. |
| 4 | PGND | power_in | Power ground; the (-) terminals of the input capacitor CIN and output capacitor COUT must be tied to it with a low-impedance connection. |
| 5 | BOOST | power_out | Boosted floating driver supply; the bootstrap capacitor (+) connects here and (-) to SW, with swing from a diode drop below INTVCC up to PVIN + INTVCC. |
| 6 | INTVCC | power_out | Internal 3.3V regulator output that must be decoupled to PGND with a low-ESR ceramic capacitor of 1µF or more. |
| 7 | VON | input | On-time voltage input that sets the on-time comparator trip point; connect to the regulated output, with a normal pin impedance of 180kΩ. |
| 8 | RT | input | Oscillator frequency program pin; a resistor between 80k and 400k to SGND sets 800kHz to 4MHz, and tying it to INTVCC defaults the frequency to 2MHz. |
| 9 | FB | input | Output voltage feedback input to the error amplifier, which compares it to the internal 0.6V reference through an external resistor divider. |
| 10 | ITH | passive | Error amplifier output and compensation pin for the regulator loop; connect to INTVCC to use the default internal compensation. |
| 11 | TRACK/SS | input | Output tracking and soft-start input; forcing below 0.6V overrides the internal reference, and an internal 1.4µA pull-up lets an external capacitor to ground set soft-start. |
| 12 | RUN | input | Regulator enable pin; a voltage above 1.25V enables the chip, below 1V shuts it down, and it must not be left floating. |
| 13 | VIN | power_in | Main power supply input that should be closely decoupled to PGND with a low-ESR capacitor of 10µF or more. |
| 14 | VIN | power_in | Main power supply input that should be closely decoupled to PGND with a low-ESR capacitor of 10µF or more. |
| 15 | MODE/SYNC | input | Mode selection and external synchronization input; tying to ground forces forced continuous operation, while floating or tying to INTVCC enables Burst Mode operation, and an external clock synchronizes the oscillator. |
| 16 | PGOOD | output | Open-drain power good output that is pulled to ground when FB is outside ±8% (typical) of the 0.6V reference and goes high impedance once FB is within ±5% (typical). |
| 17 | SGND | power_in | Signal ground exposed pad that must be soldered to the PCB for thermal contact in the MSE package and serves as the return for the feedback network, compensation network and RT resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-16-EP |
| Category | Power Management ICs |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply range (VIN) | VIN | 3.6 | 15 | V | 3 | ||
| Feedback reference voltage | VFB | 0.594 | 0.6 | 0.606 | V | l: full operating junction temperature range | 3 |
| Feedback pin input current | IFB | -30 | 30 | nA | VFB = 0.6V | 3 | |
| Valley switch current limit | ILIM | 2.6 | 3.4 | 4.3 | A | 3 | |
| Minimum off-time | tOFF(MIN) | 40 | 60 | ns | VIN = 6V | 3 | |
| Oscillator frequency | fOSC | 1.4 | 2 | 2.6 | MHz | VRT = INTVCC | 3 |
| Oscillator frequency | fOSC | 1.7 | 2 | 2.3 | MHz | RRT = 160k | 3 |
| Oscillator frequency | fOSC | 3.4 | 4 | 4.6 | MHz | RRT = 80k | 3 |
| Input DC supply current, forced continuous operation | IQ | 700 | 1000 | µA | MODE = 0V | 3 | |
| Sleep current | IQ | 300 | 500 | µA | MODE = INTVCC, VFB > 0.6V | 3 | |
| Shutdown current | IQ | 14 | 25 | µA | RUN = 0V | 3 | |
| VIN overvoltage lockout threshold, rising | VVIN(OV) | 16.8 | 17.5 | 18 | V | l: VIN rising; full operating junction temperature range | 3 |
| VIN overvoltage lockout threshold, falling | VVIN(OV) | 15.8 | 16.5 | 17 | V | l: VIN falling; full operating junction temperature range | 3 |
| INTVCC voltage | VINTVCC | 3.13 | 3.3 | 3.45 | V | 3.6V < VIN < 15V | 3 |
| RUN threshold, rising | VRUN | 1.21 | 1.25 | 1.29 | V | RUN rising; l: full operating junction temperature range | 3 |
| RUN threshold, falling | VRUN | 0.97 | 1 | 1.03 | V | RUN falling; l: full operating junction temperature range | 3 |
| RUN leakage current | IRUN(LKG) | -3 | 0 | 3 | µA | VVIN = 15V | 3 |
| Internal soft-start time | tSS | 400 | 700 | µs | VFB from 10% to 90% full scale | 3 | |
| TRACK pin voltage | VFB_TRACK | 0.28 | 0.3 | 0.315 | mV | TRACK = 0.3V | 3 |
| MODE input current | IMODE | -1.5 | µA | MODE = 0V | 3 | ||
| MODE input current | IMODE | 1.5 | µA | MODE = INTVCC | 3 | ||
| VIN pin voltage (absolute maximum) | VIN | -0.3 | 16 | V | 2 | ||
| VIN transient voltage | VIN | 18 | V | Transient | 2 | ||
| BOOST pin voltage | BOOST | -0.3 | 18.6 | V | 2 | ||
| BOOST-SW voltage | BOOST-SW | -0.3 | 3.6 | V | 2 | ||
| INTVCC pin voltage | INTVCC | -0.3 | 3.6 | V | 2 | ||
| ITH, RT pin voltage | ITH, RT | -0.3 | V | Printed maximum is INTVCC + 0.3V (not a fixed number) | 2 | ||
| MODE/SYNC, FB pin voltage | MODE/SYNC, FB | -0.3 | V | Printed maximum is INTVCC + 0.3V (not a fixed number) | 2 | ||
| TRACK/SS pin voltage | TRACK/SS | -0.3 | V | Printed maximum is INTVCC + 0.3V (not a fixed number) | 2 | ||
| PGOOD, VON pin voltage | PGOOD, VON | -0.3 | 16 | V | 2 | ||
| SW, RUN pin voltage | SW, RUN | -0.3 | V | Printed maximum is VIN + 0.3V (not a fixed number) | 2 | ||
| SW source current (DC) | ISW | 3 | A | DC | 2 | ||
| Operating junction temperature range | TJ | -40 | 125 | °C | Notes 2, 3, 5 | 2 | |
| Storage temperature range | TSTG | -65 | 125 | °C | 2 | ||
| Lead temperature (soldering, MSOP) | TLEAD | 300 | °C | 10 sec soldering, MSOP | 2 | ||
| Junction-to-ambient thermal resistance (MSE package) | θJA | 38 | °C/W | MSE (16-lead MSOP) package | 2 |
CAD (KiCad official)
- Symbol:
LTC3604EMSE#PBF - Footprint:
Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm - 3D model: MSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
ltc3604emse-pbf-etched.step/ltc3604emse-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc3604emse-pbf.step/ltc3604emse-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
60bc02b63bd949a7, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).