Generated by kicad-footprint-generator · KiCad file format 20260206
LTC3525ESC6-3.3#TRMPBF
Analog Devices · DC-DC Converters · SC-70-6
LTC3525ESC6-3.3#TRMPBF from Analog Devices, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Logic-controlled shutdown input: connect to a voltage above 1V to enable the LTC3525 and below 0.4V to disable it, with a 6V absolute maximum on SHDN. |
| 2 | GND | power_in | Ground pin (one of two GND pins, pins 2 and 5, that are internally common). |
| 3 | VIN | power_in | Input voltage; the LTC3525 runs from VIN until VOUT exceeds VIN by about 0.2V, and a ceramic bypass capacitor of at least 1µF should be placed from VIN to GND. |
| 4 | VOUT | power_out | Output voltage sense and synchronous rectifier output; a ceramic filter capacitor of at least 10µF should be connected from VOUT to GND close to the IC (22µF for reduced ripple), and the output disconnects from VIN when SHDN is below 0.4V. |
| 5 | GND | power_in | Ground pin (one of two GND pins, pins 2 and 5, that are internally common). |
| 6 | SW | output | Switch pin: connect the inductor from this pin to VIN; an internal antiringing resistor is connected across SW and VIN after the inductor current drops to zero, and the absolute maximum SW voltage is 6V (7V for under 100ns). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SC-70-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | 3.2 | 3.3 | 3.4 | V | l = full operating junction temperature range; VIN = 1.2V, VSHDN = 1.2V, VOUT = 3.3V unless otherwise noted (Note 6) | 3 | |
| Input Start-Up Voltage | 0.85 | 1 | V | 3 | |||
| Quiescent Current, VOUT | 7 | 15 | µA | SHDN = VIN (Note 4) | 3 | ||
| Quiescent Current, VIN | 0.5 | 3 | µA | SHDN = VIN (Note 4) | 3 | ||
| Quiescent Current, VIN, Shutdown | 0.1 | 1 | µA | SHDN = 0V, VOUT = 0V; not including switch leakage | 3 | ||
| NMOS Switch Leakage Current | 0.1 | 1 | µA | VIN = VOUT = VSW = 5V, SHDN = 0V | 3 | ||
| PMOS Switch Leakage Current | 0.1 | 3 | µA | VIN = VSW = 5V, VOUT = 0V, SHDN = 0V | 3 | ||
| NMOS Switch On-Resistance | 0.5 | Ω | Note 3 | 3 | |||
| PMOS Switch On-Resistance | 0.8 | Ω | Note 3 | 3 | |||
| Peak Current Limit | 0.4 | 0.45 | A | 3 | |||
| SHDN Threshold Voltage | 0.4 | 0.6 | 1 | V | 3 | ||
| SHDN Input Current | 0.01 | 1 | µA | VSHDN = VIN or VOUT | 3 | ||
| VIN, VOUT Voltage | VIN, VOUT | -0.3 | 6 | V | 2 | ||
| SW Voltage | -0.3 | 6 | V | 2 | |||
| SW Voltage < 100ns | -0.3 | 7 | V | < 100ns | 2 | ||
| SHDN Voltage | -0.3 | 6 | V | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Notes 2, 5 | 2 | |
| Storage Temperature Range | -65 | 125 | °C | 2 | |||
| SHDN Enable Voltage | 1 | V | Connect to a voltage >1V to enable the LTC3525 (pin SHDN) | 8 | |||
| SHDN Disable Voltage | 0.4 | V | Connect to a voltage <0.4V to disable the LTC3525 (pin SHDN) | 8 | |||
| Junction-to-Ambient Thermal Resistance | θJA | 256 | °C/W | in free air | 2 | ||
| Junction-to-Ambient Thermal Resistance | θJA | 150 | °C/W | on board over ground plane | 2 | ||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LTC3525ESC6-3.3#TRMPBF - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6, generated on the KiCad land (body 1.25 x 2 mm, terminals on the pads, 1.0 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ltc3525esc6-3-3-etched.step/ltc3525esc6-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc3525esc6-3-3.step/ltc3525esc6-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
17b853b55de070f6, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).