← Commit history

Publish 0.1.1

Ray ·ddbea0e5b5 · ·parent c36b1e0
4 files changed +58−58
README.md+22−22
@@ -8,11 +8,11 @@ LTC331YT5 from Linearin, in a SOT-23-5L. Pinout and pin descriptions extracted f  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | +IN | input | Positive comparator input with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V). |+| 1 | +IN | input | Positive comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V), the same as -IN. | | 2 | -VS | power_in | Negative power supply (ground in single-supply use); supply voltage VS+ to VS- is 1.8 V to 5.5 V operating, 10.0 V absolute maximum. |-| 3 | -IN | input | Negative comparator input with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V). |-| 4 | OUT | output | Open-drain comparator output that needs an external pull-up resistor, with 30 mA typical sink drive at 5 V supply. |-| 5 | +VS | power_in | Positive power supply, 1.8 V to 5.5 V operating range. |+| 3 | -IN | input | Negative comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V). |+| 4 | OUT | output | Open-drain comparator output that sinks 30 mA typically at 5V supply and needs an external pull-up resistor. |+| 5 | +VS | power_in | Positive power supply, 1.8 V to 5.5 V operating range with 10.0 V absolute maximum between VS+ and VS-. |  ## Key specifications @@ -32,33 +32,33 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Input offset voltage | VOS | -5 | 1 | 5 | mV | VCM = 0 | 3 | | Offset voltage drift | VOS TC | -2 |  | 2 | μV/℃ | TA = −40 to +85 ℃ | 3 | | Power supply rejection ratio | PSRR | 70 | 82 |  | dB | VS = 1.8 to 5.5 V, VCM < (VS+ − 1V) | 3 |-| Power supply rejection ratio over temperature | PSRR | 66 |  |  | dB | TA = −40 to +85 ℃ | 3 |+| Power supply rejection ratio | PSRR | 66 |  |  | dB | TA = −40 to +85 ℃ | 3 | | Input bias current | IB |  | 5 | 30 | pA | VCM = VS+ /2 | 3 |-| Input bias current over temperature | IB |  |  | 800 | pA | TA = −40 to +85 ℃ | 3 |+| Input bias current | IB |  |  | 800 | pA | TA = −40 to +85 ℃ | 3 | | Input offset current | IOS |  | 10 | 50 | pA | VCM = VS+ /2 | 3 |-| Input offset current over temperature | IOS |  |  | 1000 | pA | TA = −40 to +85 ℃ | 3 |+| Input offset current | IOS |  |  | 1000 | pA | TA = −40 to +85 ℃ | 3 | | Common-mode rejection ratio | CMRR | 61 | 78 |  | dB | VS = 5.5 V, VCM = −0.1 to 5.5 V | 3 |-| Common-mode rejection ratio over temperature | CMRR | 58 |  |  | dB | VCM = 0 to 5.3 V, TA = −40 to +85 ℃ | 3 |+| Common-mode rejection ratio | CMRR | 58 |  |  | dB | VCM = 0 to 5.3 V, TA = −40 to +85 ℃ | 3 | | Common-mode rejection ratio | CMRR | 58 | 77 |  | dB | VS = 1.8 V, VCM = −0.1 to 1.8 V | 3 |-| Common-mode rejection ratio over temperature | CMRR | 55 |  |  | dB | VCM = 0 to 1.6 V, TA = −40 to +85 ℃ | 3 |+| Common-mode rejection ratio | CMRR | 55 |  |  | dB | VCM = 0 to 1.6 V, TA = −40 to +85 ℃ | 3 | | Low output voltage swing | VOL |  | 50 | 80 | mV | ISINK = 1 mA | 3 |-| Low output voltage swing over temperature | VOL |  |  | 90 | mV | TA = −40 to +85 ℃ | 3 |-| Output short-circuit current | ISC | -30 | -25 |  | mA | Sink current | 3 |+| Low output voltage swing | VOL |  |  | 90 | mV | TA = −40 to +85 ℃ | 3 |+| Output short-circuit current | ISC | -30 |  | -25 | mA | Sink current | 3 | | Operating supply voltage | VS | 1.8 |  | 5.5 | V |  | 3 | | Quiescent current (per comparator) | IQ |  | 32 | 40 | μA | VS = 1.8 V, VCM = 0.5V, IO = 0 | 3 |-| Quiescent current (per comparator) over temperature | IQ |  |  | 50 | μA | TA = −40 to +85 ℃ | 3 |+| Quiescent current (per comparator) | IQ |  |  | 50 | μA | TA = −40 to +85 ℃ | 3 | | Quiescent current (per comparator) | IQ |  | 37 | 45 | μA | VS = 5.5 V, VCM = 0.5V, IO = 0 | 3 |-| Quiescent current (per comparator) over temperature | IQ |  |  | 60 | μA | TA = −40 to +85 ℃ | 3 |-| Supply voltage, VS+ to VS− | VS |  |  | 10 | V |  | 2 |-| Signal input terminals current |  | -10 |  | 10 | mA | Signal input terminals | 2 |+| Quiescent current (per comparator) | IQ |  |  | 60 | μA | TA = −40 to +85 ℃ | 3 |+| Operating temperature range | TA | -40 |  | 85 | ℃ |  | 4 |+| Supply voltage, VS+ to VS- |  |  |  | 10 | V |  | 2 |+| Signal input terminals: current |  | -10 |  | 10 | mA | Signal input terminals | 2 | | Storage temperature range | Tstg | -65 |  | 150 | ℃ |  | 2 | | Junction temperature | TJ |  |  | 150 | ℃ |  | 2 | | Lead temperature range (soldering) |  |  |  | 260 | ℃ | Soldering 10 sec | 2 |-| ESD human body model (HBM) |  | -5000 |  | 5000 | V | Per MIL-STD-883J / Method 3015.9 | 2 |-| ESD charged device model (CDM) |  | -2000 |  | 2000 | V | Per ESDA/JEDEC JS-002-2014 | 2 |-| ESD machine model (MM) |  | -250 |  | 250 | V | Per JESD22-A115C | 2 |-| Operating temperature range | TA | -40 |  | 85 | ℃ |  | 4 |-| Package thermal resistance, junction to ambient | θJA |  | 190 |  | ℃/W | SOT23-5L | 4 |+| Electrostatic discharge voltage, human body model |  | -5000 |  | 5000 | V | HBM, per MIL-STD-883J / Method 3015.9 | 2 |+| Electrostatic discharge voltage, charged device model |  | -2000 |  | 2000 | V | CDM, per ESDA/JEDEC JS-002-2014 | 2 |+| Electrostatic discharge voltage, machine model |  | -250 |  | 250 | V | MM, per JESD22-A115C | 2 |+| Package thermal resistance, SOT23-5L | θJA |  | 190 |  | ℃/W | SOT23-5L | 4 |  ## CAD (land: KiCad; 3D: generated from the datasheet) @@ -71,8 +71,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Linearin datasheet](docs/ltc331yt5-r6-datasheet.pdf) (19 pp, sha256 `8b7b5b36fa34469b`, retrieved 2026-11-12, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [Linearin datasheet](docs/ltc331yt5-r6-datasheet.pdf) (19 pp, sha256 `8b7b5b36fa34469b`, retrieved 2026-11-13, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).  [Datasheet PDF](docs/ltc331yt5-r6-datasheet.pdf)
ltc331yt5-r6.step+1−1
@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-12T21:57:02',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-13T02:25:06',('Author'),(     'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'   ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
package.json+16−17
@@ -1,6 +1,6 @@ {   "slug": "ltc331yt5-r6",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Linearin Comparators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -51,7 +51,7 @@       "lcsc": "C2888112"     },     "distributor_check": {-      "checked_at": "2026-11-12T21:57:10Z",+      "checked_at": "2026-11-13T02:25:13Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -67,7 +67,7 @@         "number": "1",         "name": "+IN",         "type": "input",-        "description": "Positive comparator input with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V)."+        "description": "Positive comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V), the same as -IN."       },       {         "number": "2",@@ -79,19 +79,19 @@         "number": "3",         "name": "–IN",         "type": "input",-        "description": "Negative comparator input with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V)."+        "description": "Negative comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V)."       },       {         "number": "4",         "name": "OUT",         "type": "output",-        "description": "Open-drain comparator output that needs an external pull-up resistor, with 30 mA typical sink drive at 5 V supply."+        "description": "Open-drain comparator output that sinks 30 mA typically at 5V supply and needs an external pull-up resistor."       },       {         "number": "5",         "name": "+VS",         "type": "power_in",-        "description": "Positive power supply, 1.8 V to 5.5 V operating range."+        "description": "Positive power supply, 1.8 V to 5.5 V operating range with 10.0 V absolute maximum between VS+ and VS-."       }     ],     "provenance": {@@ -99,18 +99,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",-        "primary_mode": "text+vision",-        "consensus_model": "claude-opus-5-5",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: LTC331YT5 is the standard SOT23-5L (marking CG7) with the pinout shown for 'LTC331 SOT23-5L / SC70-5",-          "vision extraction: provenance cannot be text-verified; needs consensus"+          "extractor flagged: The pin diagram text for the LTC331 SOT23-5L/SC70-5L is garbled. Pin numbers were mapped from the st; The datasheet shows a second SOT23-5L pinout for the LTC331R variant in which -IN and +IN are swappe"         ],         "pages_sent": 19,-        "cost_usd": 0.1389,-        "at": "2026-11-12T21:56:57"+        "cost_usd": 0.0264,+        "at": "2026-11-13T02:25:01"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/1f404461eb0742c1ad8ae73d930edb81.pdf",@@ -158,8 +157,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "937193403cc22bd44d529e77b34eb860f599a5d2343f399d1cc3ef87b3acf394",-        "checked": "2026-11-12",+        "sha256": "b8ae8a2ea730d25986cad328fe6b6d3f3217bafb87a54cd69de367b1efd4ed48",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -177,8 +176,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "fc747ab51db66ce19f6118668e6f67dec1279fd865d8fb3a517d599b0c16c19e",-        "checked": "2026-11-12",+        "sha256": "5186e564164bd6bf86b36ab1dd718590d858a9ab601fad62754a4ef4c3f00c29",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+19−18
@@ -4,7 +4,7 @@   "slug": "ltc331yt5-r6",   "title": "LTC331YT5/R6",   "brief": "Linearin Comparators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C2888112"     },     "distributor_check": {-      "checked_at": "2026-11-12T21:57:10Z",+      "checked_at": "2026-11-13T02:25:13Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,7 +50,7 @@         "number": "1",         "name": "+IN",         "type": "input",-        "description": "Positive comparator input with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V)."+        "description": "Positive comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V), the same as -IN."       },       {         "number": "2",@@ -62,19 +62,19 @@         "number": "3",         "name": "–IN",         "type": "input",-        "description": "Negative comparator input with a voltage range from (VS- - 0.1 V) to (VS+ + 0.1 V)."+        "description": "Negative comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V)."       },       {         "number": "4",         "name": "OUT",         "type": "output",-        "description": "Open-drain comparator output that needs an external pull-up resistor, with 30 mA typical sink drive at 5 V supply."+        "description": "Open-drain comparator output that sinks 30 mA typically at 5V supply and needs an external pull-up resistor."       },       {         "number": "5",         "name": "+VS",         "type": "power_in",-        "description": "Positive power supply, 1.8 V to 5.5 V operating range."+        "description": "Positive power supply, 1.8 V to 5.5 V operating range with 10.0 V absolute maximum between VS+ and VS-."       }     ],     "provenance": {@@ -82,18 +82,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",-        "primary_mode": "text+vision",-        "consensus_model": "claude-opus-5-5",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: LTC331YT5 is the standard SOT23-5L (marking CG7) with the pinout shown for 'LTC331 SOT23-5L / SC70-5",-          "vision extraction: provenance cannot be text-verified; needs consensus"+          "extractor flagged: The pin diagram text for the LTC331 SOT23-5L/SC70-5L is garbled. Pin numbers were mapped from the st; The datasheet shows a second SOT23-5L pinout for the LTC331R variant in which -IN and +IN are swappe"         ],         "pages_sent": 19,-        "cost_usd": 0.1389,-        "at": "2026-11-12T21:56:57"+        "cost_usd": 0.0264,+        "at": "2026-11-13T02:25:01"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/1f404461eb0742c1ad8ae73d930edb81.pdf",@@ -141,8 +140,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "937193403cc22bd44d529e77b34eb860f599a5d2343f399d1cc3ef87b3acf394",-        "checked": "2026-11-12",+        "sha256": "b8ae8a2ea730d25986cad328fe6b6d3f3217bafb87a54cd69de367b1efd4ed48",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -160,8 +159,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "fc747ab51db66ce19f6118668e6f67dec1279fd865d8fb3a517d599b0c16c19e",-        "checked": "2026-11-12",+        "sha256": "5186e564164bd6bf86b36ab1dd718590d858a9ab601fad62754a4ef4c3f00c29",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -627,5 +626,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Linearin Comparators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file