main
History Download
Ray Publish 0.1.0 b2fc89a

LTC2965HDD#PBF

Analog Devices · Power Management ICs · DFN-8-EP(3x3)

LTC2965HDD#PBF from Analog Devices, in a DFN-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Voltage monitor and supply input (3.5V to 100V operating, 3.5V to 98V monitoring range, absolute maximum 140V) connected to an internal high-value resistive divider, with OUT pulled low if VIN falls below the UVLO threshold minus hysteresis.
2 REF power_out Buffered reference output of 2.402V typical referenced to GND, usable as logic high for RS and PS and as the bias for the INH/INL dividers, with a maximum 1nF bypass unless a damping resistor is used.
3 INH input High comparator reference input whose voltage times the range setting (10x or 40x) sets the VIN rising threshold, to be kept within VCM (0.35V to 2.45V) or tied to GND to enable built-in hysteresis.
4 INL input Low comparator reference input whose voltage times the range setting sets the VIN falling threshold, to be kept within VCM (0.35V to 2.45V) or tied to GND to enable built-in hysteresis, with oscillation if INL > INH unless built-in hysteresis is enabled.
5 PS input Polarity selection input that makes OUT inverting with respect to VIN when connected to REF or a voltage above VTH (1.4V max), or noninverting when connected to GND.
6 RS input Range select input that selects 10x when connected to GND or 40x when connected to REF, with a threshold of 0.4V min to 1.4V max.
7 GND power_in Device ground.
8 OUT output Comparator output with a high-voltage active pull-down and a gated 500k pull-up to an internal supply of 3.5V to 5V, resistively pull-up capable to 100V (absolute maximum 140V), pulled low when the part is in UVLO.
9 EP power_in Exposed pad (pin 9, DD8 only) that may be left floating or connected to device ground.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-8-EP(3x3)
Category Power Management ICs
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Input Supply Operating Range VIN 3.5 100 V Full operating temperature range (l) 3
VIN Monitor Range VMON 3.5 98 V 3
VIN Input Supply Current IVIN 3 7 15 µA VIN = 100V, 40x; full operating temperature range (l) 3
Undervoltage Lockout VIN Rising VUVLO 3 V VIN Rising; full operating temperature range (l) 3
Comparator Common Mode Voltage VCM 0.35 2.45 V Full operating temperature range (l) 3
VIN Error Voltage at 96V VERR -1360 250 1360 mV INH = VREF, 40x; full operating temperature range (l) 3
VIN Error Voltage at 96V VERR -400 250 400 mV 0.35V ≤ INH ≤ 2.4V, 40x; full operating temperature range (l) 3
VIN Error Voltage at 24V VERR -315 35 315 mV INH = VREF, 10x; full operating temperature range (l) 3
VIN Error Voltage at 24V VERR -75 35 75 mV 0.35V ≤ INH ≤ 2.4V, 10x; full operating temperature range (l) 3
Comparator Offset Voltage VOS -3 1.9 3 mV INH = 0.35V, 10x; full operating temperature range (l) 3
Internal Resistive Divider Range Error AVERR -0.4 0.4 % INH = 2.4V, Range = 10x, 40x; full operating temperature range (l) 3
Comparator Built-in Hysteresis VHYS 14 22 30 mV INH = GND, INL Rising, VIN = 24V; full operating temperature range (l) 3
Comparator Built-in Hysteresis VHYS -30 -22 -14 mV INL = GND, INH Falling, VIN = 24V; full operating temperature range (l) 3
Built-in Hysteresis Enable Threshold VHYTH 100 175 mV Full operating temperature range (l) 3
VIN to OUT Comparator Propagation Delay tPD 40 80 µs Overdrive = 10%, OUT Falling, 10x; INH = GND, INL = 1.2V; full operating temperature range (l) 3
Input Leakage Current (INH, INL) H-Grade IIN(LKG) -10 0.1 10 nA V = 1.2V, H-Grade; full operating temperature range (l) 3
Reference Output Voltage VREF 2.378 2.402 2.426 V IREF ≤ 100µA, VIN ≥ 3.5V; full operating temperature range (l) 3
Select Input Threshold VTH 0.4 1.4 V Full operating temperature range (l) 3
Input Leakage Current ILKG -100 100 nA V = 2.4V; full operating temperature range (l) 3
Voltage Output Low VOL 100 mV VIN = 1.25V, I = 10µA; full operating temperature range (l) 3
Voltage Output Low VOL 400 mV VIN = 3.5V, I = 500µA; full operating temperature range (l) 3
Voltage Output High VOH 2 2.375 2.75 V VIN = 3.5V, I = -1µA; full operating temperature range (l) 3
Voltage Output High VOH 2.8 3 4 V VIN ≥ 4.5V, I = -1µA; full operating temperature range (l) 3
Output Current High IOH -15 -7.5 -5 µA V = GND, VIN = 3.5V; full operating temperature range (l) 3
Leakage Current, Output High IO(LKG) -250 250 nA V = 100V, VIN = 6V; full operating temperature range (l) 3
VIN Absolute Maximum Voltage VIN -0.3 140 V 2
PS, RS Absolute Maximum Voltage PS, RS -0.3 6 V 2
INH, INL Absolute Maximum Voltage INH, INL -0.3 6 V 2
OUT Absolute Maximum Voltage OUT -0.3 140 V 2
VIN Average Current VIN -20 mA Average current 2
OUT Average Current OUT -5 5 mA Average current 2
REF Average Current REF -5 5 mA Average current 2
INH, INL Average Current INH, INL -1 mA Average current 2
Storage Temperature Range -65 150 °C 2
Operating Ambient Temperature Range H-Grade -40 125 °C LTC2965H 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance, Junction to Ambient (DD8 DFN) θJA 43 °C/W DD package 2

CAD (KiCad official)

  • Symbol: LTC2965HDD#PBF
  • Footprint: Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm
  • 3D model: DFN-8-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ltc2965hdd-etched.step / ltc2965hdd-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2965hdd.step / ltc2965hdd.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 a4223d1da4bb030d, retrieved 2026-11-19)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF