main
Ray Publish 0.1.0 b2fc89a
{
  "slug": "ltc2965hdd",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Power Management ICs, DFN-8-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ltc2965hdd#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc2965hdd.kicad_sym",
    "ltc2965hdd.kicad_mod",
    "ltc2965hdd.glb",
    "ltc2965hdd.step",
    "ltc2965hdd.lbr",
    "docs/hero.png",
    "docs/ltc2965hdd-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc2965hdd-hero.glb",
    "ltc2965hdd-hero.overlay.json"
  ],
  "component": {
    "mpn": "LTC2965HDD",
    "manufacturer": "Analog Devices",
    "package": "DFN-8-EP(3x3)",
    "pin_count": 9,
    "category": "Power Management ICs",
    "subcategory": "Power Management ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/2965fc.pdf",
    "parts": {
      "symbol": "ltc2965hdd.kicad_sym",
      "footprint": "ltc2965hdd.kicad_mod",
      "model_3d": "ltc2965hdd-hero.glb",
      "model_3d_plain": "ltc2965hdd.glb",
      "model_3d_step": "ltc2965hdd-etched.step",
      "model_3d_step_plain": "ltc2965hdd.step",
      "lbr": "ltc2965hdd.lbr"
    },
    "distributor_links": {
      "lcsc": "C683866",
      "digikey": "LTC2965HDD#PBF-ND",
      "mouser": "584-LTC2965HDD#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-11-19T05:42:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LTC2965HDD#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC2965HDD#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Voltage monitor and supply input (3.5V to 100V operating, 3.5V to 98V monitoring range, absolute maximum 140V) connected to an internal high-value resistive divider, with OUT pulled low if VIN falls below the UVLO threshold minus hysteresis."
      },
      {
        "number": "2",
        "name": "REF",
        "type": "power_out",
        "description": "Buffered reference output of 2.402V typical referenced to GND, usable as logic high for RS and PS and as the bias for the INH/INL dividers, with a maximum 1nF bypass unless a damping resistor is used."
      },
      {
        "number": "3",
        "name": "INH",
        "type": "input",
        "description": "High comparator reference input whose voltage times the range setting (10x or 40x) sets the VIN rising threshold, to be kept within VCM (0.35V to 2.45V) or tied to GND to enable built-in hysteresis."
      },
      {
        "number": "4",
        "name": "INL",
        "type": "input",
        "description": "Low comparator reference input whose voltage times the range setting sets the VIN falling threshold, to be kept within VCM (0.35V to 2.45V) or tied to GND to enable built-in hysteresis, with oscillation if INL > INH unless built-in hysteresis is enabled."
      },
      {
        "number": "5",
        "name": "PS",
        "type": "input",
        "description": "Polarity selection input that makes OUT inverting with respect to VIN when connected to REF or a voltage above VTH (1.4V max), or noninverting when connected to GND."
      },
      {
        "number": "6",
        "name": "RS",
        "type": "input",
        "description": "Range select input that selects 10x when connected to GND or 40x when connected to REF, with a threshold of 0.4V min to 1.4V max."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground."
      },
      {
        "number": "8",
        "name": "OUT",
        "type": "output",
        "description": "Comparator output with a high-voltage active pull-down and a gated 500k pull-up to an internal supply of 3.5V to 5V, resistively pull-up capable to 100V (absolute maximum 140V), pulled low when the part is in UVLO."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "power_in",
        "description": "Exposed pad (pin 9, DD8 only) that may be left floating or connected to device ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The DD-package pin numbers were reconstructed from a garbled top-view text extract (pin-number and n"
        ],
        "pages_sent": 18,
        "cost_usd": 0.0564,
        "at": "2026-11-19T05:42:40"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/2965fc.pdf",
        "pages": 18,
        "sha256": "a4223d1da4bb030d",
        "source_tier": "mfr",
        "citation": "Analog Devices datasheet"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc2965hdd.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7ac1f9351cd4f5a15ae5f6d4c9821e491048fcfe88512d26209d369378a5b80c",
        "checked": "2026-11-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc2965hdd-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "58474eccb5aa4e65776a8d3fe39eedea40ab35f1b9116d65e245a81edebb07d8",
        "checked": "2026-11-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DD8",
      "source_page": 15,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          2.9,
          3.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          0.7,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ltc2965hdd.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}