main
Ray
Publish 0.1.0
2745573
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241
{
"slug": "ltc2855ign",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices RS-485/RS-422 ICs, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"ltc2855ign#trpbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ltc2855ign.kicad_sym",
"ltc2855ign.kicad_mod",
"ltc2855ign.glb",
"ltc2855ign.step",
"ltc2855ign.lbr",
"docs/hero.png",
"docs/ltc2855ign-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ltc2855ign-hero.glb",
"ltc2855ign-hero.overlay.json"
],
"component": {
"mpn": "LTC2855IGN",
"manufacturer": "Analog Devices",
"package": "SSOP-16-150mil",
"pin_count": 16,
"category": "Interface ICs",
"subcategory": "RS-485/RS-422 ICs",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/285455fc.pdf",
"parts": {
"symbol": "ltc2855ign.kicad_sym",
"footprint": "ltc2855ign.kicad_mod",
"model_3d": "ltc2855ign-hero.glb",
"model_3d_plain": "ltc2855ign.glb",
"model_3d_step": "ltc2855ign-etched.step",
"model_3d_step_plain": "ltc2855ign.step",
"lbr": "ltc2855ign.lbr"
},
"distributor_links": {
"lcsc": "C682803",
"digikey": "LTC2855IGN#TRPBFTR-ND",
"mouser": "584-LTC2855IGN#TRPBF"
},
"distributor_check": {
"checked_at": "2026-11-13T10:06:55Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LTC2855IGN#TRPBFTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-LTC2855IGN#TRPBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "RO",
"type": "output",
"description": "Receiver output: goes high when A > B by 200mV and low when A < B by 200mV, and stays high if the inputs are open, shorted, or terminated without a signal; it is high-impedance when the receiver is disabled (RE high)."
},
{
"number": "2",
"name": "RE",
"type": "input",
"description": "Receiver enable: a low enables the receiver, and a high forces RO into a high-impedance state."
},
{
"number": "3",
"name": "DE",
"type": "input",
"description": "Driver enable: a high enables the driver and a low forces the driver outputs into high impedance; with RE high and TE low the part enters low-power shutdown."
},
{
"number": "4",
"name": "DI",
"type": "input",
"description": "Driver input: with the driver enabled, a low on DI drives Y low and Z high, and a high on DI drives Y high and Z low."
},
{
"number": "5",
"name": "TE",
"type": "input",
"description": "Internal termination enable: a high connects a 120Ω typical termination resistor between pins A and B."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "8",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "11",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "12",
"name": "Y",
"type": "output",
"description": "Positive (non-inverting) driver output for the LTC2855; driver outputs are protected from shorts to any voltage between (VCC -15V) and +15V and have ESD protection of ±15kV HBM."
},
{
"number": "13",
"name": "Z",
"type": "output",
"description": "Negative (inverting) driver output for the LTC2855; driver outputs are protected from shorts to any voltage between (VCC -15V) and +15V and have ESD protection of ±15kV HBM."
},
{
"number": "14",
"name": "B",
"type": "input",
"description": "Negative receiver input; the receiver input resistance is greater than 96kΩ (C-, I-Grade) with termination disabled, and the common-mode range is -7V to +12V."
},
{
"number": "15",
"name": "A",
"type": "input",
"description": "Positive receiver input; the receiver input resistance is greater than 96kΩ (C-, I-Grade) with termination disabled, and the common-mode range is -7V to +12V."
},
{
"number": "16",
"name": "VCC",
"type": "power_in",
"description": "Positive supply, specified for 3.0V to 3.6V; bypass with a 0.1µF ceramic capacitor."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The GN16 pin diagram text on page 2 is scrambled in extraction. Pin numbers were taken from the Pin ; The datasheet does not number the NC pins individually. Pins 7 to 11 were inferred from the five NC ; A and B are typed as input because the LTC2855 is full-duplex and the datasheet describes A and B as"
],
"pages_sent": 18,
"cost_usd": 0.1011,
"at": "2026-11-13T10:06:42"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/285455fc.pdf",
"pages": 18,
"sha256": "78130b7ef684fd8c",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ltc2855ign.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.85
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ltc2855ign-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.85
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "fbfe90db15d348faa2419591ffd545fedc51976a7c86801aa3138805d8c8c9cb",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}