component
LTC2965IMS#PBF
Public Made by Adomby adom
Analog Devices Monitors & Reset Circuits, MSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291
{
"slug": "ltc2965ims-pbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Monitors & Reset Circuits, MSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"ltc2965ims#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ltc2965ims-pbf.kicad_sym",
"ltc2965ims-pbf.kicad_mod",
"ltc2965ims-pbf.glb",
"ltc2965ims-pbf.step",
"ltc2965ims-pbf.lbr",
"docs/hero.png",
"docs/ltc2965ims-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ltc2965ims-pbf-hero.glb",
"ltc2965ims-pbf-hero.overlay.json",
"ltc2965ims-pbf-etched.glb"
],
"component": {
"mpn": "LTC2965IMS#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-16",
"pin_count": 16,
"category": "Power Management ICs",
"subcategory": "Monitors & Reset Circuits",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/2965fc.pdf",
"parts": {
"symbol": "ltc2965ims-pbf.kicad_sym",
"footprint": "ltc2965ims-pbf.kicad_mod",
"model_3d": "ltc2965ims-pbf-hero.glb",
"model_3d_plain": "ltc2965ims-pbf-etched.glb",
"model_3d_step": "ltc2965ims-pbf-etched.step",
"model_3d_step_plain": "ltc2965ims-pbf.step",
"lbr": "ltc2965ims-pbf.lbr"
},
"distributor_links": {
"lcsc": "C683872",
"digikey": "505-LTC2965IMS#PBF-ND",
"mouser": "584-LTC2965IMS#PBF"
},
"distributor_check": {
"checked_at": "2026-10-30T21:17:49Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LTC2965IMS#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LTC2965IMS#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VIN",
"type": "power_in",
"description": "Voltage monitor and supply input connected to an internal high-value resistive divider; the output is pulled low if VIN falls below the UVLO threshold minus hysteresis, and output logic is not guaranteed below 1.2V."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "3",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "4",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "5",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "6",
"name": "REF",
"type": "power_out",
"description": "Buffered reference output at VREF with respect to GND; bypass with a maximum of 1nF unless a damping resistor is used."
},
{
"number": "7",
"name": "INH",
"type": "input",
"description": "High comparator reference input whose voltage is multiplied by the range setting to set the VIN rising threshold; keep it within the common-mode range VCM (0.35V to 2.45V) or tie it to GND to enable built-in hysteresis."
},
{
"number": "8",
"name": "INL",
"type": "input",
"description": "Low comparator reference input whose voltage is multiplied by the range setting to set the VIN falling threshold; keep it within VCM or tie it to GND to enable built-in hysteresis, since oscillation occurs if INL is greater than INH unless built-in hysteresis is enabled."
},
{
"number": "9",
"name": "PS",
"type": "input",
"description": "Polarity select input; connect to REF or to a voltage above VTH for an inverting output with respect to VIN, or to GND for a noninverting output."
},
{
"number": "10",
"name": "RS",
"type": "input",
"description": "Range select input; connect to GND for the 10x range (RS = L) or to REF for the 40x range (RS = H)."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Device ground, the reference for all voltages on the part."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "13",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "14",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "15",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; this unconnected pin sits between high-voltage and low-voltage pins to help maintain PCB trace clearance."
},
{
"number": "16",
"name": "OUT",
"type": "output",
"description": "Comparator output with a high-voltage active pull-down and a gated 500kΩ pull-up to an internal supply of 3.5V to 5V; it can be externally pulled up to 100V and is pulled low during UVLO."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet only states that the NC pins are unconnected and provides clearance spacing between hi; VIN is both the monitored input and a supply input, and REF is a reference output; the KiCad types (",
"2/16 pins cited to the wrong page (name found elsewhere): ['11:GND@p5', '15:NC@p11']"
],
"pages_sent": 18,
"cost_usd": 0.0993,
"at": "2026-10-30T21:17:31"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/2965fc.pdf",
"pages": 18,
"sha256": "a4223d1da4bb030d",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ltc2965ims-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "53aec19b531c5ed5b9a5d8fef387389bff1661eb536898003c89ef73882b28a0",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ltc2965ims-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3f5d76a5601bd8de41ca3542dd3469af79e1a938814829dedb08347774e087d4",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "MS16",
"source_page": 16,
"D": {
"nom_mm": 4.039,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 4.9,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.1,
"range_mm": [
null,
1.1
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ltc2965ims-pbf.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}