component

LTC2850IMS8#TRPBF

Public Made by Adom

by adom

Analog Devices RS-485 / RS-422 ICs, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterfaceltc2850ims8#trpbffactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 13d ago
viewers ltc2850ims8-trpbf: viewers · Ray 13d ago
ltc2850ims8-trpbf-etched.glb Publish 0.1.0 · Ray 13d ago
ltc2850ims8-trpbf-etched.step ltc2850ims8-trpbf: factory component page (tier=lcsc) · Ray 13d ago
ltc2850ims8-trpbf-hero.glb ltc2850ims8-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray 13d ago
ltc2850ims8-trpbf-hero.overlay.json Publish 0.1.0 · Ray 13d ago
ltc2850ims8-trpbf.glb Publish 0.1.0 · Ray 13d ago
ltc2850ims8-trpbf.kicad_mod Publish 0.1.0 · Ray 13d ago
ltc2850ims8-trpbf.kicad_sym Publish 0.1.0 · Ray 13d ago
ltc2850ims8-trpbf.lbr Publish 0.1.0 · Ray 13d ago
ltc2850ims8-trpbf.step Publish 0.1.0 · Ray 13d ago
package.json Publish 0.1.0 · Ray 13d ago
page.json Set visibility: public · Ray 13d ago
README.md Publish 0.1.0 · Ray 13d ago

LTC2850IMS8#TRPBF

Analog Devices · RS-485 / RS-422 ICs · MSOP-8

LTC2850IMS8#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: goes high when A-B is greater than 200mV, low when A-B is less than -200mV, and stays high if the inputs are open, shorted, or terminated without a valid signal; it is high impedance when the receiver is disabled.
2 RE input Receiver enable: a low enables the receiver and a high forces the RO output into a high impedance state.
3 DE input Driver enable: a high enables the driver and a low forces the driver outputs into high impedance; with RE high and DE low the part enters low power shutdown.
4 DI input Driver input: with the driver enabled (DE high), a low on DI drives the positive output low and the negative output high, and a high on DI drives the positive output high and the negative output low.
5 GND power_in Ground reference for the device; all voltages are referenced to this pin.
6 A bidirectional Noninverting receiver input and noninverting driver output for the LTC2850; input impedance is greater than 96kΩ in receive mode or when unpowered, and the operating common mode range is -7V to 12V.
7 B bidirectional Inverting receiver input and inverting driver output for the LTC2850; input impedance is greater than 96kΩ in receive mode or when unpowered, and the operating common mode range is -7V to 12V.
8 VCC power_in Positive supply, specified for 3V ≤ VCC ≤ 3.6V; bypass with a 0.1µF ceramic capacitor.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VCC) VCC -0.3 7 V 2
Logic Input Voltages (RE, DE, DI) -0.3 7 V 2
Interface I/O A, B, Y, Z A, B, Y, Z 15 V min printed as (VCC, 15V) 2
Receiver Output Voltage (RO) RO -0.3 V max printed as (VCC + 0.3V) (Note 1) 2
Operating Temperature LTC285xI -40 85 °C LTC285xI (Industrial grade) 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 150 °C MS8 package 2
Supply Voltage (VCC) operating range VCC 3 3.6 V Positive supply pin function 9
Differential Driver Output Voltage /VOD/ /VOD/ 1.5 V R = ∞, VCC = 3V (Figure 1) 4
Differential Driver Output Voltage /VOD/ /VOD/ 2 V R = 27Ω, VCC = 3V (Figure 1) 4
Difference in Magnitude of Driver Differential Output Voltage Δ/VOD/ 0.2 V R = 27Ω or 50Ω (Figure 1) 4
Driver Common Mode Output Voltage VOC 3 V R = 27Ω or 50Ω (Figure 1) 4
Difference in Magnitude of Driver Common Mode Output Voltage Δ/VOC/ 0.2 V R = 27Ω or 50Ω (Figure 1) 4
Maximum Driver Short-Circuit Current IOSD -250 250 mA -7V ≤ (Y or Z) ≤ 12V (Figure 2) 4
Maximum Driver Short-Circuit Current (reverse, extreme cold) IOSD 300 mA -7V ≤ (Y or Z) ≤ 12V (Figure 2) 4
Receiver Input Current (A, B) at VIN = 12V (C, I-Grade) IIN 125 µA DE = TE = 0V, VCC = 0V or 3.3V, VIN = 12V (Figure 3) (C, I-Grade) 4
Receiver Input Current (A, B) at VIN = -7V (C, I-Grade) IIN -100 µA DE = TE = 0V, VCC = 0V or 3.3V, VIN = -7V, (Figure 3) (C, I-Grade) 4
Receiver Input Resistance (C, I-Grade) RIN 96 125 kΩ RE = VCC or 0V, DE = TE = 0V, VIN = -7V, -3V, 3V, 7V, 12V (Figure 3) (C, I-Grade) 4
Receiver Differential Input Threshold Voltage VTH -0.2 0.2 V -7V ≤ B ≤ 12V 4
Receiver Output High Voltage VOH 2.4 V I(RO) = -4mA, A-B = 200mV, VCC = 3V 4
Receiver Output Low Voltage VOL 0.4 V I(RO) = 4mA, A-B = -200mV, VCC = 3V 4
Receiver Three-State Output Current on RO IOZR -1 1 µA RE = VCC, 0V ≤ RO ≤ VCC (LTC2850, LTC2852) 4
Receiver Short-Circuit Current IOSR -85 85 mA 0V ≤ RO ≤ VCC 4
Logic Input High Voltage VIH 2 V VCC = 3.6V 4
Logic Input Low Voltage VIL 0.8 V VCC = 3V 4
Logic Input Current IINL -10 0 10 µA 4
Maximum Data Rate fMAX 20 Mbps Note 3 5
Driver Input to Output Propagation Delay tPLHD, tPHLD 10 50 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 5
Driver Input to Output Propagation Delay Difference ΔtPD 1 6 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 5
Driver Output Y to Output Z Skew tSKEWD -6 1 6 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 5
Driver Rise or Fall Time tRD, tFD 4 12.5 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 5
Driver Enable or Disable Time tZLD, tZHD, tLZD, tHZD 70 ns RL = 500Ω, CL = 50pF, RE = 0V (Figure 5) (LTC2850, LTC2852) 5
Driver Enable from Shutdown tZHSD, tZLSD 8 µs RL = 500Ω, CL = 50pF, RE = VCC (Figure 5) (LTC2850, LTC2852) 5
Time to Shutdown tSHDN 100 ns RL = 500Ω, CL = 50pF, (DE = ↓, RE = VCC) or (DE = 0V, RE = ↑) (Figure 5) (LTC2850, LTC2852) 5
Receiver Input to Output Propagation Delay tPLHR, tPHLR 50 70 ns CL = 15pF, VCM = 1.5V, /VAB/ = 1.5V, tR and tF < 4ns (Figure 6) 5
Differential Receiver Skew tSKEWR 1 6 ns CL = 15pF (Figure 6) 5
Receiver Output Rise or Fall Time tRR, tFR 3 12.5 ns CL = 15pF (Figure 6) 5
Receiver Enable/Disable Time tZLR, tZHR, tLZR, tHZR 50 ns RL =1k, CL =15pF, DE = VCC (Figure 7) (LTC2850, LTC2852) 5
Receiver Enable from Shutdown tZHSR, tZLSR 8 µs RL = 1k, CL = 15pF, DE = 0V (Figure 7) (LTC2850, LTC2852) 5
Supply Current in Shutdown Mode ICCS 0 5 µA DE = 0V, RE = VCC, LTC2850, LTC2852 (C and I-Grade) 5
Supply Current in Receive Mode ICCR 370 900 µA DE = 0V, RE = 0V (LTC2850, LTC2852) 5
Supply Current in Transmit Mode ICCT 450 1000 µA No Load, DE = VCC, RE = VCC (LTC2850, LTC2852) 5
Supply Current with Both Driver and Receiver Enabled ICCTR 450 1000 µA No Load, DE = VCC, RE = 0V 5
Thermal Resistance Junction-to-Ambient (MS8) θJA 200 °C/W MS8 (8-lead plastic MSOP) package 2
Thermal Resistance Junction-to-Case (MS8) θJC 40 °C/W MS8 (8-lead plastic MSOP) package 2

CAD (KiCad official)

  • Symbol: LTC2850IMS8#TRPBF
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ltc2850ims8-trpbf-etched.step / ltc2850ims8-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2850ims8-trpbf.step / ltc2850ims8-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 68e25e1cc3687b9f, retrieved 2026-10-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF