main
Ray
Publish 0.1.0
aa9be78
LTC2909ITS8-5#TRMPBF
Analog Devices · Monitors & Reset Circuits · TSOT-23-8
LTC2909ITS8-5#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ1 | input | Adjustable low-voltage input with a 0.5V nominal threshold (0.4925V to 0.5075V), absolute maximum -0.3V to 7.5V, with input polarity set by the SEL pin. |
| 2 | ADJ2 | input | Adjustable low-voltage input with a 0.5V nominal threshold (0.4925V to 0.5075V), absolute maximum -0.3V to 7.5V, with input polarity set by the SEL pin. |
| 3 | REF | output | Buffered 1V reference output (0.985V to 1.015V when VCC > 2.175V) for negative supply offset, rated for ±1mA terminal current. |
| 4 | GND | power_in | Ground reference; all voltages are referenced to this pin. |
| 5 | RST | output | Open-drain active-low reset output with absolute maximum -0.3V to 7.5V and output low voltage of 0.10V maximum at VCC = 3V and 2500μA. |
| 6 | VCC | power_in | Supply input with a 6.5V internal shunt regulator (6.0V to 6.9V), absolute maximum 6V and ±10mA terminal current; a series dropping resistor is required for higher supplies. |
| 7 | TMR | passive | Reset timeout timing pin: external capacitor sets the timeout, the pin can be tied to VCC for a disabled timer, or tied low for the preset 200ms internal timeout; maximum voltage is VCC + 0.3V. |
| 8 | SEL | input | Three-state input polarity select: low level below 0.4V, high level above 1.4V, and open (floating) state with 0.9V pin voltage; absolute maximum -0.3V to 7.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Power Management |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LTC2909ITS8-5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ltc2909its8-5-trmpbf-etched.step/ltc2909its8-5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2909its8-5-trmpbf.step/ltc2909its8-5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
35475090990f5abb, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC2909ITS8-5#TRMPBF
**Analog Devices** · Monitors & Reset Circuits · TSOT-23-8
LTC2909ITS8-5#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ1 | input | Adjustable low-voltage input with a 0.5V nominal threshold (0.4925V to 0.5075V), absolute maximum -0.3V to 7.5V, with input polarity set by the SEL pin. |
| 2 | ADJ2 | input | Adjustable low-voltage input with a 0.5V nominal threshold (0.4925V to 0.5075V), absolute maximum -0.3V to 7.5V, with input polarity set by the SEL pin. |
| 3 | REF | output | Buffered 1V reference output (0.985V to 1.015V when VCC > 2.175V) for negative supply offset, rated for ±1mA terminal current. |
| 4 | GND | power_in | Ground reference; all voltages are referenced to this pin. |
| 5 | RST | output | Open-drain active-low reset output with absolute maximum -0.3V to 7.5V and output low voltage of 0.10V maximum at VCC = 3V and 2500μA. |
| 6 | VCC | power_in | Supply input with a 6.5V internal shunt regulator (6.0V to 6.9V), absolute maximum 6V and ±10mA terminal current; a series dropping resistor is required for higher supplies. |
| 7 | TMR | passive | Reset timeout timing pin: external capacitor sets the timeout, the pin can be tied to VCC for a disabled timer, or tied low for the preset 200ms internal timeout; maximum voltage is VCC + 0.3V. |
| 8 | SEL | input | Three-state input polarity select: low level below 0.4V, high level above 1.4V, and open (floating) state with 0.9V pin voltage; absolute maximum -0.3V to 7.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Power Management |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LTC2909ITS8-5#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `ltc2909its8-5-trmpbf-etched.step` / `ltc2909its8-5-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc2909its8-5-trmpbf.step` / `ltc2909its8-5-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/2909fb.pdf) (16 pp, sha256 `35475090990f5abb`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc2909its8-5-trmpbf-datasheet.pdf)