3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLTC331YT5
Linearin · Comparators · SOT-23-5L
LTC331YT5 from Linearin, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V), the same as -IN. |
| 2 | -VS | power_in | Negative power supply (ground in single-supply use); supply voltage VS+ to VS- is 1.8 V to 5.5 V operating, 10.0 V absolute maximum. |
| 3 | -IN | input | Negative comparator input with a voltage range from (VS- - 0.1V) to (VS+ + 0.1V). |
| 4 | OUT | output | Open-drain comparator output that sinks 30 mA typically at 5V supply and needs an external pull-up resistor. |
| 5 | +VS | power_in | Positive power supply, 1.8 V to 5.5 V operating range with 10.0 V absolute maximum between VS+ and VS-. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Linearin |
| Package | SOT-23-5L |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -5 | 1 | 5 | mV | VCM = 0 | 3 |
| Offset voltage drift | VOS TC | -2 | 2 | μV/℃ | TA = −40 to +85 ℃ | 3 | |
| Power supply rejection ratio | PSRR | 70 | 82 | dB | VS = 1.8 to 5.5 V, VCM < (VS+ − 1V) | 3 | |
| Power supply rejection ratio | PSRR | 66 | dB | TA = −40 to +85 ℃ | 3 | ||
| Input bias current | IB | 5 | 30 | pA | VCM = VS+ /2 | 3 | |
| Input bias current | IB | 800 | pA | TA = −40 to +85 ℃ | 3 | ||
| Input offset current | IOS | 10 | 50 | pA | VCM = VS+ /2 | 3 | |
| Input offset current | IOS | 1000 | pA | TA = −40 to +85 ℃ | 3 | ||
| Common-mode rejection ratio | CMRR | 61 | 78 | dB | VS = 5.5 V, VCM = −0.1 to 5.5 V | 3 | |
| Common-mode rejection ratio | CMRR | 58 | dB | VCM = 0 to 5.3 V, TA = −40 to +85 ℃ | 3 | ||
| Common-mode rejection ratio | CMRR | 58 | 77 | dB | VS = 1.8 V, VCM = −0.1 to 1.8 V | 3 | |
| Common-mode rejection ratio | CMRR | 55 | dB | VCM = 0 to 1.6 V, TA = −40 to +85 ℃ | 3 | ||
| Low output voltage swing | VOL | 50 | 80 | mV | ISINK = 1 mA | 3 | |
| Low output voltage swing | VOL | 90 | mV | TA = −40 to +85 ℃ | 3 | ||
| Output short-circuit current | ISC | -30 | -25 | mA | Sink current | 3 | |
| Operating supply voltage | VS | 1.8 | 5.5 | V | 3 | ||
| Quiescent current (per comparator) | IQ | 32 | 40 | μA | VS = 1.8 V, VCM = 0.5V, IO = 0 | 3 | |
| Quiescent current (per comparator) | IQ | 50 | μA | TA = −40 to +85 ℃ | 3 | ||
| Quiescent current (per comparator) | IQ | 37 | 45 | μA | VS = 5.5 V, VCM = 0.5V, IO = 0 | 3 | |
| Quiescent current (per comparator) | IQ | 60 | μA | TA = −40 to +85 ℃ | 3 | ||
| Operating temperature range | TA | -40 | 85 | ℃ | 4 | ||
| Supply voltage, VS+ to VS- | 10 | V | 2 | ||||
| Signal input terminals: current | -10 | 10 | mA | Signal input terminals | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | ℃ | 2 | ||
| Junction temperature | TJ | 150 | ℃ | 2 | |||
| Lead temperature range (soldering) | 260 | ℃ | Soldering 10 sec | 2 | |||
| Electrostatic discharge voltage, human body model | -5000 | 5000 | V | HBM, per MIL-STD-883J / Method 3015.9 | 2 | ||
| Electrostatic discharge voltage, charged device model | -2000 | 2000 | V | CDM, per ESDA/JEDEC JS-002-2014 | 2 | ||
| Electrostatic discharge voltage, machine model | -250 | 250 | V | MM, per JESD22-A115C | 2 | ||
| Package thermal resistance, SOT23-5L | θJA | 190 | ℃/W | SOT23-5L | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LTC331YT5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.25 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ltc331yt5-r6-etched.step/ltc331yt5-r6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc331yt5-r6.step/ltc331yt5-r6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Linearin datasheet (19 pp, sha256
8b7b5b36fa34469b, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).