LTC2802IDE#PBF

{
  "slug": "ltc2802ide-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices RS232 ICs, DFN-12-EP(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "ltc2802ide#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc2802ide-pbf.kicad_sym",
    "ltc2802ide-pbf.kicad_mod",
    "ltc2802ide-pbf.glb",
    "ltc2802ide-pbf.step",
    "ltc2802ide-pbf.lbr",
    "docs/hero.png",
    "docs/ltc2802ide-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc2802ide-pbf-hero.glb",
    "ltc2802ide-pbf-hero.overlay.json",
    "ltc2802ide-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LTC2802IDE#PBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-12-EP(3x4)",
    "pin_count": 13,
    "category": "Interface ICs",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/2801234fe.pdf",
    "parts": {
      "symbol": "ltc2802ide-pbf.kicad_sym",
      "footprint": "ltc2802ide-pbf.kicad_mod",
      "model_3d": "ltc2802ide-pbf-hero.glb",
      "model_3d_plain": "ltc2802ide-pbf-etched.glb",
      "model_3d_step": "ltc2802ide-pbf-etched.step",
      "model_3d_step_plain": "ltc2802ide-pbf.step",
      "lbr": "ltc2802ide-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C580600",
      "digikey": "505-LTC2802IDE#PBF-ND",
      "mouser": "584-LTC2802IDE#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T09:22:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC2802IDE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC2802IDE#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RIN",
        "type": "input",
        "description": "RS-232 receiver input with an internal 5kΩ termination resistor, tolerant to ±25V per absolute maximum ratings."
      },
      {
        "number": "2",
        "name": "TOUT",
        "type": "output",
        "description": "RS-232 driver output, protected against overload and shorts to ground or up to ±15V."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Input supply of 1.8V to 5.5V, to be bypassed to GND with a 1µF capacitor."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_out",
        "description": "Generated positive supply for the RS-232 driver (7V), with a 1µF capacitor connected between VDD and GND."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "passive",
        "description": "Switch pin of the DC-DC converter; connect a 10µH inductor between SW and VCC."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "7",
        "name": "CAP",
        "type": "passive",
        "description": "Charge pump capacitor pin for the generated negative supply; connect a 220nF capacitor between CAP and SW."
      },
      {
        "number": "8",
        "name": "PS",
        "type": "input",
        "description": "Power supply control pin referenced to VL that enables the integrated DC-DC converter."
      },
      {
        "number": "9",
        "name": "MODE",
        "type": "input",
        "description": "Mode control pin referenced to VL that selects shutdown, receiver active, driver disabled or normal mode (Table 1), and serves as a driver enable for half-duplex use."
      },
      {
        "number": "10",
        "name": "VL",
        "type": "power_in",
        "description": "Logic supply of 1.8V to 5.5V for receiver outputs, driver inputs and control inputs, bypassed to GND with 220nF if not tied to VCC."
      },
      {
        "number": "11",
        "name": "TIN",
        "type": "input",
        "description": "Driver input referenced to VL."
      },
      {
        "number": "12",
        "name": "ROUT",
        "type": "output",
        "description": "Receiver output referenced to VL, short-circuit protected to GND/VCC/VL and high impedance in Shutdown mode."
      },
      {
        "number": "13",
        "name": "VEE",
        "type": "power_out",
        "description": "Generated negative supply for the RS-232 driver (-6.3V) on the exposed backside pad, with a 1µF capacitor between VEE and GND; must be soldered to the PCB."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types for SW, CAP, VDD and VEE are inferred from their function (switch node, charge-pump node, "
        ],
        "pages_sent": 18,
        "cost_usd": 0.1871,
        "at": "2026-10-31T09:22:30"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/2801234fe.pdf",
        "pages": 18,
        "sha256": "e9ad4ef1183d2db6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 13,
        "described": 13,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc2802ide-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "845020e85b5efd5390cabe9ebf6f19225aa2620525cfa849c1d3e9ca94a4ee1d",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc2802ide-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0e0e804d4482f79813a342f2f188c423e66d2353c62c6bd6b5b48a39709faab1",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DE12 (DE/UE package, 12-Lead Plastic DFN 4mm × 3mm, LTC DWG # 05-08-1695 Rev D)",
      "source_page": 14,
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ltc2802ide-pbf.step",
        "verdict": "SKIP",
        "reasons": [
          "the datasheet dimensions give no height or body size to compare"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}