LTC2854IDD#TRPBF

{
  "schema_version": 1,
  "type": "component",
  "slug": "ltc2854idd-trpbf",
  "title": "LTC2854IDD#TRPBF",
  "brief": "Analog Devices RS-485 / RS-422 ICs, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "ltc2854idd#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LTC2854IDD#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "Interface",
    "subcategory": "RS-485 / RS-422 ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916567664955392",
    "parts": {
      "symbol": "ltc2854idd-trpbf.kicad_sym",
      "footprint": "ltc2854idd-trpbf.kicad_mod",
      "model_3d": "ltc2854idd-trpbf-hero.glb",
      "model_3d_plain": "ltc2854idd-trpbf-etched.glb",
      "model_3d_step": "ltc2854idd-trpbf-etched.step",
      "model_3d_step_plain": "ltc2854idd-trpbf.step",
      "lbr": "ltc2854idd-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C730043",
      "digikey": "LTC2854IDD#TRPBFTR-ND",
      "mouser": "584-LTC2854IDD#TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:47:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LTC2854IDD#TRPBFTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "584-LTC2854IDD#TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RO",
        "type": "output",
        "description": "Receiver Output: with the receiver enabled (RE low), RO is high when A > B by 200mV and low when A < B by 200mV, and it is high if the inputs are open, shorted, or terminated without a signal."
      },
      {
        "number": "2",
        "name": "RE",
        "type": "input",
        "description": "Receiver Enable: a low enables the receiver, and a high forces the receiver output into a high-impedance state."
      },
      {
        "number": "3",
        "name": "DE",
        "type": "input",
        "description": "Driver Enable: a high enables the driver, a low forces the driver outputs into high impedance, and if RE is high with DE and TE low the part enters a low-power shutdown state."
      },
      {
        "number": "4",
        "name": "DI",
        "type": "input",
        "description": "Driver Input: with the driver enabled (DE high), a low on DI drives the positive driver output low and the negative output high, and a high drives the positive output high and the negative output low."
      },
      {
        "number": "5",
        "name": "TE",
        "type": "input",
        "description": "Internal Termination Resistance Enable: a high connects a termination resistor (120Ω typical) between pins A and B."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "8",
        "name": "A",
        "type": "bidirectional",
        "description": "Positive receiver input and, on the half-duplex LTC2854, positive driver output; the receiver input resistance is greater than 96kΩ when termination is disabled (C-, I-Grade)."
      },
      {
        "number": "9",
        "name": "B",
        "type": "bidirectional",
        "description": "Negative receiver input and, on the half-duplex LTC2854, negative driver output; the receiver input resistance is greater than 96kΩ when termination is disabled (C-, I-Grade)."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply, 3.0V < VCC < 3.6V; bypass with a 0.1µF ceramic capacitor."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed backside thermal pad, connected to ground; the datasheet specifies the PCB GND connection for this pad."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers were assigned from the 'PIN FUNCTIONS' parenthetical lists (e.g. 'A (Pins 8/11/15)', 'VC; Pin 11 is the exposed pad on the DD package, not a lead; it is listed as GND power_in per the datash; Pin 7 is marked NC on the DD top view; the datasheet does not give further detail for it."
        ],
        "pages_sent": 18,
        "cost_usd": 0.0957,
        "at": "2026-10-18T02:43:44"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916567664955392",
        "pages": 18,
        "sha256": "78130b7ef684fd8c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc2854idd-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc2854idd-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "02ce347ae5d261914e7b4b3147a2c6f9cf6189312f55dac5b5dd028b6892c810",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Analog Devices",
      "Package": "DFN-10-EP(3x3)",
      "Category": "Interface",
      "Pins": "11"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "78130b7ef684fd8c5b22b733f363222c57f6211edbf6f7205976430dcd01c380",
      "rows": [
        {
          "name": "Differential driver output voltage, R = ∞",
          "symbol": "|VOD|",
          "kind": "electrical",
          "unit": "V",
          "min": 1.5,
          "typ": null,
          "max": null,
          "conditions": "R = ∞, VCC = 3V (Figure 1)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Differential driver output voltage, R = 27Ω",
          "symbol": "|VOD|",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "R = 27Ω, VCC = 3V (Figure 1)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Change in magnitude of driver differential output voltage for complementary states",
          "symbol": "D|VOD|",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "R = 27Ω or R = 50Ω (Figure 1)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Driver common mode output voltage",
          "symbol": "VOC",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 3,
          "conditions": "R = 27Ω or R = 50Ω (Figure 1)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Change in magnitude of driver common mode output voltage for complementary states",
          "symbol": "D|VOC|",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "R = 27Ω or R = 50Ω (Figure 1)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum driver short-circuit current",
          "symbol": "IOSD",
          "kind": "electrical",
          "unit": "mA",
          "min": -250,
          "typ": 180,
          "max": 300,
          "conditions": "–7V ≤ (Y or Z) ≤ 12V (Figure 2)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver input current (A, B), C-, I-Grade, VIN = 12V",
          "symbol": "IIN",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 125,
          "conditions": "DE = TE = 0V, VCC = 0V or 3.3V, VIN = 12V (Figure 3) (C-, I-Grade)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver input current (A, B), C-, I-Grade, VIN = -7V",
          "symbol": "IIN",
          "kind": "electrical",
          "unit": "µA",
          "min": -100,
          "typ": null,
          "max": null,
          "conditions": "DE = TE = 0V, VCC = 0V or 3.3V, VIN = –7V (Figure 3) (C-, I-Grade)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver input resistance (C-, I-Grade)",
          "symbol": "RIN",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 96,
          "typ": 125,
          "max": null,
          "conditions": "RE = VCC or 0V, DE = TE = 0V, VIN = –7V, –3V, 3V, 7V, 12V (Figure 3) (C-, I-Grade)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver differential input threshold voltage",
          "symbol": "VTH",
          "kind": "electrical",
          "unit": "V",
          "min": -0.2,
          "typ": null,
          "max": 0.2,
          "conditions": "–7V ≤ B ≤ 12V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver output HIGH voltage",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.4,
          "typ": null,
          "max": null,
          "conditions": "I(RO) = –4mA, A-B = 200mV, VCC = 3V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver output LOW voltage",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "I(RO) = 4mA, A-B = –200mV, VCC = 3V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver three-state output current on RO",
          "symbol": "IOZR",
          "kind": "electrical",
          "unit": "µA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "RE = VCC, 0V ≤ RO ≤ VCC",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver short-circuit current",
          "symbol": "IOSR",
          "kind": "electrical",
          "unit": "mA",
          "min": -85,
          "typ": null,
          "max": 85,
          "conditions": "0V ≤ RO ≤ VCC",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Receiver input terminating resistor",
          "symbol": "RTERM",
          "kind": "electrical",
          "unit": "Ω",
          "min": 108,
          "typ": 120,
          "max": 156,
          "conditions": "TE = VCC, VAB = 2V, VB = –7V, 0V, 10V (Figure 8)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Logic input high voltage",
          "symbol": "VIH",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "VCC = 3.6V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Logic input low voltage",
          "symbol": "VIL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "VCC = 3V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Logic input current",
          "symbol": "IINL",
          "kind": "electrical",
          "unit": "µA",
          "min": -10,
          "typ": 0,
          "max": 10,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply current in shutdown mode (C-, I-Grade)",
          "symbol": "ICCS",
          "kind": "electrical",
          "unit": "µA",
          "min": 0,
          "typ": null,
          "max": 5,
          "conditions": "DE = 0V, RE = VCC, TE = 0V (C-, I-Grade)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply current in receive mode",
          "symbol": "ICCR",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 370,
          "max": 900,
          "conditions": "DE = 0V, RE = 0V, TE = 0V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum data rate",
          "symbol": "fMAX",
          "kind": "timing",
          "unit": "Mbps",
          "min": 20,
          "typ": null,
          "max": null,
          "conditions": "Note 3",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver input to output propagation delay",
          "symbol": "tPLHD, tPHLD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 10,
          "max": 50,
          "conditions": "RDIFF = 54Ω, CL = 100pF (Figure 4)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver input to output propagation delay difference",
          "symbol": "DtPD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 1,
          "max": 6,
          "conditions": "RDIFF = 54Ω, CL = 100pF (Figure 4)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver output Y to output Z skew",
          "symbol": "tSKEWD",
          "kind": "timing",
          "unit": "ns",
          "min": -6,
          "typ": 1,
          "max": 6,
          "conditions": "RDIFF = 54Ω, CL = 100pF (Figure 4)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver rise or fall time",
          "symbol": "tRD, tFD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 4,
          "max": 12.5,
          "conditions": "RDIFF = 54Ω, CL = 100pF (Figure 4)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver enable or disable time",
          "symbol": "tZLD, tZHD, tLZD, tHZD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 70,
          "conditions": "RL = 500Ω, CL = 50pF, RE = 0 (Figure 5)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Driver enable from shutdown",
          "symbol": "tZHSD, tZLSD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "RL = 500Ω, CL = 50pF, RE = VCC (Figure 5)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Time to shutdown",
          "symbol": "tSHDN",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "RL = 500Ω, CL = 50pF (DE = ↓, RE = VCC) or (DE = 0, RE ↑) (Figure 5)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver input to output propagation delay",
          "symbol": "tPLHR, tPHLR",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 50,
          "max": 70,
          "conditions": "CL = 15pF, VCM = 1.5V, |VAB| = 1.5V, tR and tF < 4ns (Figure 6)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Differential receiver skew",
          "symbol": "tSKEWR",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 1,
          "max": 6,
          "conditions": "CL = 15pF (Figure 6)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver output rise or fall time",
          "symbol": "tRR, tFR",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 3,
          "max": 12.5,
          "conditions": "CL = 15pF (Figure 6)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver enable/disable time",
          "symbol": "tZLR, tZHR, tLZR, tHZR",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "RL = 1k, CL = 15pF, DE = VCC (Figure 7)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Receiver enable from shutdown",
          "symbol": "tZHSR, tZLSR",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "RL = 1k, CL = 15pF, DE = 0V (Figure 7)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Termination enable or disable time",
          "symbol": "tRTEN, tRTZ",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "VB = 0V, VAB = 2V, RE = VCC, DE = 0V (Figure 8)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply current in transmit mode",
          "symbol": "ICCT",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 450,
          "max": 1000,
          "conditions": "No Load, DE = VCC, RE = VCC, TE = 0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply current with driver and receiver enabled",
          "symbol": "ICCTR",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 450,
          "max": 1000,
          "conditions": "No Load, DE = VCC, RE = 0V, TE = 0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply current in termination mode",
          "symbol": "ICCTERM",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 110,
          "max": 180,
          "conditions": "DE = 0V, RE = VCC, TE = VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply current in receive and termination mode",
          "symbol": "ICCTERMR",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 450,
          "max": 950,
          "conditions": "DE = 0V, RE = 0V, TE = VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply current in transmit and termination mode",
          "symbol": "ICCTERMT",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 470,
          "max": 1000,
          "conditions": "DE = VCC, RE = VCC, TE = VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply current with driver, receiver and termination enabled",
          "symbol": "ICCTERMTR",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 470,
          "max": 1000,
          "conditions": "DE = VCC, RE = 0V, TE = VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "ESD protection, RS485/RS422 pins A, B (LTC2854)",
          "symbol": "",
          "kind": "electrical",
          "unit": "kV",
          "min": -25,
          "typ": null,
          "max": 25,
          "conditions": "Human body model",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Logic input voltages (RE, DE, DI, TE)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Interface I/O voltage (A, B, Y, Z)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 15,
          "conditions": "Lower limit printed as (VCC –15V)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "(A-B) or (B-A) differential voltage with terminator enabled",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "Terminator enabled",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Receiver output voltage (RO)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "Upper limit printed as (VCC +0.3V) (Note 1)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Operating temperature, LTC2854I",
          "symbol": "",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Note 4",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Maximum junction temperature",
          "symbol": "TJMAX",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "DD package",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage operating range",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3,
          "typ": null,
          "max": 3.6,
          "conditions": "Pin functions text: VCC = 3.0V < VCC < 3.6V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-ambient thermal resistance",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 43,
          "max": null,
          "conditions": "DD package",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-case thermal resistance",
          "symbol": "θJC",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 2.96,
          "max": null,
          "conditions": "DD package",
          "source_page": 2,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ltc2854idd#trpbf"
  ],
  "discovery_pitch": "LTC2854IDD#TRPBF (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc2854idd-trpbf.kicad_sym",
    "ltc2854idd-trpbf.kicad_mod",
    "ltc2854idd-trpbf.glb",
    "ltc2854idd-trpbf.step",
    "ltc2854idd-trpbf.lbr",
    "docs/hero.png",
    "docs/ltc2854idd-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc2854idd-trpbf-hero.glb",
    "ltc2854idd-trpbf-hero.overlay.json",
    "ltc2854idd-trpbf-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}